1 / 49

Lecture 7: Wavefront Sensing

Lecture 7: Wavefront Sensing. Claire Max Astro 289C, UCSC January 29, 2013. Outline of lecture. General discussion: Types of wavefront sensors Three types in more detail: Shack-Hartmann wavefront sensors Curvature sensing Pyramid sensing.

zoe-diaz
Télécharger la présentation

Lecture 7: Wavefront Sensing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 7:Wavefront Sensing Claire Max Astro 289C, UCSC January 29, 2013

  2. Outline of lecture • General discussion: Types of wavefront sensors • Three types in more detail: • Shack-Hartmann wavefront sensors • Curvature sensing • Pyramid sensing

  3. At longer wavelengths, one can measure phase directly • FM radios, radar, radio interferometers like the VLA, ALMA • All work on a narrow-band signal that gets mixed with a very precise “intermediate frequency” from a local oscillator • Very hard to do this at visible and near-infrared wavelengths • Could use a laser as the intermediate frequency, but would need tiny bandwidth of visible or IR light Thanks to Laird Close’s lectures for making this point

  4. At visible and near-IR wavelengths, measure phase via intensity variations Detector of Intensity Guide star Recon-structor Telescope Optics Turbulence • Difference between various wavefront sensor schemes is the way in which phase differences are turned into intensity differences • General box diagram: Wavefront sensor Computer Transforms aberrations into intensity variations

  5. How to use intensity to measure phase? • Irradiance transport equation: A is complex field amplitude, z is propagation direction. (Teague, 1982, JOSA 72, 1199) • Follow I (x,y,z) as it propagates along the z axis (paraxial ray approximation: small angle w.r.t. z) Wavefront curvature: Curvature sensors Wavefront tilt: Hartmann sensors

  6. Types of wavefront sensors • “Direct” in pupil plane:split pupil up into subapertures in some way, then use intensity in each subaperture to deduce phase of wavefront. Sub-categories: • Slope sensing: Shack-Hartmann, lateral shear interferometer, pyramid sensing • Curvature sensing • “Indirect” in focal plane:wavefront properties are deduced from whole-aperture intensity measurements made at or near the focal plane. Iterative methods –require more time. • Image sharpening, multi-dither • Phase diversity, phase retrieval, Gerchberg-Saxton (these are used, for example, in JWST)

  7. How to reconstruct wavefront from measurements of local “tilt”

  8. Shack-Hartmann wavefront sensor concept - measure subaperture tilts f Pupil plane Image plane Credit: A. Tokovinin CCD CCD

  9. Example: Hartmann test of one Keck segment (static) Reference flat wavefront Measured wavefront Gary Chanan, UCI

  10. Resulting displacement of centroids • Definition of centroid • Centroid is intensity weighted • Each arrow represents an offset proportional to its length Gary Chanan, UCI

  11. Notional Shack-Hartmann Sensor spots Credit: Boston Micromachines

  12. Reminder of some optics definitions: focal length and magnification • Focal length f of a lens or mirror • Magnification M = y’/y = -s’/s f f y y’ s s’

  13. Displacement of Hartmann Spots

  14. Quantitative description of Shack-Hartmann operation • Relation between displacement of Hartmann spots and slope of wavefront: where k = 2π / λ , Δx is the lateral displacement of a subaperture image, M is the (de)magnification of the system, f is the focal length of the lenslets in front of the Shack-Hartmann sensor

  15. Example: Keck adaptive optics system • Telescope diameter D = 10 m, M = 2800 ⇒ size of whole lenslet array = 10/2800 m = 3.57 x 10-3 m • Lenslet array is approx. 18 x 18 lenslets ⇒ each lenslet is ~ 200 microns in diameter • Sanity check: size of subaperture on telescope mirror = lenslet diameter x magnification = 200 microns x 2800 = 56 cm ~ r0 for wavelength λ between 1 and 2 microns Some examples of micro-lenslet arrays

  16. Keck AO example, continued • Now look at scale of pixels on CCD detector: • Lenslet array size (200 microns) is larger than size of the CCD detector, so must put a focal reducer lens between the lenslets and the CCD: scale factor 3.15 • Each subaperture is then mapped to a size of 200 microns ÷ 3.15 = 63 microns on the CCD detector • Choose to make this correspond to 3 CCD pixels (two to measure spot position, one for “guard pixel” to keep light from spilling over between adjacent subapertures) • So each pixel is 63/3 = 21 microns across. • Now calculate angular displacement corresponding to one pixel, using

  17. Keck AO example, concluded • Angle corresponding to one pixel = Δz/Δx where the phase difference Δϕ = k Δz. • Δz / Δx = (pixel size x 3.15) ÷ (2800 x 200 x 10) • Pixel size is 21 microns. • Δz / Δx = (21 x 3.15) ÷ (2800 x 2000) = 11.8 microradians • Now use factoid: 1 arc sec = 4.8 microradians • Δz / Δx = 2.4 arc seconds. • So when a subaperture has 2.4 arc seconds of slope across it, the corresponding spot on the CCD moves sideways by 1 pixel.

