1 / 13

BOSS BASE

BOSS BASE. BOSS BASE 1. BOSS BASE 2. BOSS BASE 3. BOSS BASE 4. BOSS BASE 5. BOSS BASE 6. BOSS BASE 1. 3. Sketch on the FRONT plane. 4. Extruded Boss/Base 5. Save file: “Boss Base 1” Do not print. 1. Click Front Plane 2. Click New Sketch. BOSS BASE 2.

tudor
Télécharger la présentation

BOSS BASE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BOSS BASE BOSS BASE 1 BOSS BASE 2 BOSS BASE 3 BOSS BASE 4 BOSS BASE 5 BOSS BASE 6

  2. BOSS BASE 1 3. Sketch on the FRONT plane 4. Extruded Boss/Base 5 Save file: “Boss Base 1” Do not print 1. Click Front Plane 2. Click New Sketch

  3. BOSS BASE 2 2. Extruded Boss/Base 3 • Sketch on the FRONT plane • Start on Origin (Double Red Arrow) Save file: “Boss Base 2” Do not print

  4. BOSS BASE 3 1. Sketch on the FRONT plane 3. Extruded Boss/Base 5 Save file: “Boss Base 3” Do not print 2. Trim

  5. BOSS BASE 4 1. Sketch on the FRONT plane 2. Extruded Boss/Base 4 Save file: “Boss Base 4” Do not print

  6. BOSS BASE 5 2. Trim 1. Sketch on the FRONT plane Save file: “Boss Base 5” Do not print 3. Extruded Boss/Base 4

  7. BOSS BASE 6 1. Sketch on the FRONT plane • Offset 1 • Check Bi-directional 3. Lines on ends 4. Trim 5. Extrude Boss/Base 3 Save file: “Boss Base 6” Do not print

More Related