1 / 12

Phase-Noise EQ2440 26/3-2014

Phase-Noise EQ2440 26/3-2014. Per Zetterberg. I&Q Modulator. x. x. +. I&Q Demodulator. x. x. BP. LP. LP. With phase-noise. With noise or interference. Can leak into desired signal, when LO1 is non-ideal. SDR: Flexibility in digital => lots of E(f). Time-Domain. Phase-noise.

beck
Télécharger la présentation

Phase-Noise EQ2440 26/3-2014

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Phase-NoiseEQ2440 26/3-2014 Per Zetterberg

  2. I&Q Modulator x x +

  3. I&Q Demodulator x x BP LP LP

  4. With phase-noise With noise or interference Can leak into desired signal, when LO1 is non-ideal. SDR: Flexibility in digital => lots of E(f)

  5. Time-Domain Phase-noise Modulated signal (partially known, e.g. training) Phase-noise spectrum: or Don’t be to sure of which is refered to....

  6. PLL Phase Detector Loop-filter VCO - Ref Out Noises: VCO: 1,1/f,1/f^2,1/f^3 1/N : 1, 1/f Phase detector: 1, 1/f Ref input:

  7. Model PLL Dynamics And Phase-Noise Performance Phase Detector Loop-filter VCO

  8. Phase-Noise Spectrum ADF4360 (RFX1800)

  9. OFDM Subcarrier information symbols e.g. QPSK={-1,+1,-j,+1} Cyclic prefix typically 10% Symbol time without CP. Phase-noise cause inter-carrier interference.

  10. add_phase_noise.m • Matlab function from MATLAB central. • Spectrum defined in a PSD diagram (dBc) is used as input. • The assumption is used. => Spectrum of is equal to spectrum of . • The real-valued noise is generated in the frequency-domain using FFT (Gaussian noise. Independent from bin to bin). • My question: How accurate is this model ? • My observation: Very neat function.

  11. A Novel Model for Simulation of RF Oscillator Phase Noise • Paper by Siamak Yousefi potential PhD student at KTH. • Studies problem scetched below. • Some exact mathematical treatment and some approxmiations. • Models noise close to carrier better than Leeson. • Output of integrator unstable (my observation). Thermal and flicker noise Integrator exp(j*a)

  12. For project course. • Use matlab function add_phase_noise.m. • Provide three basic settings. Good, fair and bad. • Present PLL with slides. Refer to ”Phase Locked Loops for High-Frequency Receivers and Transmitters Part 1-3” and ”Model PLL Dynamics and Phase-Noise Performance”.

More Related