1 / 10

PLL and Noise in Analog Systems

PLL and Noise in Analog Systems. Analog and Digital Communications Autumn 2005-2006. LPF. VCO. FM Detection: Phase Lock Loops. Basic Task of PLL:. Lock the instantaneous angle of a VCO with the instantaneous angle of an external signal. i.e., lock (or track) the phase and frequency.

iola
Télécharger la présentation

PLL and Noise in Analog Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PLL and Noise in Analog Systems Analog and Digital Communications Autumn 2005-2006 CS477: Analog and Digital Communications

  2. LPF VCO FM Detection: Phase Lock Loops Basic Task of PLL: Lock the instantaneous angle of a VCO with the instantaneous angle of an external signal. i.e., lock (or track) the phase and frequency. CS477: Analog and Digital Communications

  3. Phase Lock Loops • Used in • Modulators and demodulators • Synchronizers • Frequency synthesizers • Multiplexers • Locks or synchronizes the external angle with the output angle of VCO • A negative feedback system based on phase comparison CS477: Analog and Digital Communications

  4. LPF PLL: Phase Comparator CS477: Analog and Digital Communications

  5. Integrator Linearized PLL Models Assumptions: 1. Incoming frequency is approximately the same as the VCO free running frequency 2. Phase error is small such that: Consider phases as the signals for further analysis CS477: Analog and Digital Communications

  6. Linearized PLL Models CS477: Analog and Digital Communications

  7. If is a lowpass filter, i.e., Then is a first-order lowpass filter First order PLL requires loop gain to be greater than the frequency deviation Thus second order PLLs are used in practice. FM Detection using Linear PLL Model (for FM input) CS477: Analog and Digital Communications

  8. (Non-linear channel) Non-linearities in FM FM transmission is robust against channel variations! We need a BPF; what are the requirements? (Carson’s rule) With this BPF, output is: Unlike AM, FM can combat amplitude non-linearities! CS477: Analog and Digital Communications

  9. LPF Noise • White Noise • Filtered/Colored Noise CS477: Analog and Digital Communications

  10. Noise Equivalent Bandwidth Average power in filtered noise: (Noise equivalent bandwidth) CS477: Analog and Digital Communications

More Related