1 / 35

Unit 3 Solutions

Unit 3 Solutions. Mr. Tsigaridis. Solutions. A solution is a particular type of mixture or combination of different substances Each substance retains its chemical properties (they are combined physically, not chemically) and The substances can be separated by non-chemical means:

greerj
Télécharger la présentation

Unit 3 Solutions

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unit 3 Solutions Mr. Tsigaridis

  2. Solutions • A solution is a particular type of mixture or combination of different substances • Each substance retains its chemical properties (they are combined physically, not chemically) and • The substances can be separated by non-chemical means: • filtration, evaporation, separatory funnel, distillation, or centrifugation.

  3. Solutions • A solution has two components: the solute and the solvent. • The solvent is the substance in greater amount. • It is usually a liquid, although it does not have to be. • It is usually water, but it does not have to be.

  4. Solutions • The solute is the substance in lesser amount. • It is usually a solid, although it does not have to be. • The occasional liquid solute will be mentioned. • Most often solutes are solid  think U are solid

  5. Solutions • A solution is a homogeneous mixture • Homogeneous means that the mixture is the same all the way through. • You could take two same-sized samples: one from the bottom and one from the top and they would be the same • Homogeneous mixtures do not settle out, a heterogeneous mixture would. • Blood is a heterogeneous mixture.

  6. Forming Solutions • Solutions form at different rates • Rate depends on 3 factors: • Agitation (stirring) • Temperature (↑KE) • Surface area (particle size) • The key is contact between solute and solvent

  7. Forming Solutions • The more surface area exposed to solvent, the faster the solute will dissolve • Also, increased movement and temp will increase collisions and speed up the rate

  8. Types of Solutions • Solid dissolved in solid (metal in metal  alloy) Ex. brass • Gas dissolved in gas (air mixture of 02, N2, CO2, etc…) • Liquid/Solid/Gas dissolved in a liquid

  9. Types of Solutions Liquids dissolved in liquid: • If liquids can dissolve in each other Miscible (like dissolves likes) Ex. Ethanol and Water (polar) • If liquids cannot dissolve in each otherImmiscible (unlike) Ex: Oil (nonpolar) and Water (polar)

  10. Types of Solutions • Solids: • If solid can dissolve in liquid Soluble • If solid cannot dissolve in liquid Insoluble

  11. Solubility • Solubility: the amount that dissolves in a given quantity of a solvent at a given temperature to produce a saturated solution • In other words: the solubility is how much will dissolve

  12. Solubility • Saturated = solution contains all the solute it can hold at a given temperature • Unsaturated = contains less solute than it can hold under existing conditions

  13. Solubility • Supersaturated =contains more solute than it would normally hold at a given temperature; usually not stable, may cause solution to crystallize and precipitate out of solution • *Dilute or Concentrated does not indicate if a solution is saturated or unsaturated!

  14. Solubility factors • Temperature affects solubility • Usually an increase in temp, increases solubility  solids • There are exceptions: • Yb (ytterbium) and gases • Also, NaCl only increases slightly

  15. Solubility factors • As gas temp increases, solubility decreases  more KE causes dissolved gas particles to escape thus decreasing solubility

  16. Solubility Curves • Solubility is plotted on the y axis – usually grams/100 ml • Temperature on x axis – degrees Celcius • Lines represent saturated solution

  17. For KI, @ 30oC, 180 g dissolve per 100ml • For KNO3, @ 90oC, 205 g dissolve per 100 ml (cm3) • Below the line, unsaturated • Above the line, supersaturated

  18. For KCl @ 90oC, 50g dissolve per 100 ml • How much would dissolve in 500 ml? 50g/100ml = xg/500ml Therefore….. X = 250 grams

  19. Molarity • The amount of solute that will dissolve in a solvent depends on the nature of both substances and on the temperature. • A solution with very little dissolved solute is said to be dilute • A solution with a large amount of dissolved solute is said to be concentrated • These are qualitative descriptions only, NOT numerical values.

  20. Molarity • As is clear from its name, molarity involves moles. • The molarity of a solution is calculated by taking the moles of solute and dividing by the liters of solution.

