SlideServe
Menu
Préférences
© SlideServe · v2026

Chamber Wire Map Analysis and Hedgehog Boards Errors - RM003 BIL6A01

vern avatar
1 diapositives · 155 Views · Aug 14, 2014

This document analyzes the wire connections in the chamber, highlighting issues identified in the Hedgehog board readings. Notable errors include missing and broken wires on both the RO and HV sides, as well as problems with gas distribution and channel noise. Specific defects are listed systematically, ranging from slipped-off wires to dead channels. This assessment is vital for troubleshooting and ensuring the reliability of the chamber's functionality. Special note is made of the uncertainty regarding missing wire positions, emphasizing the need for careful verification.

Chamber Wire Map Analysis and Hedgehog Boards Errors - RM003 BIL6A01 - slide 1
01 / 1Chamber Wire Map Analysis and Hedgehog Boards Errors - RM003 BIL6A01
1 / 17

Télécharger la présentation

Chamber Wire Map Analysis and Hedgehog Boards Errors - RM003 BIL6A01
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. SIDE A - CHAMBER WIRE MAP and HEDGEHOG BOARDS LIST ALLEGATO 2A RM003 BIL6A01 CHAMBER ID: Side A Read Out SIDE : hh……….. hh…………. hh………. hh………… hh…………. hh………….. 1 = missing wire slipped off from RO side; Z 2 = missing wire slipped off from HV side ; 3 = broken wire, parts are still in the tube, slipped off from RO side; 4 = broken wire, parts are still in the tube, slipped off from HV side; hh……….. hh…………. hh… ……. hh………… hh…………. hh………….. 5 = disconnected from gas distribution; HV SIDE : hh……….. hh…………. hh………. hh………… hh…………. hh………….. 6 = NOISY channel; 7 = DEAD channel NB: missing wireposition is not 100% sure: it could be 36 rather than 1 Z hh……….. hh…………. hh………. hh………… hh…………. hh…………..