1 / 29

Effects of flexible motion on tsunami wall efficacy

Effects of flexible motion on tsunami wall efficacy. HARP REU 2011 Nicholas McClendon, Rice University Mentors: H.R. Riggs, Sungsu Lee, Krystian Paczkowski. Contents. (1) Flexible wall study Background Models and Methods Adaptive Mesh Refinement Results (2) Adaptive mesh study

zola
Télécharger la présentation

Effects of flexible motion on tsunami wall efficacy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Effects of flexible motion on tsunami wall efficacy HARP REU 2011 Nicholas McClendon, Rice University Mentors: H.R. Riggs, Sungsu Lee, KrystianPaczkowski

  2. Contents • (1) Flexible wall study • Background • Models and Methods • Adaptive Mesh Refinement • Results • (2) Adaptive mesh study • Decomposed domain • Whole domain • (3) Domain decomposition study • Setup • Results

  3. Flexible wall study

  4. Background: Tsunami Walls • Tsunami walls are designed to reduce the damage done by tsunami waves on coastal structures • Typical design parameters: • Material • Typically reinforced concrete, can be steel • Physical dimensions • 1 – 12 meters high • 100s of meters long • Location • Distance from sea affects forces sustained • Distance from the coastal structures it’s protecting affects damage done

  5. Flexible Wall Study Motivation Goal To develop an understanding of the effects of flexible motion on tsunami wall efficacy for possible real-world application How? Compare forces sustained by a flexible wall to the forces sustained by a rigid one • Rigid walls are subject to quick and unpredictable failure • Flexible walls absorb the force of incoming waves, increasing durability, reducing impact force, and allowing failure to be predicted more readily

  6. Models and Methods • Mathematical models: • K-Epsilon turbulence model • Newtonian transport model • Linear viscous fluid model • Numerical solvers • interFoam solver • Multiphase solver for two incompressible fluids • Numerical technique is the Volume of Fluid Method • interDyMFoam solver • interFoam + mesh modification capabilities • Flexible wall is modeled using a rigid block with a torsional spring applied at the base

  7. Adaptive Mesh Refinement • AMR refers to refinement of mesh during computation • Static AMR • Superimposes finer sub-grids on areas of interest • Dynamic AMR • Alters size, shape, orientation, and/or number of cells • Layering, remeshing, and smoothing

  8. Domain Setup • Setup: • 20m x 1.8m x 0.1m domain • 2-dimensional simulation • 2 phases • Liquid (dambreak scenario) • Gas • Boundary conditions: • Rigid wall on sides/bottom • Atmosphere on top (permits inflow/outflow) • 90,000-cell mesh • Simulation’s dimensions are reasonable to test experimentally • Test the simulation many times, varying the spring constant each time to determine how the spring constant and angle of deflection relate to the forces sustained by the wall

  9. Domain Setup

  10. Flexible Wall Simulations

  11. Results (spring constant variance)

  12. Results (spring constant variance)

  13. Results (spring constant variance)

  14. Results (spring constant variance) • Conclusion: Allowing for deflection of the wall to absorb impact force of the wave does reduce the forces sustained by approximately 1 percent per degree of deflection. • Flexible walls could provide effective impact force reduction of tsunami bores • Further study: • Walls which use the impact and uplift forces of the tsunami bore to raise into place

  15. Results (mesh convergence)

  16. Results (mesh convergence)

  17. Adaptive mesh study

  18. Adaptive Mesh Study • Goal: Observe the effects of adaptive meshing on the consistency of results of a control case • interFoam • Wall is simply part of boundary • interDyMFoam • Wall is a separate (fixed) object • Adaptive meshing used

  19. Adaptive Mesh Study interFoam, 8 processors interDyMFoam, 8 processors

  20. Adaptive Mesh Study interFoam, 8 processors Velocity magnitude (m/s) snapshot at 1.05 seconds interDyMFoam, 8 processors Velocity magnitude (m/s) snapshot at 1.05 seconds

  21. Adaptive Mesh StudyinterFoam vs. interDyMFoam, 1 processor

  22. Adaptive Mesh Study • Conclusions: • Subdomain coupling for dynamic meshing (dynamicMotionSolverFvMesh) needs to be fixed if it is to be used in the future (otherwise cannot trust results from runs done in parallel) • On a single processor, results obtained from the control case using static and dynamic meshing align very closely, so the use of dynamic meshing tools is validated for the 1-processor case

  23. Domain decomposition study

  24. Domain Decomposition Study • Setup a dambreak scenario • Domain is 40m x 3.2m x 1m • Dam is 1m x 20m • Decomposed the domain into 1, 2, 4, 8, 16, 32, 64, and 128 subdomains • Solved on HOSC using interFoam for multiphase • Measured several key values (eg. splash height, computation time) from each trial Credit also goes to Adam Koenig and Trent Thurston for gathering and analyzing data for this study.

  25. Results * Red text denotes measurements extrapolated from partially-completed simulations.

  26. Results # processors vs. clock time # processors vs. processor time

  27. Results • Conclusions: • Alternating domain decomposition can result in unpredictable variations in results • Computation clocktime reduces with increasing numbers of processors (up to 32 processors), then levels out • Processor time remains low until # of processors exceeds 32 • Too few processors doesn’t experience the benefits of parallel computing • Too many processors loses time in communication between nodes • It seems like 16 or 32 processors would be ideal, at least for this simulation, as computations can be executed most quickly without wasting resources

  28. References • http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2007/PiroozMoradnia/OpenFOAM-rapport.pdf • http://perso.crans.org/kassiotis/openfoam/movingmesh.pdf • http://openfoamwiki.net/index.php/Main_FAQ • http://www.openfoam.com/docs/user/ • http://www.tfd.chalmers.se/~hani/kurser/OS_CFD_2008/ErikEkedahl/6dofbeamer.pdf • http://web.student.chalmers.se/groups/ofw5/Advanced_Training/DynamicMesh.pdf

  29. Acknowledgment and Disclaimer I’d like to thank the following people and organizations for their help and support: Dr. Brown, Dr. H.R. Riggs, Prof. Sungsu Lee, KrystianPaczkowski, The University of Hawaii at Manoa, UHM College of Engineering, National Science Foundation, the OpenFOAM community. This material is based upon work supported by the National Science Foundation under Grant No. 0852082. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.

More Related