1 / 9

Pure Zirconium

Pure Zirconium. Zirconium Oxide. History. Zirconium minerals have been around for a long time but have been known as either jargon, jacinth, and hyacinth Martin Henrich Klaproth who lived between 1742 and 1817, isolated the oxide of zirconium from zircon in 1789

troy-meyer
Télécharger la présentation

Pure Zirconium

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Pure Zirconium

  2. Zirconium Oxide

  3. History • Zirconium minerals have been around for a long time but have been known as either jargon, jacinth, and hyacinth • Martin Henrich Klaproth who lived between 1742 and 1817, isolated the oxide of zirconium from zircon in 1789 • Zirconium is 25% silica, 5% iron oxide, and 70% zirconia. • Metallic zirconium was first prepared in 1824 by Jons J. Berzelius, a Swedish chemist. • The zirconium-containing mineral zircon, or its variations (jargon, hyacinth, jacinth, or ligure), were mentioned in biblical writings • The mineral was not known to contain a new element until Klaproth analyzed a jargon from the island of Ceylon in the Indian Ocean • Pure zirconium wasn't prepared until 1914. Jons J. Berzelium

  4. Appearance A lustrous, very corrosion resistant, gray-white, strong transition metal that resembles titanium, zirconium is obtained mainly from the mineral zircon.

  5. Characteristics Zirconium is lighter than steel and its hardness is the same as copper. When it is finely divided into a powder, zirconium can spontaneously ignite in air, especially at high temperatures. The Zirconium-zinc alloy becomes magnetic at temperatures below 35K. The oxidation state of zirconium is usually +4, although +3 and +2 can also be obtained in chemical compounds. Zirconium is one of the more abundant elements, and is widely distributed in the Earth's crust. Being very reactive chemically, it is found only in the combined state. Under most conditions, it bonds with oxygen in preference to any other element, and it occurs in the Earth's crust only as the oxide, ZrO2 or as part of a complex of oxides as in zircon, elpidite, and eudialyte. Melting point: 1852°C Boiling point: 4409°C Density: 6.52g cm-3

  6. Uses Zirconium is primarily used in nuclear reactors, especially in the cladding of the fuel rods, due to its low neutron-capture cross-section and its resistance to corrosion. Zirconium is marketed as a natural gemstone used in jewellery. Zirconium oxide is processed to produce cubic zirconia. This forms a brilliant clear crystal used as a low-cost substitute for diamond. Most of the zirconium used has been as compounds for the ceramic industry: refractory, glazes, enamels, foundry mold and core washes, abrasive grits, and components of electrical ceramics, The incorporation of zirconium oxide in glass significantly increases its resistance to alkali. Another significant use has been in photo flashbulbs.

  7. Reactions • Reaction of zirconium with air • Zirconium metal is coated with an oxide layer that usually renders it inactive. However zirconium does burn in air if provoked to form thedioxide zirconium(IV) oxide, ZrO2. • Zr(s) + O2(g) → ZrO2(s) • Reaction of zirconium with water • Zirconium does not react with water under normal conditions. • Reaction of zirconium with the halogens • Zirconium does react with the halogens upon warming to form zirconium(IV) halides. So, zirconium reacts with fluorine, F2, chlorine, Cl2, bromine, I2, and iodine, I2, to form respectively zirconium(IV) bromide, ZrF4, zirconium(IV) chloride, ZrCl4, zirconium(IV) bromide, ZrBr4, and zirconium(IV) iodide, ZrI4. • Zr(s) + 2F2(g) → ZrF4(s) [white] • Zr(s) + 2Cl2(g) → ZrCl4(l) [white] • Zr(s) + 2Br2(g) → ZrBr4(s) [white] • Zr(s) + 2I2(g) → ZrI4(s) [white] • Reaction of zirconium with acids • Zirconium metal is coated with an oxide layer that usually renders it inactive. Most cold mineral acids have little effect. Zirconium does dissolve in hydrofluoric acid, HF, presumably to form fluoro complexes. • Reaction of zirconium with bases • Zirconium does not appear to react with alkalis under normal conditions, even when hot.

  8. Cubic Zirconium • Cubic Zirconia is well known as a substitute for diamond, due to its high hardness and great fire.  • CZ is a beautiful synthetic gemstone that is durable and inexpensive and now even comes in any color of the rainbow • Cubic Zirconia is a cubic form of zirconium oxide that is created in a laboratory, thus it is not a mineral.  However, it was found naturally occurring once at one site in the 1930's, but has yet to be discovered since then.     • Cubic Zirconia is an oxide of the metallic element zirconium, ZrO2.  Each zirconium atom is surrounded by eight oxygen atoms and each oxygen atom is connected to four zirconium atoms.  Mostly all CZ on the market also contains yttrium oxide that acts as a stabilizer.  In colored CZ, other oxides are added to produce the colors.  Most CZ is about 87.5% zirconium oxide and 12.5% yttrium oxide.  Though these compounds are both opaque, white ores, they melt together to form an amazing clear crystal. • To produce CZ, ZrO2 is heated to about 2300 degrees Celsius. This causes the mineral to become isometric. However, this change is not permanent, it reverses upon cooling; which is why a stabilizer must be added to prevent transformation upon cooling. If too much stabilizer is added, it results in a softer, less brilliant product. This requires such high heat that a special radio frequency "skull crucible" must be used to melt the zirconia powder. As the zirconia melts, it leaves a thin shell that remains  solid because it is cooled by the water in the copper fingers. As this occurs the zirconia and the stabilizing oxide are added to fill the skull the desired level. The contents are kept molten for several hours to ensure uniformity. To produce colors, oxides of cerium, copper, titanium, iron, nickel, and many other elements are added also.

More Related