Download
permanent lifting magnets have built in safety n.
Skip this Video
Loading SlideShow in 5 Seconds..
Permanent Lifting Magnets have Built-In Safety Feature PowerPoint Presentation
Download Presentation
Permanent Lifting Magnets have Built-In Safety Feature

Permanent Lifting Magnets have Built-In Safety Feature

1 Vues Download Presentation
Télécharger la présentation

Permanent Lifting Magnets have Built-In Safety Feature

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Permanent Lifting Magnets have Built-In Safety Feature Failsafe operation is that the unique advantage of permanent lifting magnets. They’re resistant to power failures. Permanent lifting magnets from Magnet Manufacturer provide a fast and efficient thanks to lifting, lower and vertically or horizontally transport sheet, flat and round steel, like plates, forgings, and die castings. Since they are doing not require electricity to work, they need an inbuilt failsafe feature that eliminates the work safety hazards caused by power failures. Permanent Lifting Magnets Overview Permanent magnet lifters are made up of two sorts of magnets: rare-earth element and Ceramic. Lifting magnets have a really strong but low magnetic flux and are capable of safely lifting loads in more than 2,000 pounds, which may be diminished under certain load conditions. These magnets are sensitive to air gaps between the magnet and therefore the load. This suggests that when the air gap increases, the magnetic holding force is going to be reduced thanks to a lower density of magnetic flux between the magnet and therefore the load. Air gaps are created in several ways. a couple of examples are paint, dust, and heavy mill scale. Badly machined surfaces also create air gaps. Full lifting capacity can only be obtained when the magnet makes full contact with the fabric being lifted. Operation Permanent lifting magnets don't require electric power to work. They’re operated manually with a lever mounted on the lifter. However, they can't be operated remotely. Permanent lifting magnets are easy to work.

  2. With the lever within the off position, the load should be placed on the lifter, eliminating as many air gaps as possible. When the magnetizing lever is placed within the "on" position, the load is going to be magnetized and prepared for lifting. Attempt an attempted lift to make sure the load is often lifted safely. When the lift is completed, and therefore the load has been placed completely and safely during a resting position, move the lever to the "off" position to release the load from the lifter. For long and heavy loads, multiple magnets are often utilized in tandem to increase the lifting capacity. You can buy Magnetic Chuck of China online. Power Failures Resistance Failsafe operation is that the unique advantage of permanent lifting magnets. They’re resistant to power failures. The electromagnetic lifter doesn't have this feature because electromagnets require continuous electric power to work. Electromagnetic lifters would require the mixing of an uninterruptible power supply to supply a failsafe operation. This is able to, of course, increase begin, maintenance, and operating costs. On the opposite hand, the electromagnetic lifter is that the most cost-effective "magnets per pound of lift" since they will extend the lifting capacity beyond what permanent magnetic lifters can handle. The electro-permanent magnetic lifter also possesses the failsafe feature but this sort of lifter requires electric power to show the lifter on or off. The facility is often supplied by a battery. The quantity of power consumption to show the electro-permanent lifter on or off is nominal. However, the battery will get to be charged periodically. Address: NO.1975 JIANNAN ROAD, NINGBO Country: CHINA Zip: 315040 Contact email id: info@climemagnet.com Phone No. : +86-574-27903196 Fax: +86-27-63499779 Website : http://www.climemagnet.com/