1 / 52

STAR Light PDR – 3 October 2001

SYSTEM REQUIREMENTS Roger De Roo 734-647-8779, deroo@umich.edu. STAR Light PDR – 3 October 2001. Outline: Science requirements & instrument concept STAR and DSDR technologies, instrument configuration Platform requirements (power/weight/balance) Flowdown requirements

espen
Télécharger la présentation

STAR Light PDR – 3 October 2001

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SYSTEM REQUIREMENTS Roger De Roo 734-647-8779, deroo@umich.edu STAR Light PDR – 3 October 2001

  2. Outline: • Science requirements & instrument concept • STAR and DSDR technologies, instrument configuration • Platform requirements (power/weight/balance) • Flowdown requirements • Noise Budget, sampling, interference rejection • Calibration Outline

  3. Science Requirements Soil Moisture Monitoring (L-band radiometer w/ 4K accuracy) Land Surface Process Model Development (long term operation, plot scale ) Polar Operations (airborne access only) STAR-Light Design Goals Measurement Objectives

  4. Platform Requirements STAR-Light Design Goals Aircraft Sensor Concept STAR-Light Control Module STAR-Light Sensor Module For weight stability, plane must be a tail-dragger rather than equipt with tricycle gear

  5. Science Requirements Soil Moisture Monitoring: Radio astronomy band: 1400 – 1427 MHz Noise Equivalent Brightness Uncertainty (NEDT) < 0.5 K Land Surface Process Model Development in Polar Regions: Swath out to +/- 35 deg from sensor normal Daily operations for 3 hours near dawn Synthetic beamwidth from 15 deg to 22 deg Ambient thermal environment –30C to +40C (243 K to 313 K) STAR-Light Design Goals Derivative Measurement Objectives

  6. Platform Requirements Max altitude: about 3000m (higher requires oxygen) Min altitude: about 300m (lower sacrifices safety) Surface to altitude temperature difference: -30C typical Surface to altitude pressure change: 1000mb to 700mb typical STAR-Light Design Goals Aerial Environment

  7. Cold Plate Analog Digital Antenna Radome Sensor Concept: Configuration Mechanical arrangement on aircraft belly Cold Plate Receiver Cross section Receiverassembly is a field-replaceable unit

  8. Sensor Concept STAR-Light Aircraft Sensor Concept Use Synthetic Thinned Array Radiometry to -provide imaging capability -achieve multiple angle of incidence electronically -keep the sensor robust to partial failures Use Direct Sampling Digital Radiometry to -move complexity of STAR from analog to digital domain -keep the sensor head compact -reduce component count requiring thermal control

  9. o 90 Vi Vq Sensor Concept: STAR STAR-Light Concept: STAR Technology Different antenna baselines sample different spatial Fourier components of the scene f Baseline d Vi + j Vq = Tb(f) F1(f) F2(f) exp(j 2 p sin f d / l ) df *

  10. A/D DSP Vi Vq A/D Sensor Concept: DSDR Direct Sampling Digital Receiver Technology • Transfer • Noise bandwidth definition • I/Q detection (Hilbert transform) • Complex correlation • from analog to digital domain

  11. 2l/2 l/2 3l/2 l/2 Sensor Concept STAR concept Use a standard antenna array with missing elements: 7l/2 To simulate an array of larger dimensions, by using each Element in turn as the phase center of the array: + = 14l/2

  12. Sensor Concept STAR-Light Antenna Configuration: 1-D vs 2-D STAR 1-D: requires long antenna elements to achieve narrow beam -single angle of incidence (pushbroom operation) -alias free spacing is 0.500 l -demonstrated (ESTAR) 2-D: requires electrically small antenna elements -multiple angles of incidence (snapshot imaging) -many configurations; 3-arm appears optimal -alias free spacing is 0.577 l -proposed (SMOS), but not yet demonstrated

  13. Sensor Concept STAR Issues Huge sidelobes: STAR requires an aperture taper which increases synthesized beamwidth by a factor of 2 (canceling the aperture doubling) ………but the advantages of thinning remain Optimal taper is Blackmann [Camps etal ’98] Increased noise: Noise in STAR image = Real Aperture Area . Noise in real aperture pixel Actual Aperture in STAR ………but longer dwell time for STAR to reduce noise equals time required to scan the real array or real aperture [LeVine ’90, Ruf ’88]

