1 / 20

SDZ Construction: 120mm Tank Cannon

SDZ Construction: 120mm Tank Cannon. Inter-service Resident Range Safety Course (Intermediate). 120mm Ammunition. Legend for 120mm Tank Cannon. Constructing 120mm Tank Cannon SDZ. Construct a 120mm tank cannon SDZ for that weapon firing the M830 HEAT-MP-T cartridge into steel.

feoras
Télécharger la présentation

SDZ Construction: 120mm Tank Cannon

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SDZ Construction:120mm Tank Cannon Inter-service Resident Range Safety Course (Intermediate)

  2. 120mm Ammunition August 2003

  3. Legend for 120mm Tank Cannon August 2003

  4. Constructing 120mm Tank Cannon SDZ • Construct a 120mm tank cannon SDZ for that weapon firing the M830 HEAT-MP-T cartridge into steel. • Dimensions of the SDZ for this weapon system are given in DA-PAM 385-63, Chapter 12, Table 12-2. • First, plot the firing point, target, and then establish the gun target line. August 2003

  5. Plot the firing point. • Plot the target. • Establish the gun target line. August 2003

  6. From Table 12-2, find Distance X (steel). • Distance X = 6589m (ˆ6600m) • Annotate Distance X on the legend. Distance X August 2003

  7. At the firing point, measure 5° from the left and right of the gun target line. • Draw tic marks as shown. Distance X 5° August 2003

  8. Dispersion Area 5° • To establish the lateral limits of the Dispersion Area, draw a straight line from the firing position through each tic mark out to Distance X. Distance X • This completes the Dispersion Area. August 2003

  9. Dispersion Area • For the Ricochet Area, on Table 12-5, find the measurement for Distance W (steel). • Distance W = Distance X 600m • Lightly draw lines perpendicular to the limits of the Dispersion Area. August 2003

  10. Dispersion Area • Draw tic marks at the measurement for Distance W on the lines just drawn. • Draw straight lines through the tic marks. Distance X August 2003

  11. Dispersion Area P P • On Table 12-2, find the Angle P. • Angle P = 12° • At the firing point, measure 12° from the left and right limits of the Dispersion Area. Distance X 12° • Draw tic marks. August 2003

  12. Ricochet Area Dispersion Area • Draw a straight line from the firing point through each tic mark just drawn. • This completes the Ricochet Area. Distance X • Annotate the Ricochet Area on the legend. 12° P P August 2003

  13. Ricochet Area Dispersion Area • From the firing point, scribe an arc between the left and right limits of the Ricochet Area. Use Distance X as the radius. Distance X Distance X • Erase any unnecessary lines. August 2003

  14. Ricochet Area Dispersion Area • From the firing point, scribe an arc between the left and right limits of the Ricochet Area. Use Distance X as the radius. Distance X • Erase any unnecessary lines. August 2003

  15. Ricochet Area Dispersion Area • On Table 12-2, find the measurement for Area A. • Area A = 1,125m (ˆ1,150m) • Lightly draw lines perpendicular to the limits of the Ricochet Area. Distance X • Draw tic marks at the measurement for Area A. August 2003

  16. Ricochet Area Dispersion Area • Draw straight lines through the tic marks. • On Table 12-2, find the measurement for Area B. Distance X • Area B = 1,125m (ˆ1,150m) • Lightly draw a line extending the gun target line the measurement of Area B. August 2003

  17. Ricochet Area Dispersion Area • Draw a tic mark at the measurement for Area B. • Place the needle of the compass at the firing point and scribe an arc through the tic mark between the limits of Area A. • From the firing point, measure 25° to the right and left of the limits of the Ricochet Area. 25° August 2003

  18. Area B Area A Ricochet Area Dispersion Area • Draw tic marks. • From the firing point, draw straight lines out through the tic marks as shown. • This completes Areas A and B. Distance X • Erase any unnecessary lines. 25° August 2003

  19. Area B Area A Ricochet Area Dispersion Area • Draw tic marks. • From the firing point, draw straight lines out through the tic marks as shown. • This completes Areas A and B. Distance X • Erase any unnecessary lines. August 2003

  20. Legend for 120mm Tank Cannon August 2003

More Related