1 / 5

david key california describes the types and uses of transfo

The industry of Steel has complete reliance in having more and more effective as well as efficient energy resources. These days, when these energy resources are gradually depleting, there is a mere need to have more and more energy saving devices in the steel industry.

digitalsteel
Télécharger la présentation

david key california describes the types and uses of transfo

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. David key California David key of fresno, California president of virtual engineering seen to the right, is directing workers to the details of a custom waterfall being built within the fresno acura dealership. The design was first generated in a 3D virtual tour so that the project could be experienced before it was built.

  2. David Key California • The industry of Steel has complete reliance in having more and more effective as well as efficient energy resources. These days, when these energy resources are gradually depleting, there is a mere need to have more and more energy saving devices in the steel industry. • There are various energy consuming processes that are required in the steel industry. These include finishing, casting, reheating, rolling, iron making, EAF steel making, boilers, sintering, coke making and cogeneration. Because of the introduction of modern and new production methodology, there is a need of having customized transformers to be installed in the production units of steel industries.

  3. David Key California • Steel companies, like Digital Steel Internationalare more into buying the expensive but efficient transformers. Though the initial cost of these transformers is high, but there is no doubt in that they help in increasing the savings in long run. Nowadays, one can get all kinds of customized transformers which are specially designed to be used in the steel industry. The best part about these transformers is that they are manufactured by some of the reputed manufacturers. Thus, you do not have to worry about the quality of these customized transformers.

  4. David Key California • The essential work of the transform is adjusting the voltage by taking the help from mutual electromagnetic induction. In this, the electrical current runs in the primary circuit or coil which is then used in creating the magnetic field. Some Changes arises in the current which leads to alterations in magnetic field. After this, transformers have to alter the voltage of secondary coil or circuit. In other words, one can say that transformers acts as energy converters which set the higher power to lower voltage as well as vice and versa.

  5. David Key California • David Key California pointed, The main function of changes in the primary coil set the voltage of current in the secondary coil automatically that is either stepped-down or stepped-up. Taking all these points into consideration, the modern transformers can provide you with numerous uses.Thanks for your invaluable time to read my presentation.

More Related