  14. STAR-Light Antenna Design: Inter-element spacing Brightness Scene STAR image A trade-off between *reduction of field of view due to aliasing (ie. Grating lobes) against *loss of beam sharpness due to reduced array size Ideal spacing is about d=0.75 l to achieve 35deg FOV d=0.800 l d=0.577 l Flowdown Rqmt: Antenna Spacing

  15. Sensor Concept STAR Image Generation: Gain Correction {V(GT)}=F(GT) T=F-1(V(GT))/G T=F-1(V(GT))/F-1(V(G)) G is gain pattern of commercial patch antenna; Correction is not as pronounced for G=cosnq FOV=35o

  16. Flowdown Rqmt: Antenna Elements Pattern knowledge requirement Errors induced by imperfect knowledge of antenna gain patterns: Image DC offset = +30mK/K/deg2 + 12mK/K/%2 Image rms error = +/- 0.4 mK/K/deg +/- 0.35 mK/K/% Constant brightness temperature scene inverted by system with gain pattern uncertainty of 1dB and 10o Goal is 0.5dB and 5o

  17. Sensor Concept STAR Image Generation: Impulse Response cos2q 0o 30o 60o 89o patch antenna Array spacing driven by horizon alias generation d=0.68l = 14.4 cm

  18. A/D DSP Low Precision and Control: 2.0C High Precision and Control: 0.011C keep in operating range High Accuracy Monitoring: 0.1C; Moderate Control Sensor Concept: Thermal Heat Dissipation and Thermal Control 150 mW steady; 2.9 W intermittent 54 W typical; 70 W maximum 27 W steady

  19. Sensor Concept: Geometry Mechanical arrangement Preferred Orientation for Cold Plate: easy side access for cooling fluid conduits Required Orientation for Linear Pol Antennas: Parallel or anti-parallel AD Analog side needs high precision control, moderate heat removal Digital side needs low precision control, large heat removal AD Problem: orientation of cold plate to antenna

  20. A D A D A D A D Sensor Concept: Receiver Module Solutions to Cold Plate / Antenna Orientation Conflict Solution 0: disconnect Antenna from Receiver to allow Receiver orientation to Cold Plate Very difficult field cal Solution 2: multiple fixed Antenna & Receiver modules Expensive Cold Plate A D Antenna Solution 1: flexible connection between Antenna & Receiver to allow Receiver orientation to Cold Plate Questionable quality Solution 3: Circular Polarized Antennas Tricky Cold Plate A D Antenna

  21. Flowdown Rqmt: Antenna Elements Single Feed Circular Polarization Patch Notches create two modes w/ different resonances Proper feed allows these two modes to be fed w/ equal amplitude and 90o phase 1.4% circular polarization bandwidth at AR=1dB while 11% VSWR bandwidth (VSWR=2) Q=8.6; Eff=90% Cupped design to reduce mutual coupling Parameters shown from design paper; must be modeled w/ EM analysis SW 14cm 7.75cm e=2.2, t=4.6mm

  22. Platform Capabilities STAR-Light Design Goals Aircraft Capabilities Aircraft acquisition costs and aircraft integration are not part of STAR-Light project

  23. Platform Requirements: Weight Aviat Husky Weight Limitations Max. Gross Weight: 2000 lbs (normal category)

  24. Platform Requirements: Weight Useful Load Weight Breakdown * Present estimate + 10 lbs Weight Margin: 4 lbs (from previous viewgraph)

  25. Platform Requirements: Balance Weight and Balance w/ full fuel tanks w/ empty fuel tanks

  26. Platform Requirements: Power Constant Power Requirements

  27. Platform Requirements Intermittent Power Requirements Aircraft systems Taxi/Landing Lights (14.2A @ 12V) = 170.4 W Radio Transmissions (6A @ 12 V) = 72 W STAR-Light Components: RF switches: 2.9W at 0.3% duty cycle = 10mW Cooling System on climb to altitude

  28. 50 50 40 40 30 30 20 20 10 10 0 0 -10 -10 -20 -20 -30 -30 Sensor Concept: Thermal Increase in altitude to 3000 m Cooling Control Setpoints Ground Ambient Airborne Ambient

