1 / 8

2-LASER Triple-Check System

2-LASER Triple-Check System. Engineering-Design 100, Section 10 Group 2 Xinli Wu The Pennsylvania State University. Matt Brady James Gallo Jon Lesner Alex Quehl. The Problem. Need for a more accurate velocity measurement allows for: Higher-quality picture (micron tolerances)

imaran
Télécharger la présentation

2-LASER Triple-Check System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 2-LASER Triple-Check System Engineering-Design 100, Section 10 Group 2 Xinli Wu The Pennsylvania State University Matt Brady James Gallo Jon Lesner Alex Quehl

  2. The Problem • Need for a more accurate velocity measurement allows for: • Higher-quality picture (micron tolerances) • Better handling of paper while being printed • Due to wear and tear, centripetal velocity of rollers changes as time progresses • Without accurate velocity, distorted picture is likely

  3. The Solution • Design measuring paper velocity • Measures velocity 3 times: • Time beam of laser 1 is blocked from sensor 1 • Time beam of laser 2 is blocked from sensor 2 • Time between lasers • Paper length and distance between lasers are both constant • Time /distance = velocity • Finds the mean of all 3, minimizing chance for a flawed calculation

  4. The Prototype • 2 rollers in front • 2 rollers in back • 2 lasers located between front and back rollers • Fixed distance is needed to find velocity • Sensor corresponding to each laser • Baffle to guide the paper • Framing

  5. Example • Internal clock able to measure to the millisecond • First, it takes 4 time measurements, then calculates 3 velocities, using d /∆t (distance / change in time), where: • d1 = d2 = 279.4 mm (i.e., length of paper) • d3 = 63.5 mm (i.e., distance between sensors) • ∆t1 = tb – ta • ∆t2 = td – tc • ∆t3 = tc - ta

  6. Example (Cont.)

  7. Conclusion • Optimal accuracy, considering the relatively small number of resources used • Eliminates the risk that comes with taking just one measurement • Ideal for a printer with such a great need for super-precise calculations

More Related