1 / 4

11-tooth sprocket on top.

11-tooth sprocket on top. 11-tooth. 12-tooth. Here are two pictures of the 11-tooth and 12-tooth sprockets to get an idea of the size difference. 12-tooth stuck on lip. 11-tooth rotates freely (bad picture angle).

wang-barlow
Télécharger la présentation

11-tooth sprocket on top.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 11-tooth sprocket on top. 11-tooth 12-tooth Here are two pictures of the 11-tooth and 12-tooth sprockets to get an idea of the size difference.

  2. 12-tooth stuck on lip 11-tooth rotates freely (bad picture angle). Arrow shows where the chain comes closest to the transmission case. In the second picture, you can see that the chain can not rotate freely. It will only fit when the sprocket is rotated so that the chain is “flat” against the transmission case. I had to remove the “lip” between the top and bottom parts of the engine.

  3. Lip of the motor caseremoved. This is the grinding wheel that I used. As you can see, it attaches directly to a normal dill. It has worked extremely well for me in all of my applications so far. On the right, you can see that I removed the “lip” by using the edge of the grinding wheel to gently remove a little at a time. The thickness of the transmission case is plenty thick enough to withstand this little bit of metal removed. (see www.mopedjunkyard.com for a picture of motor case thickness.)

  4. Right oil spot. Left oil spot After my first round of grinding, I put the chain back on and tried to pedal the moped through one complete revolution of the chain. As you can see from this picture, the chain still touched the case. The left side of the chain touched more than the right side indicating that my grinding was not even. I evened out the surface and repeated with the revolution of the chain several times until I did not see any more oil marks on the transmission case. I made sure to remove a little at a time. You do not want to remove more than is necessary! Once I did not see anymore oil stains, I know that I did not need to grind any more. To be sure, I ground off just the slightest bit more and smoothed out the whole area for aesthetics. The 12-tooth sprocket fit like it was meant to be there! As you can see, I forgot to cover opening to the air intake (stupid me!!!). Oh well, a good carb cleaning never hurts . Also be sure to clean all surfaces of filings! You do not want to get ant of them into your engine!!!!

More Related