1 / 3

Column & Collar MCP Support Concept

Column & Collar MCP Support Concept. Jason McPhate Weekly Mechanical Telecon 25 June 2010. Column & Collar Assembly. Exploded View. Columns attached to anode, run full height of tube Bottom collar slips around column, 6mm tall MCP’s have matched holes to slip over column for alignment

cael
Télécharger la présentation

Column & Collar MCP Support Concept

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Column & Collar MCP Support Concept Jason McPhate Weekly Mechanical Telecon 25 June 2010

  2. Column & Collar Assembly J. McPhate – Weekly Mechanical Telecon

  3. Exploded View • Columns attached to anode, run full height of tube • Bottom collar slips around column, 6mm tall • MCP’s have matched holes to slip over column for alignment • Middle collar between MCP’s, maintains MCP gap of 0.5mm • Top MCP held down by metal retainer clips on each column • Window support by outside wall and columns (collars have no bearing) • Collars do all the anode to MCP and MCP to MCP gap definition J. McPhate – Weekly Mechanical Telecon

More Related