SlideServe
Télécharger Obtenir Pro
Menu
Accueil Pro
Préférences
ApparenceLight Aide et commentaires
© SlideServe · v2026

8086 Microprocessor Architecture and Segmentation Overview

collene avatar
collene
34 diapositives · 652 Views · Jan 06, 2020

Learn about the 8086 microprocessor architecture, segment registers, BIU and EU registers, internal and external registers, physical memory addressing, instruction execution phases, and operating modes. Visit our site for educational resources.

8086 Microprocessor Architecture and Segmentation Overview - slide 1
01 / 348086 Microprocessor Architecture and Segmentation Overview
1 / 17

Télécharger la présentation

8086 Microprocessor Architecture and Segmentation Overview
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation

  1. 8086 MICROPROCESSOR ARCHITECTURE & SEGMENTATION Visit for more Learning Resources

  2. Multiplexed address & data pin Multiplexed address & status pins Select Minimum/ maximum mode Multplexed address and data bus Interrupt Pins

  3. A19/S6, A18/S5, A17/S4, A16/S3

  4. BHE/S7

  5. QS1, QS0

  6. S0, S1, S2

  7. Flags Carry flag Overflow Parity flag Direction Auxiliary flag Interrupt enable Zero Trap Sign 6 are status flags 3 are control flag

  8. 8086 Programmer’s Model ES Extra Segment BIU registers (20 bit adder) CS Code Segment SS Stack Segment DS Data Segment IP Instruction Pointer EU registers AX AH AL Accumulator BX BH BL Base Register CX CH CL Count Register DH DL DX Data Register SP Stack Pointer BP Base Pointer Source Index Register SI DI Destination Index Register FLAGS

  9. 8086/88 internal registers 16 bits (2 bytes each) AX, BX, CX and DX are two bytes wide and each byte can be accessed separately These registers are used as memory pointers. Flags will be discussed later Segment registers are used as base address for a segment in the 1 M byte of memory

  10. Offset Value (16 bits) 0 0 0 0 Segment Register (16 bits) Adder Physical Address (20 Bits) Memory Address Generation Intel • The BIU has a dedicated adder for determining physical memory addresses

  11. Byte end of code segment 3FFFF Next instruction byte to be fetch Physical address 30123 0123 Start of code segment 30000 CS: 30000 + IP: 0123 = Physical address 30123 Physical Address generation for code segment

  12. Byte Top of Stack end of code segment 6FFFF SP = FFE0 6FFE0 H Physical address 0123 Start of stack segment 60000 H SS: 60000 + SP: FFE0 = Physical address 6FFE0 Physical Address generation for stack segment

  13. Fig a) Non-pipelined execution of 3 instructions F D E F D E F D E I1 I1 I1 I2 I2 I2 I3 I3 I3 Clock cycle 1 2 3 4 5 6 7 8 9 Fig b) Pipelined execution of 3 instructions F I1 I2 I3 I4 I5 F - Fetch I4 I1 I2 I3 D - Decode D E I1 I2 I3 E - Execute Clock cycle 1 2 3 4 5

  14. Operating modes of 8086 Microprocessor • 8086 can be operated in two modes- Minimum Mode Maximum Mode • In minimum mode all control signals are generated by 8086 itself, so it is used in single processor system • In miximum mode all control signals are generated by bus controller 8288 and not by the processor 8086, so it is used in multiprocessor system. • The pin 33 MN/MX is used to set minimum mode or maximum mode of 8086 and also the function of pin no 24 to 31 will change as per the selected mode.

  15. 8284 Pin Diagram:

  16. 8284 Block Diagram: CSYNC F / C x1 Clock OSC Clock Logic x2 EF1 PCLK RDY1 AEN1 Ready Logic READY RDY2 AEN2 Reset Logic RESET RES

  17. 8284 Connected to 8086 Mp X1 Ready X2 8086 Microprocessor CLK AEN1 AEN2 8284 F/C Reset RDY1 RDY2 RES R + 5 V RESET KEY C

  18. Vcc S0 S2 MCE/PDEN DEN CEN INTA IORC AIOWC IOWC IOB CLK S1 DT/R ALE AEN MRDC AMWC MWTC GND 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 8 2 8 8 8288 BUS CONTROLLER • the 8288 is a 20-pin chip specially designed to provide all the control signals when the 8088/86 is in maximum mode. The input and output signals are described below.

  19. MRDC MWTC AMWC IORC AIOWC INTA S0 S1 S2 Bus Command Logic AEN CEN CLK IOB DT/ R DEN ALE MCE / PDEN Control Signals Logic

  20. Input signals

  21. Pin Diagram of 74LS245:

  22. Pin Diagram of 74LS245:

  23. Function of 74LS245:

  24. 8086 System Minimum mode (74LS373) (74LS245)

  25. Processor Timing Diagram of 8086 (Minimum Mode)for Memory or I/O Read T1 T2 T3 T4 CLOCK __ DT/R ALE AD15 - AD0 A15 - A0 D0 – D15 (from memory) A19/S6 - A16/S3 A19 - A16 S6 - S3 __ IO/M if I/O ACCESS this is HIGH, if MEMORY ACCESS this is LOW ____ RD ______ DEN

  26. Processor Timing Diagram of 8086 (Minimum Mode)for Memory or I/O Write T1 T2 T3 T4 CLOCK __ DT/R ALE AD15 - AD0 A15 - A0 D15 - D0 (from memory) A19/S6 - A16/S3 A19 - A16 S6 - S3 __ IO/M if I/O ACCESS this is HIGH, if MEMORY ACCESS this is LOW ____ WR ______ DEN

  27. 8086 System Maximum Mode

  28. Processor Timing Diagram of 8086(Maximum Mode)for Memory or I/O Read T1 T2 T3 T4 CLOCK __ DT/R ALE D0-D15 AD15- AD0 A15 - A0 S2-S0 S2-S0 Active S2-S0 Inacive A19/S6 - A16/S3 A19 - A16 S6 - S3 MDRC/IORC ______ DEN

  29. Processor Timing Diagram of 8086(Maximum Mode)for Memory or I/O Write T1 T2 T3 T4 CLOCK __ DT/R ALE D0-D15 AD15- AD0 A15 - A0 S2-S0 S2-S0 Active S2-S0 Inacive A19/S6 - A16/S3 A19 - A16 S6 - S3 MWTC &IOWC AMWC/AIOWC ______ DEN For more detail contact us