1 / 22

KX-HGT100 SIP-Phone

KX-HGT100 SIP-Phone. KX-HGT100 Configuration (1). Connect the HGT100 to the LAN via a suitable switch port Power on the unit (using PoE or the optional AC Adaptor) Check the LCD Display shows “Not configured Web Setting”

neona
Télécharger la présentation

KX-HGT100 SIP-Phone

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. KX-HGT100 SIP-Phone

  2. KX-HGT100 Configuration (1) • Connect the HGT100 to the LAN via a suitable switch port • Power on the unit (using PoE or the optional AC Adaptor) • Check the LCD Display shows “Not configured • Web Setting” • 4. Using your Browser (Internet Explorer etc), access http://192.168.0.241/ Not Configured Web Setting User name: KX-HGT100 Password: kx-hgt100

  3. KX-HGT100 Configuration (2) Unit Status: Unit has no Profile set. Registration is not possible

  4. KX-HGT100 Configuration (3) Network Status: STATIC IP is set by default Default IP: 192.168.0.241 Default Subnet Mask 255.255.255.0

  5. KX-HGT100 Configuration (4) LAN Connection: STATIC IP or DHCP Mode can be selected. (Static IP is Default = X ) NB: If you select ‘DHCP’ here, you will need to re-connect your browser using the allocated IP address before continuing to configure.

  6. KX-HGT100 Configuration (5) Enter IP Address etc of HGT100 here DNS Server Address can be added here (not required for TDE/NCP) After clicking ‘Save’, please power off/on the HGT-100

  7. KX-HGT100 Configuration (6) The allocated IP address can be checked by pressing the [i+] key on the HGT-100. To re-connect with a browser (after enabling DHCP), enter the allocated IP address) i.e. Allocated IP address 10.66.55.44 URL:http://10.66.55.44/ After clicking ‘Save’, power off/on the HGT-100. NB: When using DHCP, ensure that the PC connected to the PC-Port is on the same network segment as the HGT-100, otherwise Internet access from the PC will not be possible.

  8. KX-HGT100 Configuration (7) Username and Password: Modifies the HTTP Login User name and Password from default If Idle Timeout expires, unit will need to be powered off/on to re-open HTTP port. (“Special” Setting)

  9. KX-HGT100 Configuration (8) Basic Settings: Refer to next slide for language parameters; SIP Extension details and password (Telephone Number and SIP ID can match) SIP Proxy, Registrar and Domain information. For NCP Extension, enter the IP address of the NCP for all settings.

  10. KX-HGT100 Configuration (9) Basic Settings: (Example) (Stand-Alone SIP Telephone configuration with Gamma SIP Account) SIP Number, Account and password. SIP Proxy, Registrar and Domain (IP or DNS).

  11. KX-HGT100 Configuration (11) Advanced Settings: RTP Port Range (Voice Traffic) Codec Priority: PCMA/U = G711A/U G726-32 (N/A for TDA/NCP) G729A DTMF Type: Inband/Outband(RFC2833) SIP UDP Control port Diffserv(ToS) field settings One Time Caller Code either Permits or Denies CLIP sending on a per call basis, depending on the “My Caller ID” setting of the HGT100.

  12. KX-HGT100 Configuration (14) Configuration File: Basic Configurations can be backed-up and/or loaded via this screen. This allows a dealer to create a profile template and then modify only a small number of parameters (Number/Password etc)

  13. KX-HGT100 Configuration (15) Upgrade Firmware: Firmware updates can be managed easily from this page. Power off/on the unit to complete the upgrade.

  14. KX-HGT100 Configuration (16) Unit Maintenance: Lan/PC Port. Speed/Duplex Settings; Auto Negotiate 100Mbps/Full Duplex 100Mbps/Half Duplex 10Mbps/Full Duplex 10Mbps/Half Duplex Auto Sense is supported.

  15. KX-HGT100 User Setting (1) ‘PROGRAM’ KEY ‘OK’ KEY LCD DISPLAY ‘INFORMATION’ KEY ‘NAVI’ KEY AUTO HOLD Message Transfer ‘SP-Phone ‘Key SP-Phone, Hold and Message Keys have LED. ‘MUTE’ KEY ‘REDIAL’ KEY

  16. KX-HGT100 User Setting (2) OK Select Keys used: PROGRAM 1. Save Speed Dial? [OK]=YES Enter No. 1 No. 1 [OK]=SET 0123456789 Saved in No. 1 How to access :- Speed dial 0 ~ 9 1 AUTO ‘OFF-HOOK’

  17. KX-HGT100 User Setting (3) OK OK Select 2. Set Date + Time [OK]=YES Enter Year 2008 [OK] Enter Month/Day 05/07 [OK] ▲▼= AM/PM/24H 17:30PM [OK] Enter Time 17:30 [OK] 3. My Caller ID (Show) [OK]=YES Show/Hide CLIR (Show/Hide)

  18. KX-HGT100 User Setting (4) Select Select Select 4. LCD contrast ? [OK]=YES - ██████ + [OK]=YES 4 STEPS 5. Ringer Tone ? Ring 1 [OK]=YES Ringer Tone ? Ring 2 [OK]=YES 3 STYLES 6. Ringer Volume ? Ring 1 [OK]=YES Ringer Volume [OK] OFF - █████ + 4 Position + ‘OFF’ ‘OFF’ = SP-Phone LED Flashes

  19. KX-HGT100 User Setting (5) OK OK Select Select Select 7. Set Hold Music ? (#01) [OK]=YES #11 Settings (Inc ‘OFF’) 8. KeyTone Volume ? [OK]=YES Keytone Volume OFF - ███ + [OK] 3 Settings (Inc ‘OFF’) 9. Time AM/PM 24H (AM) [OK]=YES AM/PM/24H

  20. KX-HGT100 User Setting (6) OK OK Select Select 10. Refer to Slide #14 for supported languages Change Language ? English [OK] 11. STATIC IP Or DHCP Set Network ? (STATIC) [OK]=YES Default GW [OK] 192.168.000.001 Subnet Mask [OK] 255.255.255.0 IP Address [OK] 192.168.010.003

  21. KX-HGT100 User Setting (7) Select INFORMATION 1 6 Own number01234 Default Gateway192.168.000.001 5 2 StatusNormal Subnet Mask255.255.255.0 4 3 NetworkSTATIC IP Address192.168.010.003

  22. KX-HGT100 ‘Special’ setting (1) ‘Special’ Settings: Factory Default: To return the unit to it’s factory default settings, press [Program] + [OK] + [Mute] and power-on the unit. If successful, “Not Configured Web Setting” will be displayed in the LCD. HTTP Port open: To re-open the HTTP Port after initial setting or Idle time-out (default 30min) [OK] + [Mute] and power-on the unit. Firmware Roll-back: To rollback the firmware to the previously installed version [Program] + [Mute] and power-on the unit.

More Related