1 / 23

Fluidization Characteristics of Rice Husk in a Fluidized Bed

Fluidization Characteristics of Rice Husk in a Fluidized Bed. Abdussalam Abuadala Ph.D Candidate Supervisor: Prof. Prabir Basu Mechanical Engineering Department Dalhousie University Halifax, Nova Scotia B3J 2X4 Canada. Outline. What is the fluidization?

dane-dodson
Télécharger la présentation

Fluidization Characteristics of Rice Husk in a Fluidized Bed

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Fluidization Characteristics of Rice Husk in a Fluidized Bed Abdussalam AbuadalaPh.D Candidate Supervisor: Prof. Prabir Basu Mechanical Engineering Department Dalhousie University Halifax, Nova Scotia B3J 2X4 Canada Mechanical Engineering Department, Seminar April 2008

  2. Outline • What is the fluidization? • Why do need to fluidize rice husk? • Experimental setup • Results • Conclusion Mechanical Engineering Department, Seminar April 2008

  3. This work is a part of my PhD research Mechanical Engineering Department, Seminar April 2008

  4. What is the fluidization? It is a technique used to make solid behaves like fluid. This technique will be used in biomass gasification. Mechanical Engineering Department, Seminar April 2008

  5. Why do we need to fluidize rice husk as received? Conserve energy that need in pretreatment operation to improve its flow properties. Rice husk has 20% ash, silica consists 95% and its properties could be affected when mixed with other bed material. 3. Reduce operating cost of plant. Mechanical Engineering Department, Seminar April 2008

  6. Presently we do not know if husk can be fluidized without mixing it with sand. So, we explore fluidization potential of husk: in bubbling fluidized bed (BFB) in circulating fluidized bed (CFB) Mechanical Engineering Department, Seminar April 2008

  7. Experimentalsetup Mechanical Engineering Department, Seminar April 2008

  8. Bed materialRice husk from: Rice Hull Specialty Products Incorporation, Stuttgart, Arkansas, USA. The properties were measured in the lab. Mechanical Engineering Department, Seminar April 2008

  9. Bubbling Fluidized Bed This experiment used: Sandwich distributor Three different bed cross sections Different bed depths Mechanical Engineering Department, Seminar April 2008

  10. Results Mechanical Engineering Department, Seminar April 2008

  11. Pressure drop across the bed against superficial gas velocity W = 6 kg; A = 0.15 m²; Hst = 0. 37m; Wg/(pmA)= 1.12 Mechanical Engineering Department, Seminar April 2008

  12. Ratio of pressure due to weight and that from experiment

  13. BFB; A= 0.5 m2; Hst= 0.54 m u = 0.5 m/s, Wg/(PA)=2.6 u = 0.8 m/s, Wg/(PA)=1.53 Mechanical Engineering Department, Seminar April 2008

  14. BFB A =0.5 m2; u =1.75 m/s; Wg/(AP)=1.3 Front view Top view Mechanical Engineering Department, Seminar April 2008

  15. Observations in BFB Ratio of weight and pressure drop is always greater than 1 though in BFB it is equal to 1. It suggests the weight of husk particles was never supported by fluid friction. Yet appearance of fluidized bed suggests creation of constantly shifting mini channels. It could also suggest formation of husk agglomerates whose size might be change. 15 15 Mechanical Engineering Department, Seminar April 2008

  16. Fast Fluidized Bed Objective:To explore if husk could be in circulating fluidization unaided Experiments:Measured density profile at constant loop seal aeration to study effects of: Superficial gas velocity Bed inventories Mechanical Engineering Department, Seminar April 2008

  17. Suspension density profile for 30 kg bed inventory for three superficial velocities • Density is small above 1.0 m and below 4.5 m. • Exponential decay trend similar to fast bed of granular solids. • Only a minor effect of velocity noted. • Loop aeration was unchanged. Mechanical Engineering Department, Seminar April 2008

  18. Effect of superficial velocity on suspension density by using 45.5 Kg as bed inventory Mechanical Engineering Department, Seminar April 2008

  19. Effect of superficial velocity on suspension density by using 68 Kg as bed inventory Mechanical Engineering Department, Seminar April 2008

  20. Effect of superficial velocity on suspension density by using 91 kg as bed inventory Mechanical Engineering Department, Seminar April 2008

  21. Effect of bed inventory on suspension density (at U =2.6 m/s and across height 0.17 – 1.10 m) 21 21 Mechanical Engineering Department, Seminar April 2008

  22. CONCLUSIONS It is possible to achieve fast fluidization with rice husk and without mixing it with other solids. Pressure drop across ‘fluidized’ husk was below that need for complete support. It suggests formation of micro-channeling or husk agglomerates. The weight over pressure drop ratio increased with bed depth (0.5m2 & 0.15m2 beds) suggesting channeling at higher Hst/A ratio. 22 22 Mechanical Engineering Department, Seminar April 2008

  23. Thank You Mechanical Engineering Department, Seminar April 2008

More Related