1 / 34

Vishwani D. Agrawal James J. Danaher Professor Department of Electrical and Computer Engineering

ELEC 5200-001/6200-001 Computer Architecture and Design Fall 2008 Symbol Representation and Floating Point Numbers (Chapters 2 and 3). Vishwani D. Agrawal James J. Danaher Professor Department of Electrical and Computer Engineering Auburn University, Auburn, AL 36849

xaviera-camacho
Télécharger la présentation

Vishwani D. Agrawal James J. Danaher Professor Department of Electrical and Computer Engineering

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ELEC 5200-001/6200-001Computer Architecture and DesignFall 2008Symbol Representation and Floating Point Numbers (Chapters 2 and 3) Vishwani D. Agrawal James J. Danaher Professor Department of Electrical and Computer Engineering Auburn University, Auburn, AL 36849 http://www.eng.auburn.edu/~vagrawal vagrawal@eng.auburn.edu ELEC 5200-001/6200-001 Lecture 11

  2. Symbol Representation • Early versions (60s and 70s) • Six-bit binary code (CDC) • EBCDIC – extended binary coded decimal interchange code (IBM) • Presently used – • ASCII – American standard code for information interchange – byte (8 bit) code specified by American National Standards Institute (ANSI) • Unicode – 16 bit code and an extended 32 bit version ELEC 5200-001/6200-001 Lecture 11

  3. ASCII • Each byte pattern represents a character (symbol) • Convenient to write in hexadecimal, e.g., • 00000000 0ten00hex null • 01000001 65ten 41hex A • 01100001 97ten 61hex a • See Figure 2.21, page 91 • C program – string – terminating with a null byte 01000101 01000011 01000101 00000000 69ten or 45hex 67ten or43hex 69ten or 45hex 00ten or 00hex E C E ELEC 5200-001/6200-001 Lecture 11

  4. MIPS: load byte, store byte • lb $t2, 0($t1) # read byte from memory and place in right-most 8 bits of $t2 • sb $t2, 0($t3) # write byte to memory from right-most 8 bits of $t2 • Examine the string copy procedure (C code) and the corresponding MIPS assembly code on pages 92-93. ELEC 5200-001/6200-001 Lecture 11

  5. Integers and Real Numbers • Integers: the universe is infinite but discrete • No fractions • No numbers between consecutive integers, e.g., 5 and 6 • A countable (finite) number of items in a finite range • Referred to as fixed-point numbers • Real numbers – the universe is infinite and continuous • Fractions represented by decimal notation • Rational numbers, e.g., 5/2 = 2.5 • Irrational numbers, e.g., 22/7 = 3.14159265 . . . • Infinite numbers exist even in the smallest range • Referred to as floating-point numbers ELEC 5200-001/6200-001 Lecture 11

  6. Wide Range of Numbers • A large number: 976,000,000,000,000 = 9.76 × 1014 • A small number: 0.0000000000000976 = 9.76 × 10 –14 ELEC 5200-001/6200-001 Lecture 11

  7. Scientific Notation • Decimal numbers • 0.513×105, 5.13×104 and 51.3×103 are written in scientific notation. • 5.13×104 is the normalized scientific notation. • Binary numbers • Base 2 • Binary point – multiplication by 2 moves the point to the right. • Normalized scientific notation, e.g., 1.0two×2 –1 ELEC 5200-001/6200-001 Lecture 11

  8. Floating Point Numbers • General format ±1.bbbbbtwo×2eeee or (-1)S × (1+F) × 2E • Where • S = sign, 0 for positive, 1 for negative • F = fraction (or mantissa) as a binary integer, 1+F is called significand • E = exponent as a binary integer, positive or negative (two’s complement) ELEC 5200-001/6200-001 Lecture 11

  9. Binary to Decimal Conversion Binary (-1)S (1.b1b2b3b4) × 2E Decimal (-1)S × (1 + b1×2-1 + b2×2-2 + b3×2-3 + b4×2-4) × 2E Example: -1.1100 × 2-2 (binary) = - (1 + 2-1 + 2-2) ×2-2 = - (1 + 0.5 + 0.25)/4 = - 1.75/4 = - 0.4375 (decimal) ELEC 5200-001/6200-001 Lecture 11

  10. MIPS Single Precision • – 128 ≤ E ≤ 127, Max |E| ~ 127, 2127 ~ 1038 • Range of magnitudes, 2×10-38 to 2×1038 • Overflow: Exponent requiring more than 8 bits. Number can be positive or negative. • Underflow: Fraction requiring more than 23 bits. Number can be positive or negative. S E: 8-bit Exponent F: 23-bit Fraction bits 23-30 bits 0-22 bit 31 ELEC 5200-001/6200-001 Lecture 11

