1 / 2

Lava Lamp Instructions

Lava Lamp Instructions. BERROCA http://www.youtube.com/watch?v=7vKP7E4Bxe8 Fill bottle ½ full of water Fill bottle almost to the top with oil (leave ~5 cm of space at the top) Add 2 drops of food coloring and glitter Put Berroca tablet in and watch the cool lava lamp effect.

bette
Télécharger la présentation

Lava Lamp Instructions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lava Lamp Instructions BERROCA http://www.youtube.com/watch?v=7vKP7E4Bxe8 • Fill bottle ½ full of water • Fill bottle almost to the top with oil (leave ~5 cm of space at the top) • Add 2 drops of food coloring and glitter • Put Berroca tablet in and watch the cool lava lamp effect. 1) Explain what is happening in terms of convection SALT http://kids.nationalgeographic.com/kids/activities/funscience/lavalamp/ • Fill bottle ½ full of water. • Add 2 drops of food coloring and glitter • Fill bottle almost to the top with oil and let the mixture separate. • Pour salt into the jar until you see the cool lava lamp effect. 1) Explain what is happening in terms of convection.

  2. HEAThttp://oozinggoo.com/ll-form2.html 1. Pour 100 ml 95% isopropyl alcohol in bottle (250 ml flask). 2. Add 10 ml of water. Stir gently. 3. Pour 20 ml of mineral oil. (you can add some more as you go along) You will notice that the oil will be at the bottom. 4. Then slowly, add 70 ml of 70% isopropyl alcohol until the solution reaches up to 200 ml. Stir gently. • Tip: pour the rubbing alcohol down the side of the flask for the alcohol to mix with less stirring. 5. After stirring, if the mineral oil bubbles sink immediately to the bottom then add 10 ml of water then stir gently again. Continue adding 5 ml of water then stir until you see the bubbles stay in the middle or do not sink immediately after you stir. When its ready, add some more 70% alcohol. Stir. 6. Put on heat source and watch the cool lava lamp effect. 7. Explain what is happening in terms of convection.

More Related