1 / 5

COMPASS BEARINGS

COMPASS BEARINGS. North 0 o. ANGLE. A compass bearing is a direction. We measure bearings using degrees (360 o ) or mils (6400). Bearings are always measured clockwise from North (zero line). The magnetic declination for your area must be set

afox
Télécharger la présentation

COMPASS BEARINGS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. COMPASS BEARINGS North 0o ANGLE • A compass bearing is a direction. • We measure bearings using degrees (360o) or mils (6400). Bearings are always measured clockwise from North (zero line). • The magnetic declination for your area must be set on your compass before taking a bearing! BEARING Level Three 419.06 OHP # 1

  2. STEPS IN TAKING A COMPASS BEARING 1. Open the cover of the compass to about 50-70o. 2. Place the safety cord around your neck. Extend your arm and hold the compass flat at eye level. 3. Face the object. Use the sighting line in your compass to ensure that you keep all the parts in a straight line. Level Three 419.06 OHP # 2

  3. STEPS IN TAKING A COMPASS BEARING (cont’d) 4. Turn the compass dial until the red end of the magnetic needle is inside the orienting arrow. Remember: Do not look at the compass dial - look at its reflection in the mirror! 5. Open the cover and look at the number next to the luminous index pointer. 6. This number is your compass bearing!! You are ready to start hiking!! Level Three 419.06 OHP # 3

  4. FOLLOWING A GIVEN BEARING 1. Turn the compass dial until the bearing appears opposite the luminous index pointer. 2. Place the safety cord around your neck and raise the compass to eye level. 3. Turn your body until the red end of the magnetic needle is lined up with the orienting arrow. 4. Look through the sight and select an object in your path. 5. Close the compass and hike to the object. When you reach it, choose a new landmark and repeat the steps. Level Three 419.06 OHP # 4

  5. BACKBEARINGS Halifax Fredericton • Backbearings are the opposite reading of a compass bearing. • To take a backbearing: 1. Read the number opposite the luminous point. 2. Turn the dial so that this number now appears at the luminous index pointer. 3. This new bearing will take you back to where you started from! St. John’s Level Three 419.06 OHP # 5

More Related