1 / 1

Volcanic ash modelling for aviation

Volcanic ash modelling for aviation . Sources of uncertainty in NAME. Why is volcanic ash a problem for aviation ?. Input parameters - Are the inputs used to drive the model accurate?

hisoki
Télécharger la présentation

Volcanic ash modelling for aviation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Volcanic ash modelling for aviation Sources of uncertainty in NAME Why is volcanic ash a problem for aviation? Input parameters -Are the inputs used to drive the model accurate? The accuracy of the NAME predicted ash location and concentration are extremely dependent on the accuracy of the eruption source parameters (ESPs) and the driving meteorology. Table 1 details these parameters. In an emergency response situation not all of these parameters are known so the simulations are run with pre-determined default parameters. The NAME default parameters are also outlined in Table 1. Once observational data becomes available the simulations are run with the updated ESPs to give a more accurate forecast. • Volcanic ash provides a significant hazard to aircraft by reducing visibility and causing both temporary engine failure and permanent engine damage. • The presence of ash can disrupt air traffic and as a result can incur large financial losses for the aviation industry. • For example, the eruption of Eyjafjallajökull in April 2010 disrupted European airspace, the busiest airspace in the world, for thirteen days, grounded over 95,000 flights (European Commission, 2011) and is estimated to have cost the airline industry up to €3.3 billion (Mazzocchi et al., 2010). Figure 1 What happens in the event of an eruption? In the event of an eruption the Volcanic Ash Advisory Centres (VAACs) issue hazard maps, based on forecasts of meteorological conditions, of instantaneous horizontal ash coveragein three vertically integrated layers of the atmosphere at 6 hourly-intervals. The boundaries of the ash show the maximum expected extentof the plume. Figure 1 shows the hazard map issued at 1800 on 14/04/2010 during the Eyjafjallajökull eruption. Table 1: Descriptions and default parameters used to initialise and drive NAME Parameteruncertainty- are the parameters used in the model correct? In NAME both advection, dispersion and loss processes are parameterised. Each parameterisation includes parameters based on empirical evidence or observation (see Table 2) that determine the motion of the particles and thus the final forecast. Each of these parameters have an associated uncertainty. Figure 1:The forecast hazard map issued by the London VAAC at 1800 on 14/04/2010 during the Eyjafjallajökull eruption in 2011. Contours shows the outermost extent of the volcanic ash cloud in 3 layers of the atmosphere (surface - flight level(FL) 200, FL200-FL350 and FL350-FL550). Hazard maps are created by running Volcanic Ash Transport and Dispersion (VATD) models. In the case of the London VAAC the VATD model used is the Numerical Atmospheric –Dispersion Modelling Environment (NAME) which is run at the UK Met Office. After the 2010 Eyjafjallajökulleruption the UK Civil Aviation Authority brought in new guidelines that not only require predictions of ash location but also ash concentration. VATD models can predict ash concentrations, however, currently there is no formal frameworkfor determining the uncertainties on these forecasts. The Robust Assessment and Communication of Environmental Risk (RACER) project aims to quantify these uncertainties with a view to producing a generic framework to provide information about volcanic ash risk which is both robust and easy to communicate andtransferable to other hazards. This project builds on existing work on volcanic ash carried out at Reading (e.g. Dacre et al., 2013) and new collaborations with the UK Met Office and Durham University. Table 2: The advection, dispersion and loss processes represented in NAME and their associated parameters. The shading indicates whether it is an advective/dispersive process (green) or a loss process (blue). • Structural uncertainty – the model is an approximation to reality • As with any model, there are some processes that are not represented in NAME. These include: • Aggregation of particles • Gravity current spreading • Particle diffusive convection (could rapidly remove ash near source) • The empirical mass eruption relationship does not explicitly take account of atmospheric stability, wind speed and direction or ambient/source moisture The NAME model • Future Work • Conduct sensitivity experiments to understand the relative importance of each of the sources of uncertainty. • Utilise in-situ, lidar and satellite observations of ash concentration to determine the skill of NAME in predicting the ash location and ash concentrations. • In partnership with Durham University, develop a statistical emulator of NAME to investigate more easily the whole of parameter space and thus co-dependencies between the uncertain parameters. • Create a transferable frameworkfor assessing uncertainty in modelling natural hazards. • Develop novel methods to communicate the uncertainty clearly for the end-users of the volcanic ash forecasts. One possibility is a probabilistic volcanic ash forecast. • Lagrangian particle model • Particles move with the resolved wind described by the meteorology plus a random component to represent the effects of atmospheric turbulence • Also includes loss processes • Used to model a wide variety of atmospheric dispersion events • Nuclear accidents • Airborne animal diseases • Routine air quality forecasts • References • Dacre, H., Grant, A. & Johnson, B. 2013 Aircraft observations and model simulations of concentration and particle size distribution in the Eyjafjallajokull volcanic ash cloud. Atmos. Chem. Phys 13, 1277–1291. • European Commission. 2011 Volcano Grimsvotn: How is the European response different to the Eyjafjallajökull eruption last year?, MEMO/11/346 [Available at http://europa.eu/rapid/press-release_MEMO-11-346_en.htm] • Mazzocchi, M., Hansstein, F., Ragona, M. 2010 The volcanic ash cloud and its financial impact on the European airline industry. CESifo Forum No 2:92-100 Figure 2: A schematic of NAME showing its structure and processes that are represented within it.

More Related