1 / 43

Are there analog challenges in your next design that you haven’t discovered yet ?

Are there analog challenges in your next design that you haven’t discovered yet ?. You ?. Use Anadigm Programmable Analog Signal Processing Technology to:. Simplify Your Analog Design Cycles Adapt Your Design Using Software Tools Instead of a Soldering Iron

akira
Télécharger la présentation

Are there analog challenges in your next design that you haven’t discovered yet ?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Are there analog challenges in your next design that you haven’t discovered yet ? You ?

  2. Use Anadigm Programmable Analog Signal Processing Technology to: • Simplify Your Analog Design Cycles • Adapt Your Design Using Software Tools Instead of a Soldering Iron • Add New Features and Capabilities to Your Product After the Circuit Board Is Finished

  3. Anadigm’s Programmable Analog Signal Processing Technology Delivers Accuracy and Stability: • Achieve 0.1% functional accuracy • Chip to chip accuracy ± 0.1% • Drift free performance immune to process variation, operating temperature and aging

  4. The CAD Tools

  5. Overview AnadigmDesigner2 • Easy-to-Use • Standard Windows based icon drag-and-drop user interface • Built-in SPICE based discrete-time circuit simulator • Built-in signal generator and oscilloscope • Available FREE from Anadigm website (www.anadigm.com) • Supports the selection, configuration and interconnect of Configurable Analog Modules (CAM)

  6. Configurable Analog Modules (CAM) • A CAM is an analog signal processing function abstracted in software accessed by an icon • A large library of standard function CAMs is included • A circuit is implemented simply by selecting, configuring, and wiring CAMs in the design space • Each CAM has a user interface to configure options and limits • Each CAM has an accurate functional model for use with the internal SPICE simulator

  7. Typical CAM Dialog Window to Select Values Clock and name Radio buttons Parameter entry area

  8. Partial Library of Available CAMs

  9. High PassFilter Half-WaveRectifier Low PassFilter InvertingGain Comparatorw/ Ref Connect Multiple CAMs to Build Complex Functions

  10. Simulator

  11. AnadigmFilter Tool

  12. AnadigmFilter - It builds the circuit for you.

  13. AnadigmFilter Tool

  14. Typical Applications • Complex analog filtering circuits • Guaranteed and repeatable filter implementation • Implemented filter is drift-free and immune toaging or component variations • Make tunable (adaptable) filters within minutes • Sensor signal conditioning • Gain, offset correction, linearization, etc. • Stable and adaptable sensor stimulus • Correct / adjust for aging, drift,manufacturing variability, etc. • Improve accuracy, performance and control by providing real time adjustments to range of operation • Closed loop control systems • Proportional-Integral-Derivative (PID) controllersimplemented within minutes • Low latency control loop

  15. Summary • Simplify Your Analog Design • Reduce design time • Save engineering costs • Gain the Flexibility to Adapt Your Design • Easily address unknown/unforeseen design issues • Quickly modify circuits when specifications change • Board spins are replaced with software changes • This flexibility can extend all the way to your customer’s site • One PCB can serve many products

  16. Everything shown in this presentation runs on the Servenger Programmable Analog Module (PAM) • Anadigm on a circuit board with clock, power supplies, connectors and input & output buffers. • Serial port connection to AnadigmDesigner2 • Accepts differential or single-ended inputs with selectable input impedances • Input and output signals are referenced to GND. • Stores downloads from AD2 in the on-board EEPROM for the “run from EEPROM” mode (don’t need to own a separate PROM burner)

  17. Exercise: Build a Circuit that Filters and Rectifies a Signal • Circuit will take a square wave input and output a bandpass filtered version of the signal and then a rectified version of the filtered signal • This is a basic circuit that will show: • The frequency components of the square wave • The average DC value of the extracted component

  18. Step 1: Set up a Biquadratic Band Pass Filter Open AnadigmDesigner2. Click on the green box to pop up the CAM selection window

  19. Step 2: Place Biquadratic Filter in Chip Work Space Choose (double Click) from the list of CAMs a “FilterBiquad” Filter. (this is a two pole pole Filter) and set the dialog parameters as shown on the next page

  20. Step 3: Set Biquadratic CAM parameters Step 1: set the Clock to 2000 kHz by moving the spinners Step 2: Select Band pass filter by clicking on the band pass radio button Step 3: Set Corner Frequency to 5 KHz, gain to 1.0 and Q to 15 Step 4: Click on OK to accept parameters

