1 / 35

Reflection and Refraction

Reflection and Refraction. Chapter 29. Reflection. When a wave reaches a boundary between two media, some or all of the wave bounces back into the first medium. Reflection.

Télécharger la présentation

Reflection and Refraction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Reflection and Refraction Chapter 29

  2. Reflection • When a wave reaches a boundary between two media, some or all of the wave bounces back into the first medium.

  3. Reflection The angle of incidence is equal to the angle of reflection" is one way of stating the law of reflection for light in a plane mirror.

  4. Reflection Law of Reflection: the angle of incidence equals the angle of reflection

  5. Reflection Consider the diagram at the right. Which one of the angles (A, B, C, or D) is the angle of incidence? ______ Which one of the angles is the angle of reflection? ______

  6. Reflection A ray of light is incident towards a plane mirror at an angle of 30-degrees with the mirror surface. What will be the angle of reflection?

  7. Reflection Perhaps you have observed the image of the sun in the windows of distant buildings near the time that the sun is rising or setting. However, the image of the sun is not seen in the windows of distant building during midday. Use the diagram below to explain, drawing appropriate light rays on the diagram.

  8. Reflection A ray of light is approaching a set of three mirrors as shown in the diagram. The light ray is approaching the first mirror at an angle of 45-degrees with the mirror surface. Trace the path of the light ray as it bounces off the mirror. Continue tracing the ray until it finally exits from the mirror system. How many times will the ray reflect before it finally exits?

  9. Reflecting Mirrors • In order to see the image of an object in a mirror, you must sight at the image; when you sight at the image, light will come to your eye along that line of sight. • The image location is thus located at that position where observers are sighting when viewing the image of an object

  10. Reflecting Mirrors • It is the location behind the mirror where all the light appears to diverge from

  11. Reflecting Image Location

  12. Image Formation in Plane Mirrors

  13. Image Formation in Plane Mirrors But what if the man stood a different distance from the mirror? Wouldn't that cause the man to need a different amount of mirror to view his image? Maybe less mirror would be required in such an instance?

  14. Image Formation in Plane Mirrors

  15. Diffuse Reflection Rough surface, diffuse reflection

  16. Diffuse Reflection

  17. Diffuse Reflection Rough surfaces consist of a large number of different specularly-reflecting planes. Visible light reflects diffusely from paper.

  18. Diffuse Reflection Rough surfaces seem smoothfor very long-wavelengthelectromagnetic waves.This parabolic dish reflectslong wavelength radio wavesto the detector, but reflectsmost of the shorter wavelengthradiation away from thedetector.

  19. Reflection of Sound Reflected Wave Incident Wave

  20. Reflection of Sound spherical wavefronts reflected as if there were an "image" of the sound source at the same distance on the other side of the wall.

  21. Reflection from Concave Surface Any concave surface will tend to focus the sound waves which reflect from it

  22. Refraction Refraction is the bending of light as it passes between materials of different optical density. Index of Refraction of a material is the ratio of the speed of light in vacuum to the speed of light in that material: n = c/v where v is the speed of light in the material.

  23. Refraction n = c/v • the more dense the material, the slower the speed of light in that material. Thus n > 1 for all materials, and increases with increasing density. • n = 1 in vacuum.

  24. Refraction • The frequency of light does not change when it passes from one medium to another. According to the formula v =  f , the wavelength must change. The index of refraction can therefore be written in terms of wavelengths as: • n= • where 0 is the wavelength of the light in the vacuum and  is the wavelength of the light in the medium.

  25. Refraction Light in air incident on glass surface where it is partly reflected at the interface and partly transmitted into the glass. The direction of the transmitted ray is changed at the air/glass surface. The angle of refraction r is less than the angle of incidence i.

  26. Refraction The velocity of visible light in different media. The value of 100% refers to the velocity of light in vacuum.

  27. Refraction Light waves of wavelength  incident on glass change direction and wavelength when transmitted into the glass.

  28. Refraction of Light The greater the change in velocity and wavelength, the greater the change in direction

  29. Values of Refractive Index Medium Refractive Index 1.0003 Water 1.33 Linseed Oil 1.48 Co Green 2.00 Diamond 2.42 Ti White 2.5 Refractive Index For light, the index of refraction n equals the ratio of the velocities of light in vacuum (c) to that in the medium (v), that is n = c/v. Air

  30. Light in Glass Light incident on a glass plate. The reflected part of the ray is shown along with the light path for the refracted component.

  31. Total Internal Reflection If light is inside a material such as glass with a larger refractive index n2 than that n1 of the material outside such as air, there is an angle, the critical angle of incidence, beyond which the light is reflected back into the material and does not escape sin ic = n1 / n2

  32. For light exiting glass, n2 = 1.5, the relation becomes sin ic = 1.0 / 1.5 Critical Angle the value of the critical angle of incidence is 41°

  33. Total Internal Reflection The internal reflectance at an air/glass interface for light rays from a point source in glass. Light rays incident at angles to normal at greater than the critical angle (here, 41° for glass to air) do not leave the material and are reflected at the glass/air interface

  34. Refraction of Sound

  35. Refraction of Sound

More Related