1 / 13

Nuclear Standards for Polymeric Piping

Nuclear Standards for Polymeric Piping. Aaron Forster, NIST            Engineering Laboratory NIST, MS 8615 100 Bureau Drive Gaithersburg, MD 20899 (301) 975-8701 Email: aaron.forster@nist.gov. NESCC HDPE Status: PPTG report released in January 2013

hewitt
Télécharger la présentation

Nuclear Standards for Polymeric Piping

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Nuclear Standards for Polymeric Piping Aaron Forster, NIST            Engineering Laboratory NIST, MS 8615 100 Bureau Drive Gaithersburg, MD 20899 (301) 975-8701 Email: aaron.forster@nist.gov

  2. NESCC HDPE Status: • PPTG report released in January 2013 • Held a workshop on February 28, 2013 to discuss merger of NESCC and ASME HDPE Roadmaps • Continue to Formalize Roadmap with communication between ASME and NRC • Held meeting at NRC on March 14, 2013 to discuss input on short term priorities. • Planning 2nd workshop for April 18, 2013 to further progress in creating a “Joint HDPE Roadmap” plan

  3. ASME Roadmap Implementation Planning Issues Standards Development Endorsement Resolutions 2 5 1 3 4 • Identify projects: utilize ASME’s HDPE Roadmap, NESCC’s report & other sources • Develop project scope • Establish tasks, schedule & budgets • Identify target code case or standard • Identify funding • Coordinate with other SDO’s, & government entities. • Obtain regulatory buy- in on the plan forward • Capturing Issues from Regulators and industry • Prioritization of Issues/concerns with input from NRC, DOE, SDOs and industry • Confirm Regulatory acceptance of priorities • Solicit Contracts with R&D Entities • Oversee R&D Projects • Review Results • Share Final Findings and Outcome with Committees/NRC • Confirm regulatory agreement of Issue Resolution • Standards development and writing • Revise or create Technical Concerns, Code Cases or Standards • Consensus process • Adoption to the Code • NRC participation in first 4 phases lead to standards endorsement • Obtain NRC endorsement of new or modified code cases or standards

  4. HDPE Roadmap Workshop EPRI Headquarters February 28, 2013 • Attendees: • DOE, NRC, ASME, ASTM, EPRI, NIST • Objective: • Coordinate the NESCC and ASME “Joint Roadmap” efforts. Let’s work from one template. • Identify potential short and long term R&D projects, deliverables, and standards impacts. • Prioritize projects • Identify current efforts on R&D, both confirmatory and new research • Deliverables: • Consensus Roadmap with basic prioritization • Develop an understanding of current efforts and future research efforts required • Methodology to track progress at ASME • Methodology to prioritize projects and sub-tasks • Strategy for Stakeholder engagement (Future Meeting)

  5. Move away from a numbered list to an actionable plan…. NESCC 10-013 – HDPE use by Catawba Nuclear Station, Steve Lefler, Duke Energy NRC Issues Regarding the use of HDPE piping in safety-related nuclear applications, Use of HDPE for Power Plant Piping Systems Workshop, June 7-10, 2010 North Carolina STP-NU-YYY ASME Code Development Roadmap for HDPE Service Pipe in Nuclear Service, under revision NESCC Polymeric Pipe Task Group Report, 2012, balloted for draft

  6. Prioritization: • Prioritize according to Code Deliverables: • Short term (under 3 years) • Specify as “A” priority • conditioned code case: N755 (Section III) and 808 (Section XI) • currently working to finalize these priorities. Hard deadline is April 18, 2013. • Med term (under 5 years) • Specify as “B” priority • Collecting identified research gaps. Negatives resolved to go from conditionally accepted to fully accepted. • Long term (under 10 years) • Accept conditions and details into ASME code • N755 (Section III) and 808 (Section XI) • Fully accepted code case with no conditions

  7. Interconnecting Roadmap

  8. Short Term (Conditioned CC)

  9. Medium Term (Unconditioned CC)

  10. Methodology to Commonize Roadmaps: • Basic level: • Do they have the same information • Answering the questions: • What are all the issues? • Why these issue are critical? • What needs to be done for conditional endorsement and then for full endorsement? • Priorities within a group? • What issues have been resolved, what activities under way including research and what research still needs to be done? • Project timing for new activities and research?.

  11. Methodology to Track Progress: • Go through 1 line of the ASME tracking spreadsheet • Go through 1 topic of the research plans • Need to switch to Excel during presentation

  12. Concerns: • Main concerns (personal view): • Acceptance of this path forward in ASME volunteer community • Developing a champion within the community of stakeholders • Stewardship of roadmap • Fostering communication between the stakeholders and regulators • Funding those tasks that require more than code writing in the short term

  13. Stakeholders Meeting • Objective: • Educate the economic and operational case for HDPE code acceptance, • Demonstrate the current regulatory and engineering challenges for HDPE usage that have limited deployment, • Identify impact of conditional approval on market development, • Present effort to manage existing ASME and NESCC R&D priorities into one Roadmap to support short and long term design, implementation, and regulatory goals, • Gain feedback from relevant industries regarding implementation and support of this process • Attendees: Utility Operators, Plant Design and Construction, Plastic Pipe producers, NRC, ASME

More Related