  21. Step 4: Place a “RectifierFilter” CAM in the Work Space Choose (double Click) from the list of CAMs a “RectifierFilter” CAM. This is a rectifier with a combined single pole low pass filter. The combination of the filter and rectifier uses the same number of op amps as a rectifier alone eliminating the need for a separate filter. Please set parameters as shown on the next page

  22. Step 5: Set parameters for the “RectifierFilter” Step 4: Click on OK to accept parameters Step 1: set the Clock to 2000 kHz by moving the spinners Step 3: Set Corner frequency to 100 KHz and gain to 1. Why 100 KHz? It lets through almost all the energy from the square wave, but blocks higher harmonics that may alias back Step 2: Choose a non inverting Full wave rectifier. Note the other choices for future reference

  23. Step 6: Add an External Signal Generator Add a signal Generator by clicking on the sine wave on the tool bar and then place the signal generator here Next…. Double click on the signal generator to pop up the configuration window on the next page

  24. Step 7: Configure signal generator And set Parameters as shown to create a 5Khz square wave Next….wire the circuit up

  25. Step 8: Wire up the circuit • Wire it up! • Just drag the mouse over to the contact or wire that you want to wire up • 2) A wire tool graphic will appear and the contact will high light • 3) Next, click the left mouse button • Next….. Place oscilloscope probes

  26. Step 9: Place Oscilloscope Probes • Place Probes • Depress the probe tool icon on the tool bar (to the right of the sine wave) • Drag it near a contact and when the contact high lights, depress the left mouse button • Maintain the probe colors as shown in the picture so you can follow along • Next….. • Configure the Simulator

  27. Step 10: Configure the Circuit Simulator • Configure the simulator • Click on the ‘Simulate’ tab on the tool bar and then choose the selection ‘Setup Simulation’ • Configure the options as shown • Next….. • Run the simulator

  28. Step 11: Run the Simulator Depress the “Sim” icon to run. Set time parameters as shown (in red). • Extracted Fundamental of Square Wave • Rectified Fundamental • Input Square Wave 5Khz

  29. Continuing the Exercises: • Change to a bandstop filter to block rather than pass the fundamental frequency • Simulate to see what a square wave looks like with its first harmonic blocked! • Obtain average DC value of the rectified signal

  30. Exercise: Set Biquadratic CAM parameters Step 1: set the Clock to 2000 kHz by moving the spinners (it should already be like this) Step 2: Select Band stop filter by clicking on the band pass radio button. This will block rather than pass the fundamental 5Khz signal Step 3: Set Corner Frequency to 5 KHz, DC gain to 1.0 and Q to 15 and HF Gain to 1 Step 4: Click on OK to accept parameters

  31. Results: Run the Simulator Again • Square Wave with Fundamental Blocked • Rectified Version • Input Square Wave 5Khz

  32. Exercise: Build a filter with AnadigmFilter Open AnadigmDesigner with a blank workspace and select Anadigm filter icon Next…

  33. Step 1: Design Filter Properties in AnadigmFilter

  34. Step 2: New filter appears in design work space And here it is: AnadigmFilter built a 5 pole Butterworth high pass filter.

  35. Start working with Anadigm Programmable Analog • Purchase Servenger Programmable Analog Module from www.servenger.com • Read the Quick Start Guide: • Go to www.anadigm.com to download and install the latest version of AnadigmDesigner2 • Do the simple exercise included to create first Anadigm design – a 440Hz tone generator.

  36. Available is the newly published Prentice-Hall text book which includes the Programmable Analog Module: Electronic Devices Eighth Edition by Thomas Floyd Text is for freshman to junior level programs. The goal is to rapidly teach electronic concepts in a curriculum using computer based design tools including National Instruments Multisim and the Anadigm based Programmable Analog Module. Order from Pearson / Prentice-Hall www.prenhall.com or your usual book distributor. ISBN: 0-13242973-X

  37. The accompanying Student Lab Manual is Laboratory Exercises for Electronic Devices by David M. Buchla Steven Wetterling The Student Lab Manual develops the concepts and knowledge presented in the Electronic Devices text book using the Anadigm based Programmable Analog Manual. Order from Pearson / Prentice-Hall www.prenhall.com or your usual book distributor. ISBN: 0-13-242971-3

  38. www.servenger.com

  39. www.anadigm.com

More Related