  18. How to measure distance a spot has moved on CCD? “Quad cell formula” b

  19. Disadvantage: “gain” depends on spot size b which can vary during the night b Slope = 2/b

  20. Question • What might happen if the displacement of the spot is > radius of spot? Why? ? ?

  21. Signal becomes nonlinear and saturates for large angular deviations b “Rollover” corresponds to spot being entirely outside of 2 quadrants

  22. Measurement error from Shack-Hartmann sensing • Measurement error depends on size of spot as seen in a subaperture, θb , wavelength λ , subaperture size d, and signal-to-noise ratio SNR: (Hardy equation 5.16)

  23. Order of magnitude, for r0 ~ d • If we want the wavefront error to be < λ/20, we need

  24. General expression for signal to noise ratio of a pixelated detector • S = flux of detected photoelectrons / subap npix = number of detector pixels per subaperture R = read noise in electrons per pixel • The signal to noise ratio in a subaperture for fast CCD cameras is dominated by read noise, and See McLean, “Electronic Imaging in Astronomy”, Wiley We will discuss SNR in much more detail in a later lecture

  25. Trade-off between dynamic range and sensitivity of Shack-Hartmann WFS • If spot is diffraction limited in a subaperture d, linear range of quad cell (2x2 pixels) is limited to ± λref/2d. • Can increase dynamic range by enlarging the spot (e.g. by defocusing it). • But uncertainty in calculating centroid ∝ width x Nph1/2so centroid calculation will be less accurate. • Alternative: use more than 2x2 pixels per subaperture. Decreases SNR if read noise per pixel is large (spreading given amount of light over more pixels, hence more read noise). Linear range

  26. Correlating Shack-Hartmann wavefront sensor uses images in each subaperture • Solar adaptive optics: Rimmele and Marino http://solarphysics.livingreviews.org/Articles/lrsp-2011-2/ • Cross-correlation is used to track low contrast granulation • Left: Subaperture images, Right: cross-correlation functions

  27. Better image of solar AO Shack-Hartmann sensor from Prof. Wenda Cao • Click here

  28. Curvature wavefront sensing • F. Roddier, Applied Optics, 27, 1223- 1225, 1998 More intense Less intense Normal derivative at boundary Laplacian (curvature)

  29. Wavefront sensor lenslet shapes are different for edge, middle of pupil Lenslet array • Example: This is what wavefront tilt (which produces image motion) looks like on a curvature wavefront sensor • Constant I on inside • Excess I on right edge • Deficit on left edge

  30. Simulation of curvature sensor response Wavefront: pure tilt Curvature sensor signal Credit: G. Chanan

  31. Curvature sensor signal for astigmatism Credit: G. Chanan

  32. Third order spherical aberration Credit: G. Chanan

  33. Practical implementation of curvature sensing More intense Less intense • Use oscillating membrane mirror (2 kHz!) to vibrate rapidly between I+ and I- extrafocal positions • Measure intensity in each subaperture with an “avalanche photodiode” (only need one per subaperture!) • Detects individual photons, no read noise, QE ~ 60% • Can read out very fast with no noise penalty

  34. Measurement error from curvature sensing • Error of a single set of measurements is determined by photon statistics, since detector has NO read noise! where d = subaperture diameter and Nph is no. of photoelectrons per subaperture per sample period • Error propagation when wavefront is reconstructed numerically scales poorly with no. of subapertures N: (Error)curvature∝ N, whereas (Error)Shack-Hartmann∝ log N

  35. Question • Think of as many pros and cons as you can for • Shack-Hartmann sensing • Curvature sensing

  36. Advantages and disadvantages of curvature sensing • Advantages: • Lower noise ⇒ can use fainter guide stars than S-H • Fast readout ⇒ can run AO system faster • Can adjust amplitude of membrane mirror excursion as “seeing” conditions change. Affects sensitivity. • Well matched to bimorph deformable mirror (both solve Laplace’s equation), so less computation. • Curvature systems appear to be less expensive. • Disadvantages: • Avalanche photodiodes can fail if too much light falls on them. They are bulky and expensive. Hard to use a large number of them.

  37. Review of Shack-Hartmann geometry f Pupil plane Image plane

  38. Pyramid sensing • From Brian Bauman’s PhD dissertation

  39. Pyramid for the William Herschel Telescope’s AO system

  40. Schematic of pyramid sensor • From Esposito et al.

  41. Pyramid sensor reverses order of operations in a Shack-Hartmann sensor

  42. Here’s what a pyramid-sensor meas’t looks like • Courtesy of Jess Johnson

  43. Potential advantages of pyramid wavefront sensors • Wavefront measurement error can be much lower • Shack-Hartmann: size of spot limited to λ / d, where d is size of a sub-aperture and usually d ~ r0 • Pyramid: size of spot can be as small as λ / D, where D is size of whole telescope. So spot can be D/r0 = 20 - 100 times smaller than for Shack-Hartmann • Measurement error (e.g. centroiding) is proportional to spot size/SNR. Smaller spot = lower error. • Avoids bad effects of charge diffusion in CCD detectors • Fuzzes out edges of pixels. Pyramid doesn’t mind as much as S-H.

  44. Potential pyramid sensor advantages, continued • Linear response over a larger dynamic range • Naturally filters out high spatial frequency information that you can’t correct anyway

  45. Detectors for wavefront sensing • Shack-Hartmann and pyramid: usually use CCDs (charge-coupled devices), sizes up to 128 x 128 pixels • Sensitive to visible light (out to ~ 1 micron) • Can have high quantum efficiency (up to 85%) • Practical frame rates limited to a few kHz • Read noise currently > 3 electrons per pixel per read • Recent development: infrared detectors (more noise) • Curvature: usually use avalanche photodiodes (1 pixel) • Sensitive to visible light • Slightly lower quantum efficiency than CCDs • NO NOISE • Very fast • Discrete components ⇒ maintenance headache if there are too many of them

  46. Real avalanche photodiodes (APDs) Individual APDs APD arrays

  47. Summary of main points • Wavefront sensors in common use for astronomy measure intensity variations, deduce phase. Complementary. • Shack-Hartmann • Curvature sensors • Curvature systems: cheaper, fewer degrees of freedom, scale more poorly to high no. of degrees of freedom, but can use fainter guide stars • Shack-Hartmann systems excel at very large no. of degrees of freedom • New kid on the block: pyramid sensors • Quite successful on Large Binocular Telescope AO

More Related