1 / 16

YASP 2011 for PS

YASP 2011 for PS. Marine Pace. BE/OP Shutdown Lecture 2011. Outline. Scope of the talk = TT2 and PS RING Operational status end 2010 Perspectives 2011 New corrections New functionalities Some worthwhile / advanced features. Outline. Scope of the talk = TT2 and PS RING

zora
Télécharger la présentation

YASP 2011 for PS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. YASP 2011 for PS Marine Pace. BE/OP Shutdown Lecture 2011.

  2. Outline Scope of the talk = TT2 and PS RING • Operational status end 2010 • Perspectives 2011 • New corrections • New functionalities • Some worthwhile / advanced features

  3. Outline Scope of the talk = TT2 and PS RING • Operational status end 2010 • Perspectives 2011 • New corrections • New functionalities • Worthwhile / advanced features

  4. Operational Status – End of Run 2010 • TT2 • TT2 Steering with SEM-fils / SEM-grids - ok (no ABS backup) • TT2 Bump creation - ok (Simone only, end 2010) • DHZ 117,147,167, 327, 337 • DVT 123,173, 353

  5. Operational Status – End of Run 2010 -2 • PS RING • Low Energy Closed Orbit (50DHZ, 20DVT) - ok – • One single theo optics could be enough according to Marc’s tests. TBC • High Energy Closed Orbit ejection flattop + bump (DHZ15&60 GFAS) - ok • Injection p+ Bump Closure - validated but usage remains expert • Injection coherent oscillations (p+ /ions), incl. double batch injection - principle validated but missing optics • Few time left for testing as Micado algorithm available late 2010. • Constraint highlighted: correction converges only if actual tune is smaller than theoretical tune • Additional theoretical optics are required (only 1 now) • Injection coherent oscillations for ions – tested ok but doubt on optics • Beam tune Qh 6.21, Qv 6.33 # theoretical tune Qh 6.4330, Qv 6.4518 • Theo optics to be reviewed before Ion Run in 2011

  6. YASP suitability to replace ABS • OP decision taken on 15th Dec 2010 • Based on daily experience & intensive tests performed by Marc end 2010 • Extract of report by Rende: • “We agreed that we will no longer need the old CODD and ABS in 2011. ” • “YASP in the PS has proven to work well and can be used operationally.” • “A few actions are nevertheless required to make all the corrections fully available for all beams (inj P+ , inj Ions,...)”

  7. Outlook 2011 - New Corrections - TT2 • Steering with TT2/TT10 pickups 151,251,348,356 - implemented • Controls through XenericSampler interface • Useful for steering downstream SEMs (257/8,267/8,277/8) • Additional correctors : DHZ-247,327,337, 377, DVT-353 • Correction of individual trajectory for the 5 turn extracted beam • Use of pickups 151,251,348,356 instead of SPS monitors on first injected turns • Benefit: correct trajectories prior to SPS injection • Requires a dedicated functional extension in YASP • Under discussion Simone + Jorg

  8. Outlook 2011 – New corrections - PS • PS P+ injection correction – undergoing • Reminder • Correction converges only if actual tune is smaller than theoretical tune. • The closer theo. tune and actual tune are, the more efficient the correction is. • OP decision: reduce the variety of tunes used operationally to 3 • YASP: define corresponding new optics in LSA DB (+ a bare machine optics Qh 6.25 Qv 6.29 compliant with all beams) 2010 Proposed 2011 Marc’s Courtesy

  9. New Functionalities • Simulated Trim - implemented - demo in next slide • Display of electrical values before driving HW • GUI enhancements - under discussion with Jorg • Monitors’ names on H scale of orbit plot • Standard + expert views for menus ? … • Automation of Injection p+ bump closure - under discussion with Jorg • BSW43 + 44 to correct residual oscillations of bump • Procedure is expert right now • Pre-settings before YASP: postpone the start of Radial loop & disable longitudinal blow-up • YASP specific procedure: 1- measure when bump is highest & store aqn, 2- measure when bump is down 3-correct the difference • Please discuss your requests with Marc & Rende, who compile the list of features to discuss with Jorg

  10. Outline • Operational status end 2010 • Perspectives 2011 • New corrections • New functionalities • Some worthwhile / advanced features

  11. STEERING Options • 2 options: General(all -1 cases) or Injection(turn2-turn1) • Choice of correction algorithm • SVD • Affects all correctors • Efficient correction with very small change of settings • Useful when the corrector strength is limited • Proven very efficient for LE CO corrections (cf Marc’s analysis) • MICADO • The # of correctors is adjustable • Drawback: if many correctors used, deflection may be excessive on some • Well suited for injection correction where we want to use only 1 corrector • On line change of optics • Calculate correction with another optics (+ trim HW, if wished) • Reset the theoretical tune • Display Twiss parameters demo

  12. TRIM options • Send absolute or modified correction (%, scaled) • Short cut to send last calculated trim without confirmation • Undo / Redo button : cancel / restore last trim • Revert all trims = back to initial settings • List of elements to trim • NEWView the proposed CCV before sending to HW (simulated trim) • Can be useful for PI.KFA45 to check if proposed CCV exceeds 320 KV • History of trims • Allow to view / undo or resend to HW any past trim # last trim – expert setting demo

  13. Bump Creation • Extensively used at LEIR, validated in TT2 in 2010 • Can be done offline (without acquisition) - is based on theoretical optics • Bump Toolkit • 3-corrector bumps : bump excursion [mm] can be set • 4-corrector bumps : bump excursion [mm] + angle [urad] can be set • Automatic or manual selection of bumpers • Cautious: • Due to the local optics, ‘good’ bumps cannot be build everywhere (missing correctors, strange phase advance…) => always check the bump shape before trimming HW demo

  14. Other Worthwhile Features • Response matrix computation from current optics • See effect of one corrector on monitors in DV • Data catalogs (settings + acquisitions) • Load as reference in display, toggle as golden orbit,… • Simulated acquisitions • ….

  15. Status of BE/BI outstanding issues • Work undergoing by BE/BI but will not be fixed at start-up 2011 • Bunch ID must be set to 2 in YASP GUI to observe 1st bunch on h=16 injected beams • Reason: the injection trigger PIX.INJ-TMS has a resolution of h=8, so its smallest increment jumps two RF buckets at a time. The current setting is in fact just one bucket too early • PU 35,37,40 acquisitions are wrong of 1st turn of 2nd batch • These PU acquire empty buckets on the preceding turn • Problem: PI2X.INJ-TMS is used to position the start of the revolution period at 2nd injection • Temp fix in YASP in 2010 : PU 35,37,40 are set disabled .

  16. Time for questions

More Related