1 / 16

Assignment Week 2

: "Prepare a project in your DAW using the project checklist from the material as your guidelines”

ttho
Télécharger la présentation

Assignment Week 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Assignment Week 2: "Prepare a project in your DAW using the project checklist from the material as your guidelines”

  2. Introduction • Hi my name is Tom and I am from Devon in the UK and I enjoy creating music but I need to sharpen up my Production techniques , which is why I am taking this course so here we go !

  3. Pre-ProductionThe Project Checklist • 1. Name your Project / Check the project location • 2. Digital Audio Preferences • 3. Recording File type • 4. Hardware Setting • 5. Buffer Size

  4. My DAW • I am using Ableton Live 8

  5. Name your Project Please note Ableton Live automatically creates a New Project (Live Set)Untitled so Name your project check location and save

  6. Check location Rename and Save

  7. Digital Audio preferences After clicking Options / Preferences / Audio , set the Sampling Rate to 48000 Khz. This is commonly used in music production and higher quality than the default 44100 Khz

  8. Digital and audio preferences After clicking Options / Preferences / Record, set the File Type to Wav and the Bit Depth to 24

  9. Hardware Settings and Daw Configurations Click back to Preferences / Audio and click Audio Device

  10. Hardware Settings and Daw Configurations In this case my Audio Device Interface is a Zoom R16 R24 there are many others like Roland , M audio etc. , so I click on that in order that my Daw and Interface are connected

  11. Hardware Settings and Daw Configurations • Next we set the Channel I/O ‘s Inputs and Outputs

  12. Hardware Settings and Daw Configurations • Input Configuration • Here we have the option to choose either mono or stereo inputs depending on what you are recording • ie Synth’s stereo • Guitar mono

  13. Hardware Settings and Daw Configurations • Output configuration • Both are chosen so you have choice

  14. Buffer size • Click on Hardware Setup • Set your Buffer Size to 128 samples as this will provide Low Latency whilst recording plug ins and increase when necessary during post production mixing to 1024 samples

  15. Reflection • Well thank you for looking at my Presentation and I hope it helps you understand Pre – Production Set up, points to remember are ; • Name your Project • Digital & Audio Preferences • Recording File Type • Hardware Setting • Buffer Size

  16. Once aGain Thank you and GOOD Recording !

More Related