1 / 32

EEM 3117 Automatic Control

EEM 3117 Automatic Control. Sezai Taskin, Ph.D. Assoc. Prof. Basic Ingredients of a Control System. 1. Objectives of Control 2. Control System Components 3. Results or Outputs. Example of Control System Application. Response Characteristics Example: Elevator. Open-Loop Control Systems.

harriethart
Télécharger la présentation

EEM 3117 Automatic Control

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. EEM 3117 Automatic Control Sezai Taskin, Ph.D. Assoc. Prof.

  2. Basic Ingredients of a Control System • 1. Objectives of Control • 2. Control System Components • 3. Results or Outputs

  3. Example of Control System Application

  4. Response CharacteristicsExample: Elevator

  5. Open-Loop Control Systems

  6. Closed-Loop Control Systems

  7. Feedback System

  8. Schematic diagram of a DC-Motor Control System

  9. https://www.youtube.com/watch?v=LAtPHANEfQo DC Motor, How it works?

  10. Antenna Azimuth Position Control System: System Concept

  11. Antenna Azimuth Position control System: Detailed Layout

  12. https://www.youtube.com/watch?v=EWguyxrMgQI

  13. Antenna Azimuth Position control System: Schematic

  14. Antenna Azimuth Position Control System: Functional Block Diagram

  15. Response of a Position Control System

  16. Test Waveforms Used in Control Systems

  17. Impulse • Infinite at t = 0 and zero elsewhere • Used for obtaining the transient response of the system and from this derive the mathematical model of the system

  18. Step • Represents a constant command • It is used, because both the transient response and the steady-state response are clearly visible and can be evaluated

  19. Ramp • Represents linearly increasing command

  20. Parabola • Similar to the previous case

  21. Sinusoid • Used to test a physical system to arrive at a mathematical model

  22. Example

  23. Answer • A = V0 (t)/Θi (t) = DV/10 =100/10 = 10 V/turn A

  24. Laplace Transform

  25. Inverse Laplace Transformation

  26. Laplace Transform Table

  27. Laplace Transform Theorems

  28. Laplace Transform Pairs

More Related