1 / 4

SPS wirescanner measurements present status and issues - update

SPS wirescanner measurements present status and issues - update. H. Bartosik – 24.10.2012. Acknowledgements: K. Cornelis , J. Emery, A . Guerrero, G. Iadarola , V. Kain , M. Kuhn, Y. Papaphilippou , J. Ridewood. New issue with 416-V on flat top. Since 18 th October

ulysses-watkins
Télécharger la présentation

SPS wirescanner measurements present status and issues - update

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SPS wirescanner measurements present status and issues - update H. Bartosik – 24.10.2012 Acknowledgements: K. Cornelis, J. Emery, A. Guerrero, G. Iadarola, V. Kain, M. Kuhn, Y. Papaphilippou, J. Ridewood

  2. New issue with 416-V on flat top • Since 18th October • Large asymmetric tails for some shots • Profiles not reproducible • In general large emittance measured (typical >2.7μm) with same settings which usually gave 0.8μm while LHC still measures 1.7μm • Wire heating … new? (under investigation by Jonathan)

  3. Routine measurements for LHC filling • Now (TURN-ACQU) measurements are done on flat bottom • Very reproducible • Results agree well with LHC values for both planes, IN and OUT

  4. Bunch-by-Bunch measurements 50ns • Seems to work now for 50ns beam (4 batches) on flat top • Offline analysis is still required (subtraction of strong noise from baseline) • Results agree reasonably well with LHC • Filter 6 seems to work better than filter 7 (steel plate) • Gain close to 900V

More Related