1 / 8

11-29-10 Drill

11-29-10 Drill. A single iron rod, radius R, has a critical buckling load B and a tensile fracture force T max = T If you bond together seven such rods in the following two configurations, what will be their new failure loads? Explain your answers. a) b). Additional Problems.

britanni-singleton
Télécharger la présentation

11-29-10 Drill

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 11-29-10 Drill • A single iron rod, radius R, has a critical buckling load B and a tensile fracture force Tmax= T • If you bond together seven such rods in the following two configurations, what will be their new failure loads? Explain your answers. a) b)

  2. Additional Problems • ASTM A36 steel has an ultimate tensile strength of 400 MPa and a Young’s Modulus of 200 GPa. If you create 1 m long rods of the following configurations, what will be their critical buckling and tensile fracture loads? Ro = 2 cm Ri = 1 cm R = 1 cm R = 2 cm A B C R = 1 cm D

  3. How would you solve for these two configurations?

  4. With a 5% uncertainty in each measured value, what is the uncertainty that propagates through your calculations to your final answers?

  5. Now at a cost of $1 per pound and a density of 7.8 g/cm3, what is the difference in costs among the four configurations? Ro = 10 cm Ri = 7.5 cm R = 1 cm R = 2 cm R = 1 cm

  6. Materials Test Wednesday • Anything covered in lecture and lab • A couple error/uncertainty problems • Multiple choice, matching, short answer

  7. Materials Review Objectives Review major concepts from materials lecture and materials lab Understand the implications of material properties and tension/compression equations on design

  8. Review PowerPoint “U2-2 Materials 2”

More Related