1 / 38

Chapter 14: Wireless WANs

Chapter 14: Wireless WANs. Business Data Communications, 6e. Reasons for Wireless Networks. Mobile communication is needed. Communication must take place in a terrain that makes wired communication difficult or impossible. A communication system must be deployed quickly.

zena
Télécharger la présentation

Chapter 14: Wireless WANs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 14:Wireless WANs Business Data Communications, 6e

  2. Reasons for Wireless Networks • Mobile communication is needed. • Communication must take place in a terrain that makes wired communication difficult or impossible. • A communication system must be deployed quickly. • Communication facilities must be installed at low initial cost. • The same information must be broadcast to many locations.

  3. Problems with Wireless Networks • Operates in a less controlled environment, so is more susceptible to interference, signal loss, noise, and eavesdropping. • Generally, wireless facilities have lower data rates than guided facilities. • Frequencies can be more easily reused with guided media than with wireless media.

  4. Cellular Wireless Networks • One of the most revolutionary developments in telecommunications • Supports users in locations that are not easily served by wired networks • Used for mobile telephones, personal communications systems, wireless Internet and wireless Web applications, and more

  5. Cellular Network Organization • Uses multiple low-power transmitters (≤100W) • Areas divided into cells, each one served by its own antenna. • Each cell allocated a band of frequencies, and is served by a base station • Adjacent cells are assigned different frequencies to avoid interference or crosstalk • Cells sufficiently distant from each other can use the same frequency band

  6. Cellular Geometries

  7. Frequency Reuse Patterns

  8. Frequency Reuse Patterns • Each cell has a base transceiver • Generally 10 to 50 frequencies assigned to each cell • Each cell can have K/N frequencies – where K = total number of frequencies and N = number of cell within the pattern

  9. Increasing Capacity • Adding new channels • Frequency borrowing: Frequencies are taken from adjacent cells by congested cells • Cell splitting: Cells in areas of high usage can be split into smaller cells. • Cell sectoring: Cell divided into wedge-shaped sectors. Each sector is assigned a separate subset of the cell's channels, and directional antennas at the base station are used to focus on each sector. • Microcells: Useful in city streets in congested areas, along highways, and inside large public buildings

  10. Typical Macro/Micro Cell Parameters

  11. Cellular System Overview

  12. Mobile to Base Channels • Control channels are used to exchange information having to do with setting up and maintaining calls and with establishing a relationship between a mobile unit and the nearest BS • Traffic channels carry a voice or data connection between users

  13. Steps in a Mobile Call • Mobile unit initialization • Mobile-originated call • Paging • Call accepted • Ongoing call • Handoff

  14. Other Mobile Functions • Call blocking • Call termination • Call drop • Calls to/from fixed and remote mobile subscriber

  15. Mobile Telephony • First Generation • analog voice communication using frequency modulation. • Second Generation • digital techniques and time-division multiple access (TDMA) or code-division multiple access (CDMA) • Third Generation • evolving from second-generation wireless systems • will integrate services into one set of standards.

  16. Multiple Access • Four ways to divide the spectrum among active users • frequency-division multiple access (FDMA) • time-division multiple access (TDMA) • code-division multiple access (CDMA) • space-division multiple access (SDMA)

  17. CDMA • Based on direct sequence spread spectrum (DSSS) • Provides immunity from various kinds of noise and multipath distortion. (The earliest applications of spread spectrum were military, where it was used for its immunity to jamming.) • Can be used for hiding and encrypting signals. • Several users can independently use the same (higher) bandwidth with very little interference

  18. Cellular Multiple Access Schemes

  19. Third Generation Systems • Intended to provide provide high speed wireless communications for multimedia, data, and video • Reflects trend toward universal personal telecommunications and communications access • Personal communications services (PCSs) and personal communication networks (PCNs) are objectives for 3G wireless. • Planned technology is digital using TDMA or CDMA to provide efficient spectrum use and high capacity

