1 / 12

The Detector Efficiency and Pad Mulitiplicity in Prototype Simulation (IV)

The Detector Efficiency and Pad Mulitiplicity in Prototype Simulation (IV). R.Han 2010.06.21. Outline. Reset Parameters in Polya Function Based on Cosmic Data Reset Function of Induced Charge for Charge Division between two Pads Transfer Digitization from Root Marco to MARLIN Based.

jamesjames
Télécharger la présentation

The Detector Efficiency and Pad Mulitiplicity in Prototype Simulation (IV)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The Detector Efficiency and Pad Mulitiplicity in Prototype Simulation (IV) R.Han 2010.06.21

  2. Outline • Reset Parameters in Polya Function Based on Cosmic Data • Reset Function of Induced Charge for Charge Division between two Pads • Transfer Digitization from Root Marco to MARLIN Based

  3. Polya Function • Motivation: Get the Charge Distribution from Simulation(only deposited energy in Simu) • At high fields, the avalanche distribution is described by a Polya function ? Average multiplication factor on the gap s K and bar(N) are the input for simulation. Get from data!

  4. Get Factor K and bar(N) from data Cosmic Data Small Chamber Trigger by Sci, Collected all the Pad’s signal Amplitude Vs Time (take point every 20ns, total have 2000points) Vmin >-0.002 as noise 7199 -> 3818 events Select the right avalanche range Get rid of background Baseline: The average of first 300 points And last 500 points the right avalanche range Average+-3sigma Vi=Vi-baseline

  5. Get Factor K and bar(N) from data The Collected Charge Distribution Cosmic Data, Small Chamber

  6. Simulation Vs Cosmic Data

  7. Simulation Vs Cosmic/Beam

  8. Charge Division For Pad Multiplicity S3 S2 1.0cm d S1 From « Induced Charge Distribution in Proportional Detectors » by E.Mathieson

  9. Charge Division

  10. Pad Multiplicity Vs Threshold S3 S2 1.0cm d S1 Simulation: d=0.09 Check Data : Do Cosmic test Check the Multi Defination at Data Check Simulation: The Input Function Definition of Pad…

  11. Transfer to Marlin • Run Mokka • events 1 GeV Muon for SDHCAL • Run Marlin • Add the induced charge to Marlin • Add the Pad Multi to Marlin • The Charge Division not yet…

  12. Next Step • Charge Division: do some cosmic test and analysis beam test data, • Learn run Pandroa and figure out to do something with it

More Related