1 / 16

Contents

Click a Section Tab. Contents. Engine Overall Fuel System Engine Control System Service Points. Engine Overall. 1NZ-FE In-line 4-cylinder, 1.5-liter, 16-valve DOHC gasoline engine. DIS. ETCS-i. VVT-i.

gavin-gamble
Télécharger la présentation

Contents

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Click a Section Tab Contents

  2. Engine Overall • Fuel System • Engine Control System • Service Points

  3. Engine Overall • 1NZ-FE • In-line 4-cylinder, 1.5-liter, 16-valve DOHC gasoline engine DIS ETCS-i VVT-i DIS: Direct Ignition System; ETCS-i: Electronic Throttle Controlled System Intelligent; VVT-i: Variable Valve Timing Intelligent

  4. Engine Overall • Specification of 1NZ-FE Engine

  5. Engine Overall • Major difference from previous model Cranking hold function ETCS-i • Engine ECU (ECM) is located in engine compartment • CAN communication • Heated O2 Sensor: • B1 S1 • B1 S2 Charcoal canister is integrated in fuel pump module 6-layer plastic fuel tank

  6. Engine Overall • Serpentine Belt & Hydraulic Engine Mount

  7. Fuel System • Charcoal Canister • Charcoal canister is integrated in fuel pump module To purge valve Fuel Main Tube To atmospheric Charcoal Canister Fuel Pump Fuel Pump Module

  8. Electronic Throttle Control System – Intelligent is used Non-linear control & Idle speed control by ETCS-i Basic operation same as Yaris engine Engine Control System : Engine Number Location

  9. Engine ECU calculates optimal throttle opening angle that is appropriate for the respective driving condition (non-linear control) Engine Control System

  10. Engine Control System • Cranking Hold Function • Once the ignition switch is turned to “Start”, starter operates until engine starting (approx. > 600 rpm) “Start” “ON” Ignition Switch Operates Automatically Starter Operates Stop Stop Engine starts

  11. : Without this system : With this system Engine Control System • Cranking Hold Function • Operation (approx. 2 ~ 25 seconds) Start Ignition Switch ON ON ACC Power OFF Automatically Controlled Starter Relay ON OFF Judgment NE Signal Time

  12. Engine Control System • 2 TWC’s are used • O2 Sensors is used to detect oxygen concentration on exhaust emission Heated O2 Sensor B1 S1 TWC’s Heated O2 Sensor B1 S2 Previous

  13. DLC3 Engine Control System • Communication • CAN Communication is used for high speed data transmission, realize accurate control of power train and chassis system. J/C Engine ECU (ECM) Intelligent Tester II CAN • Skid Control ECU • Main Body ECU • Certification ECU • Meter ECU • etc.

  14. Engine & ECT ECU(ECM) Engine ECU (ECM) is located in engine compartment Engine Control System Water Proof Connector for Engine & ECT ECU

  15. Service Point • Opening Engine Hood • 2 holes available for serviceability Higher Engine Hood Opening 1 2 2 1

  16. Service Point • 6-layers, 4 materials plastic fuel tank • When scrapping the vehicle, drill a hole on the drain mark to drain the fuel before scrapping • SST for removing fuel pump retainer Drain Mark 09808-14020 (09808-01410, 09808-01420, 09808-01430) Charcoal Filter

More Related