  20. IMT-2000 3rd Generation Capabilities • Voice quality comparable to PSTN • 144 kbps data rate for motor vehicles • 384 kbps for pedestrians • Support for 2.048 Mbps for office use • Support for packet and circuit switched data services • Adaptive Internet interface • More efficient spectrum use • Support for a wide variety of mobile equipment • Flexibility

  21. Wireless Application Protocol (WAP) • Designed to work with all wireless technologies • Programming model based on the WWW Programming Model • Wireless Markup Language, adhering to XML • Specification of a small browser suitable for a mobile, wireless terminal • A lightweight communications protocol stack • A framework for wireless telephony applications (WTAs)

  22. WAP Programming Model

  23. Wireless Markup Language • Does not assume a standard keyboard or a mouse; designed to work with telephone keypads, styluses, and other input devices common to mobile, wireless communication • Documents are subdivided into small, well-defined units of user interaction called cards; users navigate by moving back and forth between cards. • Uses a small set of markup tags appropriate to telephony-based systems

  24. Microbrowser • Based on a user interface model appropriate for mobile, wireless devices. • Traditional 12-key phone keypad is used to enter alphanumeric characters • Users navigate among the WML cards using up and down scroll keys rather than a mouse. • Navigation features familiar from the Web (e.g., Back, Home, and Bookmark) are provided as well.

  25. WAP Network Schematic

  26. Satellite Communications • Two or more stations on or near the earth communicate via one or more satellites that serve as relay stations in space • The antenna systems on or near the earth are referred to as earth stations • Transmission from an earth station to the satellite is an uplink, from the satellite to the earth station is downlink • The transponder in the satellite takes an uplink signal and converts it to a downlink signal

  27. Geostationary Earth Orbit

  28. Geostationary Satellites • Circular orbit 35,838 km above the earth’s surface • Rotates in the equatorial plane of the earth at exactly the same angular speed as the earth • Remains above the same spot on the equator as the earth rotates

  29. Advantages of Geostationary Orbits • Satellite is stationary relative to the earth, so no frequency changes due to the relative motion of the satellite and antennas on earth (Doppler effect). • Tracking of the satellite by its earth stations is simplified. • One satellite can communicate with roughly a fourth of the earth; three satellites separated by 120° cover most of the inhabited portions of the entire earth excluding only the areas near the north and south poles

  30. Problems withGeostationary Orbits • Signal can weaken after traveling that distance • Polar regions and the far northern and southern hemispheres are poorly served • Even at speed of light, the delay in sending a signal 35,838 km each way to the satellite and back is substantial

  31. LEO and MEO Orbits

  32. LEO Characteristics • Circular or slightly elliptical orbit < 2000 km • Orbit period is in the range of 1.5 to 2 hours • Diameter of coverage is about 8000 km • Round-trip signal propagation delay is < 20 ms • Maximum time that the satellite is visible from a fixed point on earth (above the radio horizon) is up to 20 minutes • System must be able to cope with large Doppler shifts, which change the frequency of the signal • Significant atmospheric drag on a LEO satellite results in gradual orbital deterioration.

  33. LEO Advantages • Reduced propagation delay • Received LEO signal is much stronger than that of GEO signals for the same transmission power • LEO coverage can be better localized so that spectrum can be better conserved. • On the other hand, to provide broad coverage over 24 hours, many satellites are needed.

  34. Types of LEOs • Little LEOs: Intended to work at communication frequencies below1 GHz using no more than 5 MHz of bandwidth and supporting data rates up to 10 kbps • Big LEOs: Work at frequencies above 1 GHz and supporting data rates up to a few megabits per second

  35. MEO Characteristics • Circular orbit at an altitude of 5000 to 12,000 km • Orbit period is about 6 hours • Diameter of coverage is 10,000 to 15,000 km • Round trip signal propagation delay < 50 ms • Maximum time that the satellite is visible from a fixed point on earth (above the radio horizon) is a few hours • Require fewer hand-offs than LEOSs

  36. Satellite Network Configurations

  37. Satellite Network Applications • Television distribution • Long-distance telephone transmission • Private business networks

  38. Typical VSAT Configuration

More Related