  29. Flowdown Requirements Integration Time for STAR-Light: 2x Husky no-flap stall speed

  30. Flowdown Requirements Integration Time for STAR-Light: Slower speed

  31. Flowdown Rqmt: Noise Figure For any taper [Camps, ’98]: DT dW=constant NEDT(uniform) = dW(Blackman)/dW(uniform) * NEDT(Blackman) = (15deg)^2 / (10deg)^2 * 0.5 K = 1.12K For uniform taper [LeVine, ’90], NEDT = TsysAsyn = Trec + 300K 73 sqrt( B t ) n Ael sqrt( 20e6 . 1.5 ) 10 For NEDT < 1 K, Tsys< 750 K or Trec<450 K (NF < 4.1 dB)

  32. Flowdown Rqmt: Noise Figure Antenna Low Noise Amp Miteq Cal injection Teledyne switch Interference Reject Filter IMC IL=0.60dB NF=0.80dB IL=0.45dB IL=0.25dB Interconnect losses < 0.5dB Downstream components: add 0.1dB System Noise Figure = 2.7 dB (Trec=250K)

  33. Flowdown Rqmt: Gain Signal amplitude at ADC must be > 4 levels (2 bits) for bias levels to not matter [Fischman, ’01] At Tsys=250K, k Tsys B = -101.6 dBm; LSB=15.63mV for typical ADC (SPT7610) => Padc=-26.6 dBm Overall gain must be > 75 dB For amplifier w/ G=26dB, 3 amplification stages minimum (to allow for losses in receiver, use 4 stages)

  34. Flowdown Rqmt: Gain Fluctuations Temperature fluctuations => Gain fluctuations => system noise dG/dT = -0.02 dB/K per gain stage dG/dT = -0.08 dB/K for system: requires 2mK rms to keep gain fluctuation component < fundamental NEDT Thermopad: temperature compensating attenuator Thermopads come in loss coefficient increments of 0.01 dB/K Goal: Use Thermopads to get system to +/- 0.015 dB/K; thermal control to 11mK rms

  35. Flowdown Rqmt: ADC levels Need a minimum of 4 levels for darkest target [Fischman ’01] Is a 3-bit Analog to Digital Converter (ADC) enough? Tsys(max) / Tsys(min) < (8 levels)^2 / (4 levels)^2 = 4 where Tsys=Tb+Trec If we wish to look at the sky, Tb(min)=~0K; On Earth, Tb(max)=~300K Then, Trec>100K or we need more bits Therefore, 3 bit ADC is enough

  36. Flowdown Rqmt: Pre-Sampling Filter IMC Ceramic Filter The Fringe Wash Function measures the differences between bandpass filters, and reduction in measurable visibility due to receiver differences • A pre-sampling filter is used to • define sampled bandwidth: • interference rejection • out-of-band noise rejection FWF=0.996

  37. Flowdown Rqmt: Pre-Sampling Filter IMC Ceramic Filter The half-bit level for a 3-bit ADC is –24dB Variations over temperature define the bandwidth extent for sampling

  38. Flowdown Rqmt: ADC sampling Sampling Rate considerations [Feixure etal ’98] For a noise bandwidth (approx -3dB BW) of 1403 – 1423 MHz, the sampled bandwidth (approx –24dB BW) is 1390 – 1435 MHz For I/Q demodulation, 2fH/m < fs < 2fL/(m-1), where m=1,2,…mmax and mmax=floor[fH/(fH-fL)] 92.58 MHz < fs < 92.66 MHz or 95.67 MHz < fs < 95.86 MHz or 98.97 MHz < fs < 99.29 MHz or 102.5 MHz < fs < 102.96 MHz… fs=102.8 MHz

  39. Flowdown Rqmt: ADC sampling Sampling skew: If |tskew| < 6.7 ns, reduction in visibility envelope is less than 3% ENV=sinc(Btskew) Vi=ENV*cos(2pf0tskew) Vq=ENV*sin(2pf0tskew) Fischman was unable to verify this form for the envelope Verification is a primary objective of the two channel system

  40. Flowdown Rqmt: ADC sampling Sampling jittersd produces a Coherence Loss (CL) in a visibility value [Fischman ’01]: CL = 10 log( 1 + ( 2 p f0sd)^2) for sd = 20 ps, CL = 0.14 dB, or, in other words, 20 ps jitter reduces a visibility value by 3% over a zero jitter visibility

