1 / 13

Panasonic KX-TDE With SIP Trunking

Panasonic KX-TDE With SIP Trunking. TDE0.0001 SIP presentation. Specifications subject to change without notice. Install Sip Card. Press the Activation Key. Install a V-SIPGW16 Card in an available slot and take the card out of service. Activation Key. Do Not Activate this key.

ferris
Télécharger la présentation

Panasonic KX-TDE With SIP Trunking

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Panasonic KX-TDE With SIP Trunking TDE0.0001 SIP presentation Specifications subject to change without notice

  2. Install Sip Card Press the Activation Key Install a V-SIPGW16 Card in an available slot and take the card out of service

  3. Activation Key Do Not Activate this key The Sip Trunk will use the 4-Channel IP Trunk License

  4. Shelf Property-Virtual SIP Gateway This will be the customers Static IP Address

  5. Card Property- Virtual SIP Gateway Enter the Preferred and Alternate DNS Server IP. This can be found in the CMD prompt by typing Ipconfig /all

  6. Port Property- Virtual SIP Gateway Change the first bin to Basic Channel. You may purchase up to 16 Additional Channels. The DSP16 comes with a license for 4, and the DSP comes with a license for 16. Each additional bin would be listed as Additional Channel for CH1

  7. Port Property- Virtual SIP Gateway Enter the IP Address given to you by the provider

  8. Enter the Extension Number given to you by the Provider

  9. Port Property- Register Re-enter the IP Address given to you by the Provider

  10. Port Property Select the Codec the Provider is using

  11. IPCMPR Card Property The IPCMPR Card must have the correct IP Address, Subnet Mask and Default Gateway entered

  12. 10.1 CO Line Settings Place the SIP Trunks in a Trunk Group by themselves

  13. 10.2 CO DIL Table Change the DID setting to DIL and assign the correct Ring Group

More Related