1 / 14

The Glue Method

The Glue Method. 1. Take a clean slide and carefully place a coverslip at one end of it. 2 . Put a small dab of superglue at one corner of the coverslip . superglue. 3. Locate your Drosophila larva and remove it from the test tube.

trey
Télécharger la présentation

The Glue Method

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Glue Method

  2. 1. Take a clean slide and carefully place a coverslip at one end of it.

  3. 2. Put a small dab of superglue at one corner of the coverslip. superglue

  4. 3. Locate your Drosophila larva and remove it from the test tube.

  5. 4. Place the larva in a Petri dish and rinse it with a small amount of water to remove any excess food.

  6. 5. Soak up remaining water with the corner of a paper towel or small tissue.

  7. 6. Gently pick up the larva with the tweezers and place it on your slide on the opposite side from your coverslip.

  8. 7. Place your slide under the microscope and adjust the lens on the larva. It should be on its stomach with its back facing upwards. You can distinguish the back from the stomach by the two “racing stripes” or trachea running along it. The stomach is noted by faint horizontal grooves with very fine black hairs. trachea Correct way Incorrect way

  9. 8. If the larva is facing the incorrect direction, simply turn it the right way by gently flipping it with your tweezers.

  10. 9. With a new set of tweezers used specifically for glue, take a small dab from the drop at the opposite end of your coverslip. You should only use a fractional amount; just enough to cover the head of your tweezers. Wiping off your tweezers after this procedure is essential so that they do not become glued shut.

  11. 10. Under the microscope, double check to make sure the larva is still in the correct position. If it has turned over, see step eight.Now, with the tweezers used to handle larva, pick up the larva and place it gently on the fresh patch of glue. Make sure the black mouth hooks are located near or at the edge of the coverslip and neither they or the brown spiracles come in contact with the glue. Mouth hooks Spiracles

  12. 11. Carefully press down on the larva to flatten it out.

  13. 12. Now that the larva is in place, you can administer any substance you wish them to ingest. This is best accomplished if you use a syringe to draw up liquid and place it in small doses by the larva’s head.

  14. 13. Finally, the heart rate can be observed by counting the number of pulses of the spiracles in one minute. Spiracles

More Related