1 / 9

Harmonic Analysis – use in calibrating models

Harmonic Analysis – use in calibrating models. Larry Smith USGS retired. Data contain variability at a number of frequencies. Walnut Grove. 15-minute Flows. Rio Vista. Julian Day. tidal field data decompose to… Individual constituents. caused by sun & moon so frequencies

vilmaris-nellis
Télécharger la présentation

Harmonic Analysis – use in calibrating models

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Harmonic Analysis –use in calibrating models Larry Smith USGS retired

  2. Data contain variability at a number of frequencies Walnut Grove 15-minute Flows Rio Vista Julian Day

  3. tidal field data decompose to… Individual constituents • caused by • sun & moon • so frequencies • are known • location on earth • influences • amplitude and • phase of • each constituent

  4. from field data A Cos(wt+P) A’ Cos(wt+P’) Model evaluation concept a Cos(wt+p) a’ Cos(wt+p’) from model calculations For a given w if we set (a=A, p=P), and run the model, does a’=A’ and p’=P’?

  5. Why does it matter?One answer comes from Eulerian flux calculations: <QC> = <Q> <C> + <Q’C’> advection + dispersion where < > is tidal mean, and Q’ = Q - <Q> etc. ~

  6. Mallard Island seaward landward

  7. Mallard Island seaward landward

  8. Net salt flux over the tidal cycle <QC> = <Q> <C> + <Q’C’> = 110 X 2.7 + (-1900) = -1600 ~ landward! A 1-hour phase shift causes the dispersion term to grow from 0 to -1900! Getting correct phase shifts is an essential part of model calibration.

  9. Particle paths are a Lagrangian calculationfor which model phases and amplitudes must be accurate….

More Related