  21. Molarity • Example #1 - Suppose we had 1.00 mole of sucrose (it's about 342.3 grams) and proceeded to mix it into some water. It would dissolve and make sugar water. We keep adding water, dissolving and stirring until all the solid was gone. We then made sure that when everything was well-mixed, there was exactly 1.00 liter of solution. • What would be the molarity of this solution?

  22. Molarity • The answer is 1.00 mol/L. Notice that both the units of mol and L remain. Neither cancels. • A replacement for mol/L is often used. It is a capital M. So if you write 1.00 M for the answer, then that is correct. • And never forget this: replace the M with mol/L when you do calculations. The M is just shorthand for mol/L.

  23. Molarity • Example #2 - Suppose you had 2.00 moles of solute dissolved into 1.00 L of solution. What's the molarity? • The answer is 2.00 M. • Notice that no mention of a specific substance is mentioned at all. The molarity would be the same. It doesn't matter if it is sucrose, sodium chloride or any other substance. One mole of anything contains 6.022 x 1023 units.

  24. Molarity • Example #3 - What is the molarity when 0.75 mol is dissolved in 2.50 L of solution? • The answer is 0.30 M. • Now, let's change from using moles to grams. This is much more common. After all, chemists use balances to weigh things and balances give grams, NOT moles.

  25. Molarity • Example #4 - Suppose you had 58.44 grams of NaCl and you dissolved it in exactly 2.00 L of solution. What would be the molarity of the solution? • Two steps: • Step One: convert grams to moles. • Step Two: divide moles by liters to get molarity. • In the above problem, 58.44 grams/mol is the molecular weight of NaCl. Dividing 58.44 grams by 58.44 grams/mol gives 1.00 mol. • Then, dividing 1.00 mol by 2.00 L gives 0.50 mol/L (or 0.50 M). Sometimes, a book will write out the word "molar," as in 0.50-molar.

  26. Molarity • Do examples #5 and #6: • 5) Calculate the molarity of 25.0 grams of KBr dissolved in 750.0 mL. • 6) 80.0 grams of glucose (C6H12O6, mol. wt = 180. g/mol) is dissolved in enough water to make 1.00 L of solution. What is its molarity?

  27. Molarity • Here are the solutions: • 5) Calculate the molarity of 25.0 grams of KBr dissolved in 750.0 mL. Note the change from mL to L.

  28. Molarity • 6) 80.0 grams of glucose (C6H12O6, mol. wt = 180. g/mol) is dissolved in enough water to make 1.00 L of solution. What is its molarity?

  29. Molarity Practice Problems • 1) Calculate the molarity when 75.0 grams of MgCl2 is dissolved in 500.0 mL of solution. • 2) 100.0 grams of sucrose (C12H22O11, mol. wt. = 342.3 g/mol) is dissolved in 1.50 L of solution. What is the molarity? • 3) 49.8 grams of KI is dissolved in enough water to make 1.00 L of solution. What is the molarity?

  30. Molarity • http://dbhs.wvusd.k12.ca.us/webdocs/Solutions/Solutions.html

  31. Properties of Solutions • Clear, do not disperse light • May have color (but not always) • Will pass through a filter • Will not settle out on standing (not like a suspension) • No definite composition (unlike compounds)

  32. Properties of Solutions • Most common solvent is water • Water solutions are called aqueous (aq) shows substance is dissolved in water • Particle diameter < or = 1 nm (too small to settle out) • No Tyndall Effect – say what? • Most reactions take place in solutions

  33. Properties of Other Mixtures • Suspensions: heterogeneous mixtures with particles that settle out slowly while standing • Can be collected using filtration (sulfur and salt water) • Particles exhibit the Tyndall Effect, scattering of visible light in all directions • Ex. Clay and water mixture • Large particle size (> 100 nm in diameter) compared to solutions

  34. Properties of Other Mixtures 2. Colloid: heterogeneous mixture, particles do not settle out. • Intermediate particle diameter between 1 nm and 100 nm • Particles evenly distributed/dispersed • Particles do not settle while standing • Cloudy/milky in appearance when concentrated, but clear if dilute • Particles exhibit the Tyndall Effect • Ex. Glue, fog, paint, milk, jello

  35. Solubility is plotted on the y axis – usually grams/100 ml • Temperature on x axis – degrees Celcius • Lines represent saturated solution

More Related