1 / 22

DENTURE LINING MATERIALS

By, Head of Department Dr Khawaja Rashid Hassan Rawal college of Dentistry Islamabad. DENTURE LINING MATERIALS. DENTURE LINING MATERIALS. In cases where fitting surfaces of acrylic dentures needs replacement to improve the fit of the denture. Classified into 3 main groups

willa
Télécharger la présentation

DENTURE LINING MATERIALS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. By, Head of Department Dr Khawaja Rashid Hassan Rawal college of Dentistry Islamabad DENTURE LINING MATERIALS

  2. DENTURE LINING MATERIALS • In cases where fitting surfaces of acrylic dentures needs replacement to improve the fit of the denture. • Classified into 3 main groups • Hard reline materials. • Tissue conditioners. • Soft lining materials.

  3. 1. HARD RELINE MATERIALS • Chair side relining technique is used. • Divided into 2 types. • Both types are categorized as auto polymerizable resins. • Both types polymerize easily at mouth or room temperature.

  4. 1. HARD RELINE MATERIALS Composition

  5. 1. HARD RELINE MATERIALS Composition

  6. 1. HARD RELINE MATERIALS MANIPULATION: • Grinding away some of the hard surface of acrylic base. • Powder and liquid are mixed. • Applied over the fitting surface of the acrylic base. • Seated into the patient’s mouth. • Closed mouth technique is used. • Not allowed to remain in the patient ‘s mouth throughout setting.

  7. 1. HARD RELINE MATERIALS PROPERTIES: • Direct contact with the oral tissues is a disadvantage. • Methyl methacrylate in the monomer may cause allergic reaction. • Low values of glass transition temperature (Tg) in both type 1 and type 2 materials. • May become porous due to air entrapment during mixing. • Operator has little control over the thickness of the material.

  8. 2. TISSUE CONDITIONERS • Soft denture liners. • Applied to the fitting surface of the denture. • Provides cushion to the fitting surface. • Plastic flow continues for 24-36 hours after mixing. • Several applications in denture works.

  9. 2. TISSUE CONDITIONERS • Often applied to the dentures of the patients undergone surgery. • In case of immediate dentures, • Addition of the tooth into the denture base that needs to be extracted. • Can be used as functional impression material.

  10. 2. TISSUE CONDITIONERS COMPOSITION

  11. 2. TISSUE CONDITIONERS COMPOSITION • Amount of solvent and plasticizer is very crucial. • 7.5% - 40% of liquid contains alcohol. • Powder may be pigmented or unpigmented.

  12. 2. TISSUE CONDITIONERS MANIPULATION • On mixing powder and liquid, physical process occurs. • Smaller polymeric beads get dissolved and larger beads swell up on absorbing solvent. • Final set material is gel-like. • High methacrylate, ethyl methacrylate, plasticizer and solvent gives softness. • Normally denture and patient’s soft tissues are inspected after 2-3 days.

  13. 2. TISSUE CONDITIONERS PROPERTIES: • Initially very soft and Viscoelastic. • Undergo permanent deformation under even small load. • Material do not remain permanently soft. • Time taken for the material to become hard and loose the cushioning effect varies from days to a couple of weeks. • Conditioner should be replaced after 2- 3 days till the tissue has healed properly.

  14. 3. SOFT LINING MATERIALS • Can be sub divided into a) Temporary soft lining materials. b) Permanent soft lining materials.

  15. 3. SOFT LINING MATERIALS TEMPORARY SOFT LINING MATERIALS: • Almost similar to tissue conditioners. • Supplied as powder liquid formulation. • Composition and manipulation same as tissue conditioners. • Retain their softness for longer duration.( upto a month or two) • Selection of denture cleanser is very crucial for temporary soft liners.

  16. 3. SOFT LINING MATERIALS PERMANENT SOFT LINING MATERIALS: • Commonly used in patients that cannot tolerate a hard base. • In patients with thin mandibular mucosa. • These materials should remain permanently soft for the life time of the denture. • Elasticity of these materials is very important.

  17. 3. SOFT LINING MATERIALS • AVAILABLE MATERIALS: • ACRYLIC: • Heat cure. • Cold cure. • SILICONE: • Heat cure. • Cold cure. • Condensation. • Addition. • POLYPHOSPHAZINE:

  18. 3. SOFT LINING MATERIALS • Heat cure acrylic is in powder liquid formulation. • Powder consist of poly ethyl or poly butyl methacrylate. • Liquid consists of butyl methacrylate and plasticizer. • Dough is formed which is then heat treated.

  19. 3. SOFT LINING MATERIALS • Heat cure silicone is used in the same way as heat cue acrylic. • Presented in a single paste formulation. • Paste consist of poly dimethylsiloxane polymer. • The 2 cold cure silicone elastomers are similar to the silicone elastomers used as impression materials. • Cold curing silicones are cured at room temperature.

  20. 3. SOFT LINING MATERIALS POLYPHOSPHAZINE: • Supplied in sheet form. • Polymerize by heat cure. • Curing cycle can be, • 74°C for 8 hours. OR • 74 °C for 2½ hours followed by 100 °C for 30 minutes.

  21. 3. SOFT LINING MATERIALS PROPERTIES: • All types are soft and give an adequate cushioning effect. • Cushioning effect depends upon the thickness of material. • 2-3 mm is sufficient for adequate cushioning effect. • Harden through loss of alcohol and leaching of plasticizer. • Adequate bond with the denture base. • Denture cleansers effect the soft liners.

  22. .THANKYOU QUESTIONS ???

More Related