SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

Thermally Induced Stress in a Glass-Silicon Bonded MEMS Micro-Structure

ciel avatar
ciel
20 diapositives · 452 Views · Oct 12, 2014

Thermally Induced Stress in a Glass-Silicon Bonded MEMS Micro-Structure A Finite Element Analysis ( FEA ) using flexPDE. Craig E. Nelson - Consultant Engineer. The purpose of this numerical experiment is to learn about the field distribution of stress and strain in a MEMS microstructure.

#thermally induced stress in a glass-silicon bonded mems micro-structure #thermally induced stress in a glass-silicon bonded mems micro-structure ppt #powerpoint #presentation
Thermally Induced Stress in a Glass-Silicon Bonded MEMS Micro-Structure - slide 1
01 / 20Thermally Induced Stress in a Glass-Silicon Bonded MEMS Micro-Structure
1 / 17

Télécharger la présentation

Thermally Induced Stress in a Glass-Silicon Bonded MEMS Micro-Structure
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. Thermally Induced Stress in a Glass-Silicon Bonded MEMS Micro-Structure A Finite Element Analysis ( FEA ) using flexPDE Craig E. Nelson - Consultant Engineer

  2. The purpose of this numerical experiment is to learn about the field distribution of stress and strain in a MEMS microstructure. This knowledge helps the engineer to better understand the stress on a bond line as will occur when anodic bonding of glass and silicon is attempted. In this model, a high bonding temperature is impressed on all parts which subsequently cool to room temperature. As the material cools, it shrinks differing amounts in different materials and in different places within a given material, thus “freezing in” stress that, unless relieved, will exist for the life of the bonded part. Depending on circumstances, the bond line may be sufficiently stressed to fail during the cooling process.

  3. Silicon Wafer Anodic Bond Line Glass Silicon Wafer Anodic Bond Line Model Geometry

  4. Shrinkage Shrinkage Strained Structure – Shrinkage is Greatly Magnified

  5. Temperature Gradient During Cooling

  6. Strain Distribution Field – Horizontal Direction

  7. Strain Distribution Field – Vertical Direction

  8. Strain Distribution Field – Vector Plot

  9. Stress Distribution Field – Horizontal Direction

  10. Stress Distribution Field – Vertical Direction

  11. Shear Stress Distribution Field

  12. Stress Distribution Field – Tension

  13. Principal Stress Distribution Field – Horizontal Component

  14. Principal Stress Distribution Field – Vertical Component

  15. Angle of Principal Stress Distribution Field

  16. Von Mises Stress Distribution Field

  17. Strain Distribution Field – Horizontal Component

  18. Stress Distribution Field – Horizontal Component

  19. Stress Distribution Field – Vertical Component

  20. Summary and Conclusions A finite element model has been developed that allows insight into the field distribution of stress and strain in an anodic bonded glass-silicon MEMS microstructure. This knowledge helps the engineer to better understand the stress and strain on the glass-silicon bond line and other parts of the solution domain. The model could be further developed in many further ways.