1 / 5

Fluids Engineering Update: Filter Corrector Prototype Installation

Updates on the current status of the filter enclosure corrector prototype installation in the Maurice Ball Fluids Engineering Department. Monitoring and analyzing pressures, inspecting filter cartridge for replacements, and planning future steps with FESS. Ongoing research and collaboration for optimal filter solutions.

wolfe
Télécharger la présentation

Fluids Engineering Update: Filter Corrector Prototype Installation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Booster Enclosure Corrector Prototype InstallationFilter InstallationDissolved O2Update7/20/07Maurice BallFluids EngineeringAD/Mechanical Support

  2. Current Status • Filter Delta P Clean, at 1 GPM, 0.3 PSID • As of today, Delta P at 6-7 PSID • Max Delta P allowed is 25 PSID • Differential pressure increase/level off for now • Unusual readings, cannot draw conclusions • Have requested 1 hour access, • record pressures, • inspect replace filter cartridge • Will continue to closely monitor

  3. Full Flow Filter Update • No update • Have found several filter mfrs., obtaining quotes. Still researching • Meeting with FESS planned once filter design is set.

More Related