1 / 12

Hydraulic Symbols HYS102 Part D Pressure Control Valves

Advance Search Forward & Reverse. Beginner’s Series. {sounds of throat clearing}. Hydraulic Symbols HYS102 Part D Pressure Control Valves. Please advance each slide at the tone. 1. Each member of the pressure control family starts with a square.

addison-hyde
Télécharger la présentation

Hydraulic Symbols HYS102 Part D Pressure Control Valves

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Advance Search Forward & Reverse Beginner’s Series {sounds of throat clearing} Hydraulic Symbols HYS102 Part D Pressure Control Valves Please advance each slide at the tone.

  2. 1. Each member of the pressure control family starts with a square 4. Add a dashed line from the inlet port to the top of the valve 2. Yes, good job. The 2 little lines are the ports 5. Add a spring, and while you’re on a roll, put an arrow thru the spring at a 450 angle 3. Add an arrow to indicate the flow path thru the valve

  3. 1. Excellent! We have a relief valve 5. Until pilot pressure in the dashed line is high enough to overcome the spring force 2. The flow path arrow is not in alignment with the ports • Which means the valve is normally closed 6. Yon 450 arrow means that the spring, and thereby, the pressure setting of the valve, is adjustable 4. The spring holds the valve closed

  4. What have we learned so far? 1. A relief is one member of the pressure control family 2. The valve is held in its normally closed state by the spring until the pilot pressure exceeds the spring setting 3. The arrow thru the spring shows that the spring is adjustable

  5. 1. A sequence valve symbol is the same as a relief with the addition of an external drain 2. Typically, a sequence valve is used to cause one cylinder or motor to start moving before another cylinder or motor Sequence Valve

  6. 1. the counterbalance valve symbol is the same as a relief 2. Typically, a counterbalance valve is used to hold a load from falling Counterbalance Valve

  7. What have we learned so far? 4. A Sequence valve has an external drain 5. A counterbalance valve symbol is the same as a relief valve

  8. External pilot Internal pilot 1. A brake valve symbol is the same as a relief and includes an external pilot line in addition to the internal pilot line 2. Typically, a brake valve is used to brake the speed of a freewheeling hydraulic motor Brake Valve

  9. External pilot 1. An unloading valve symbol is the same as a relief, but it has external pilot 2. Typically, an unloading valve is used to unload a pump at low pressure Unloading Valve

  10. 5. This valve, as well as most of the others, comes with an optional check valve Normally open 1. The pressure reducing valve is the only normally open pressure control 2. Typically, it’s used to reduce the pressure in a portion of the system 4. You know an external drain when you see one 3. It has internal pilot, but this silly thing has it coming from the outlet port Pressure Reducing Valve

  11. What else have we learned? 6. A brake valve has both internal and external pilot lines 7. An unloading valve is like a relief except it has an external pilot line • A pressure reducing valve is wierd • the only Normally open pressure control • Pilot pressure sensed from the outlet port

  12. Thanks for hanging with me Wanna hook all of these valves up? There’s hands-on training in Birmingham Close this window and click on the final module, then you’re done

More Related