1 / 4

First tests of the PCB PPS board in Ar /CO2 at 780 mmHg, gas flow

First tests of the PCB PPS board in Ar /CO2 at 780 mmHg, gas flow Test of PDP panel with Ar /CO2 7% Yan,meni,erez,dan Feb 1, 2011. Sunday: fill box with gas mixture Increase HV to ~1100 first pulses seen. Fast, clean. But no source available. Flow gas thru box overnight

tracy
Télécharger la présentation

First tests of the PCB PPS board in Ar /CO2 at 780 mmHg, gas flow

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. First tests of the PCB PPS board in Ar/CO2 at 780 mmHg, gas flow Test of PDP panel with Ar/CO2 7% Yan,meni,erez,dan Feb 1, 2011

  2. Sunday: fill box with gas mixture Increase HV to ~1100 first pulses seen. Fast, clean. But no source available. Flow gas thru box overnight Next day: discharges at 950, sparking- and sustained disharge. Increase Rq to 25 M See only spark type discharges.

  3. Monday: • Observed discoloration around sparking pixel. • can get to work in any sense of the term • Work with PPS PDP panel at 1 atmAr/CO2 • Make several measurements that showed conclusively that the panel responds to the SR-90 source. Hit rate and background increase with HV- until background starts to become very high (~ 4KHZ) on one pixel • Tuesday : inspect PCB board: pixels are damaged, white discoloration of the green PCB. Electrodes look very rough around edges. • Discharge appears to be across the surface. Probably greatly affected by the surface. • Move to un-dammaged pixel, try again • Can see signle pulses, but most are in large numbers

More Related