  11. MIPS Double Precision • Max |E| ~ 1023, 21023 ~ 10308 • Range of magnitudes, 2×10-308 to 2×10308 • Overflow: Exponent requiring more than 11 bits. Number can be positive or negative. • Underflow: Fraction requiring more than 52 bits. Number can be positive or negative. S E: 11-bit Exponent F: 52-bit Fraction + bits 20-30 bits 0-19 bit 31 Continuation of 52-bit Fraction bits 0-31 ELEC 5200-001/6200-001 Lecture 11

  12. William Morton (Velvel) Kahan Architect of the IEEE floating point standard 1989 Turing Award Citation: For his fundamental contributions to numerical analysis. One of the foremost experts on floating-point computations. Kahan has dedicated himself to "making the world safe for numerical computations." b. 1933, Canada Professor of Computer Science, UC-Berkeley ELEC 5200-001/6200-001 Lecture 11

  13. Numbers in 32-bit Formats • Two’s complement integers • Floating point numbers • Ref: W. Stallings, Computer Organization and Architecture, Sixth Edition, Upper Saddle River, NJ: Prentice-Hall. Expressible numbers -231 0 231-1 Positive underflow Negative underflow Positive zero – ∞ Negative zero + ∞ Expressible positive numbers Expressible negative numbers Negative Overflow Positive Overflow -2-127 0 2-127 - (2 – 2-23)×2128 (2 – 2-23)×2128 ELEC 5200-001/6200-001 Lecture 11

  14. IEEE 754 Floating Point Standard • Biased exponent: true exponent range [-126,127] is changed to [1, 254]: • Biased exponent is an 8-bit positive binary integer. • True exponent obtained by subtracting 127ten or 01111111two • First bit of significand is always 1: ± 1.bbbb . . . b × 2E • 1 before the binary point is implicitly assumed. • Significand field represents 23 bit fraction after the binary point. • Significand range is [1, 2), to be exact [1, 2 – 2-23] ELEC 5200-001/6200-001 Lecture 11

  15. IEEE 754 FP Standard (p. 194) E: exponent, F: fraction, NaN: not a number, * see page 217 ELEC 5200-001/6200-001 Lecture 11

  16. Examples Biased exponent (0-255), bias 127 (01111111) to be subtracted 1.1010001 × 210100 = 0 10010011 10100010000000000000000 = 1.6328125 × 220 -1.1010001 × 210100 = 1 10010011 10100010000000000000000 = -1.6328125 × 220 1.1010001 × 2-10100 = 0 01101011 10100010000000000000000 = 1.6328125 × 2-20 -1.1010001 × 2-10100 = 1 01101011 10100010000000000000000 = -1.6328125 × 2-20 1.0 0.5 0.125 0.0078125 1.6328125 8-bit biased exponent 107 – 127 = – 20 23-bit Fraction (F) of significand Sign bit ELEC 5200-001/6200-001 Lecture 11

  17. Example: Conversion to Decimal normalized E F • Sign bit is 1, number is negative • Biased exponent is 27+20 = 129 • The number is bits 23-30 bits 0-22 Sign bit S 1 10000001 01000000000000000000000 (-1)S × (1 + F) × 2(exponent – bias) = (-1)1 × (1 + F) × 2(129 – 127) = - 1 × 1.25 × 22 = - 1.25 × 4 = - 5.0 ELEC 5200-001/6200-001 Lecture 11

  18. IEEE 754 Floating Point Format • Floating point numbers Positive underflow Negative underflow – ∞ + ∞ Expressible positive numbers Expressible negative numbers Negative Overflow Positive Overflow -2-126 0 2-126 - (2 – 2-23)×2127 (2 – 2-23)×2127 ELEC 5200-001/6200-001 Lecture 11

  19. Positive Zero in IEEE 754 • + 1.0 × 2-127 • Smallest positive number in single-precision IEEE 754 standard. • Interpreted as positive zero. • True exponentless than -126 is positive underflow; can be regarded as zero. 00000000000000000000000000000000 Biased exponent Fraction ELEC 5200-001/6200-001 Lecture 11

  20. Negative Zero in IEEE 754 • - 1.0 × 2-127 • Smallest negative number in single-precision IEEE 754 standard. • Interpreted as negative zero. • True exponent less than -126 is negative underflow; may be regarded as 0. 10000000000000000000000000000000 Biased exponent Fraction ELEC 5200-001/6200-001 Lecture 11

  21. Positive Infinity in IEEE 754 • + 1.0 × 2128 • Largest positive number in single-precision IEEE 754 standard. • Interpreted as + ∞ • If true exponent = 128 and fraction ≠ 0, then the number is greater than ∞. It is called “not a number” or NaN and may be interpreted as ∞. 01111111100000000000000000000000 Biased exponent Fraction ELEC 5200-001/6200-001 Lecture 11

  22. Negative Infinity in IEEE 754 • -1.0 × 2128 • Smallest negative number in single-precision IEEE 754 standard. • Interpreted as - ∞ • If true exponent = 128 and fraction ≠ 0, then the number is less than - ∞. It is called “not a number” or NaN and may be interpreted as - ∞. 11111111100000000000000000000000 Biased exponent Fraction ELEC 5200-001/6200-001 Lecture 11

