1 / 7

Direct Connection Cross Cable for Full Duplex Network Set-up

This direct connection cross cable allows for full duplex transmission and reception at the same time, with no collisions. It can be used for network set-up, CobraNet configuration, and network redundancy. Multiple paths are possible, and the device remembers the data path.

janmoreau
Télécharger la présentation

Direct Connection Cross Cable for Full Duplex Network Set-up

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Direct connection Cross Cable Full duplex Transmit and receive at the same time No Collisions Network Set-up CIN CIN Cross cable OK

  2. Switch Can route data from one port to an other port Multiple paths possible Remembers the data path CIN CIN Switch CIN CIN Network Set-up OK

  3. Full duplex Transmit and receive at the same time No Collision CIN CIN Switch CIN CIN Network Set-up • Switch CIN CIN Switch CIN CIN OK

  4. Direct connection For configuration only One unit at the time CobraNet configuration PC CIN Cross cable

  5. Network connection For configuration only Advantage: All CobraNet units visible on one screen CIN CIN Switch CIN CIN CobraNet configuration PC • IP addresses (Recommended for CobraNet) • 192.168.100.1 – 192.168.100.199 CobraNet devices • 192.168.100.200 – 192.168.100.219 Network switches and infrastructure • 192.168.100.220 – 192.168.100.254 Computers Network redundancy CobraNet redundancy Unicast / multicast CobraNet config

More Related