  41. Flowdown Rqmt: Noise Budget x (73/10)x(0.45)= x 3.25

  42. Flowdown Rqmt: Interference • Keep cultural sources of RFI out of receiver chain to the extent that • Amplifiers do not saturate • Intermodulation products do not get generated in Radio Astronomy band • RFI does not alias into ADC sampling window • Some worst-case sources of interference: • 1. Air Traffic Control Radar Beacon System (ATCRBS) Transponder • *Responds to 1030 MHz radar pings, reporting aircraft altitude to ATC • *Transmits from the STAR-Light aircraft at 1090 MHz w/ peak power • between 70 and 500 W (+48 dBm to +57 dBm) • Air Route Surveillance Radar (ARSR) • * Transmits from the ground from 1250 to 1350 MHz w/ peak power up • to 5 MW (+97 dBm) • * Some similar military systems have high resolution modes which use • up to 1375 MHz, 1380 MHz, or 1400 MHz

  43. 140 dB- 156 dB 31 dB 51 dB 76 dB 101dB Flowdown Rqmt: Interference Keeping the ATCRBS Transponder from saturating STAR-Light amplifiers +53 dBm Moving the transponder antenna to the top of the tail gives a distance of 4 m to STAR-Light Coupling < –42 dB at 4 m Typical model (Garmin GTX 320A) transmits 200W (+53dBm) at 1090 MHz 4 m Cumulative Rejection Needed: P1dB=+8dBm P1dB=+14dBm

  44. Flowdown Rqmt: Interference Keeping the ARSR 1250 - 1350 MHz intermodulation products out of the 1400 – 1427 MHz Radio Astronomy band Rqmt: Keep PIM < -140dBm At 50 km, ARSR-3 power at antenna terminals is Pr =–5dBm (assuming gain is down by 8dB, and polarization match = 50%) Miteq IIP3 = -9dBm Requires filtering of F= 37dB at 1350 MHz P2=Pr-F P1=Pr-2F PIM=2P2+P1-2IIP3 f (MHz) 1277+/-5 f1 1345+/-5 f2 1413+/-10 2f2-f1 We will get hit w/ intermodulation interference from ARSRs. ARSRs sweep at 5 rpm, and our recovery time is on the order of microseconds. (Subsequent stages also need protection from amplified f1 and f2; M/A Com amp has IIP3=-2dBm)

  45. Flowdown Rqmt: Interference Quadrant Engineering, Inc. Experience Scanning Low Frequency Microwave Radiometer (SLFMR) [Goodberlet ’00] • SLFMR system: • f = 1413 MHz; B = 100 MHz • Phased Array antenna, not STAR • Designed NEDT=0.3K; verified in lab • Observed NEDT=5K over water (Tb=100K) • in field tests 20 miles from interference source • (Norfolk, VA) STAR-Light Implication: With just 15dB of Interference Rejection Filtering, we can drive that interference NEDT down to 0.15K

  46. Calibration: Hardware List STAR-Light Calibration Design: Pre-flight / In-flight Calibration To calibrate each antenna-receiver channel, we need * a hot load * a cold load to estimate the receiver temperature and overall receiver gain To calibrate each pair of channels, we need * correlated noise * uncorrelated noise to estimate the receiver correlation in magnitude and phase

  47. Calibration: Warm + Cold Slope a Gain V(d=0) x2 Tb=300K Tb= 77K V(d=0) Tb -Trec 0K 77K 300K To calibrate each antenna-receiver channel, we need * a warm load * a cold load to estimate the receiver temperature and overall receiver gain

  48. Calibration: Warm + Hot Delay = t Vi DSP Tb=300K Vq Dt Delay = t + Dt To calibrate each pair of channels, we need * correlated noise * uncorrelated noise (to determine Vi, Vq offsets) to estimate the receiver correlation in magnitude and phase

  49. Calibration: Receiver Two-Point Cal STAR-Light Calibration Design: Two-Point Calibration of a single channel Trec=300K B=20MHz t=1.5 s

  50. Calibration: Cold Noise Source STAR-Light Calibration Design: Quality of Cold Load Phase Uncertainties: Reflection +/- 6 deg Transmission +/- 12 deg L=0.3 dB VSWR=1.1 L=0.4dB VSWR=1.1 RCVR VSWR=1.1 50W at 77K VSWR=1.05

More Related