  23. Addition and Subtraction 0. Zero check - Change the sign of subtrahend, i.e., convert to summation - If either operand is 0, the other is the result 1. Significand alignment: right shift significand of smaller exponent until two exponents match. 2. Addition: add significands and report exception if overflow occurs. If significand = 0, return result as 0. 3. Normalization - Shift significand bits to normalize. - report overflow or underflow if exponent goes out of range. 4. Rounding ELEC 5200-001/6200-001 Lecture 11

  24. Example (4 Significant Fraction Bits) • Subtraction: 0.5ten – 0.4375ten • Step 0: Floating point numbers to be added 1.000two× 2 –1 and –1.110two× 2 –2 • Step 1: Significand of lesser exponent is shifted right until exponents match –1.110two× 2 –2 → – 0.111two× 2 –1 • Step 2: Add significands, 1.000two + ( – 0.111two) Result is 0.001two× 2 –1 01000 +11001 00001 2’s complement addition, one bit added for sign ELEC 5200-001/6200-001 Lecture 11

  25. Example (Continued) • Step 3: Normalize, 1.000two× 2– 4 No overflow/underflow since 127 ≥ exponent ≥ –126 • Step 4: Rounding, no change since the sum fits in 4 bits. 1.000two× 2– 4 = (1+0)/16 = 0.0625ten ELEC 5200-001/6200-001 Lecture 11

  26. IEEE 754 “guard” and “round” Bits • Two extra bits, called guard and round, on the right are used for all intermediate additions. • Illustration by decimal addition: • Consider 3 significant digits • Use one guard digit and one round digit 2.34 × 102 +2.56 × 100 = 2.3400 × 102 +0.0256 × 102 With guard/round digits Without guard/round digits 2.3400 2.34 + 0.0256+ 0.02 2.3656 2.36 Result: 2.37 × 102 Result: 2.36 × 102 ELEC 5200-001/6200-001 Lecture 11

  27. FP Multiplication: Basic Idea • Separate sign • Add exponents • Multiply significands • Normalize, round, check overflow/underflow • Replace sign ELEC 5200-001/6200-001 Lecture 11

  28. FP Multiplication: Step 0 Multiply, X × Y X = 0? Y = 0? no no Steps 1 - 5 yes yes Z = 0 Return ELEC 5200-001/6200-001 Lecture 11

  29. FP Multiplication Illustration • Multiply 0.5ten and – 0.4375ten (answer = – 0.21875ten) or • Multiply 1.000two×2–1 and –1.110two×2–2 • Step 1: Add exponents –1 + (–2) = – 3 • Step 2: Multiply significands 1.000 ×1.110 0000 1000 1000 1000 1110000 Product is 1.110000 ELEC 5200-001/6200-001 Lecture 11

  30. FP Mult. Illustration (Cont.) • Step 3: • Normalization: If necessary, shift significand right and increment exponent. Normalized product is 1.110000 × 2 –3 • Check overflow/underflow: 127 ≥ exponent ≥ –126 • Step 4: Rounding: 1.110 × 2 –3 • Step 5: Sign: Operands have opposite signs, Product is –1.110 × 2 –3 (Decimal value = – (1+0.5+0.25)/8 = – 0.21875ten) ELEC 5200-001/6200-001 Lecture 11

  31. FP Division: Basic Idea • Separate sign. • Check for zeros and infinity. • Subtract exponents. • Divide significands. • Normalize and detect overflow/underflow. • Perform rounding. • Replace sign. ELEC 5200-001/6200-001 Lecture 11

  32. MIPS Floating Point Instructions • 32 floating point registers, $f0, . . . , $f31 • FP registers used in pairs for double precision; $f0 denotes double precision content of $f0,$f1 • Data transfer instructions: • lwc1 $f1, 100($s2) # $f1←Mem[$s2+100] • swc1 $f1, 100($s2) # Mem[$s2+100]←$f1 • Arithmetic instructions: (xxx=add, sub, mul, div) • xxx.s single precision • xxx.d double precision ELEC 5200-001/6200-001 Lecture 11

  33. MIPS Floating Point Instructions • Conditional branch instructions: • bc1t cc offset # if(condition cc is true) go to PC + 4 + 4×offset • bc1f cc offset # if(condition cc is false) go to PC + 4 + 4×offset • c.xx.s cc $f2, $f4 # xx=eq, lt, le, gt, ge, neq where cc = 0 or 1, is a condition flag ELEC 5200-001/6200-001 Lecture 11

  34. Recommended • Visit www.computerhistory.org to learn about the developments in computers. Many names and events in your book and those discussed in the class appear there. • When in Silicon Valley, visit the Computer History Museum (Route 101, Mountain View, CA). ELEC 5200-001/6200-001 Lecture 11

More Related