1 / 25

-The pre-insulated air ducting panels

001-i. CHAPTER . -The pre-insulated air ducting panels. -Bases of the system: Advantages. -Tools and consumables. -Cutting the panels: Strips. -Cross joints fits and longitudinal joints . The PIRALU ducts.

cordell
Télécharger la présentation

-The pre-insulated air ducting panels

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 001-i CHAPTER -The pre-insulated air ducting panels -Bases of the system: Advantages -Tools and consumables -Cutting the panels: Strips -Cross joints fits and longitudinal joints

  2. The PIRALU ducts With these Piralu®pre-insulated panels an extremely high quality ducting can be achieved, as a direct result of the combination of the aluminium and of excellent insulation (PIR). This combination also provides and excellent internal air quality (IAQ), a fine external finish, longlife material, lightweight and easily transported, manipulated and constructed.

  3. The PIRALU panels: • Panel of aluminium embossed pre-insulated with PIR foam • Size: 3.000 x 1.200mm • Thickness: 20 or 30mm • Thermal insulation: K=0,020 • Reaction fire: CLASS 0 (BS 476)

  4. Base of the PIRALU system 1º • Size of the panels: 3.000x1.200x20mm

  5. Base of the PIRALU system 2º • Cut of the longitudinal strips at 45º

  6. Base of the PIRALU system 3º • Ducts assembled with four separate faces.

  7. Base of the PIRALU system Aluminium tape Glue Silicon • Lengthwise glued, • Aluminium tape in trhe external longitudinals angles, • Silicon in the longitudinal internal angles.

  8. mm. 150 200 250 300 400 500 600 800 1000 1200 International Standards Standard Competitive • Cost control • Ex stock • Available with distributor Readiness • With the norms • With the environment Respectful Easy to build Construction • Assembling • Own workers • DID Advantages of the system PIRALU Practical Economical

  9. Tools: model “BASE” Module 1th. cut 45º Right 45º Left 45º Right Module 1th. cut

  10. Tools: model “QUATRO” 45º Right

  11. Tools: model “QUATRO” 45º Left

  12. Tools: model “QUATRO” 90º Straight

  13. Tools: model “QUATRO” Male & Female

  14. Cut of the PIRALU panels

  15. Cut of the PIRALU panels

  16. Cut of the PIRALU panels Module 1th. cut Module 1th. cut

  17. 45ºLeft 45ºRight Types of Strips: Normal 1 • To build ducts with section =<1.200mm

  18. 45ºRight 45º Right Types of Strips: Super 2 • To build ducts with section >1.200mm

  19. 300 mm Plenums 45º Right 90º Straight Types of strips: Special 3 • To build elbows, wye and special shares. Fixed meassure: 300mm

  20. Cross joint fit: male & female Glue Air Flow Glue Figure 1

  21. Cross joint fit: male & female Aluminium tape Air Flow Aluminium tape Figure 2

  22. Cross joint fit: male & female Female

  23. Cross joint fit: male & female Male

  24. Longitudinal joints Glue Aluminium tape Figure 1

  25. Longitudinal joints Silicon Aluminium tape Figure 2

More Related