SlideServe
Menu
Préférences
© SlideServe · v2026

Computer Performance & Storage Devices

janna-pierce avatar
18 diapositives · 304 Views · Oct 31, 2014

The boot process is the sequence of events that occurs when turning on a computer until it is ready to accept commands. Key steps include powering up, running diagnostics, loading the operating system, and checking configurations. This process relies on essential components such as RAM, ROM, and various storage devices like hard disks, USB drives, and DVDs. Each component plays a crucial role in ensuring the computer operates efficiently and stores data reliably. Learn about the relationships between these elements for a comprehensive understanding of computer performance.

Computer Performance & Storage Devices - slide 1
01 / 18Computer Performance & Storage Devices
1 / 17

Télécharger la présentation

Computer Performance & Storage Devices
Une image / un lien ci-dessous est fourni (tel quel) pour télécharger la présentation

Politique de téléchargement : le contenu du site vous est fourni TEL QUEL pour votre information et votre usage personnel ; il ne peut être vendu, concédé sous licence ni partagé sur d’autres sites sans l’accord de son auteur.Le contenu vous est fourni TEL QUEL, pour votre information et votre usage personnel uniquement. Téléchargez la présentation en cliquant sur ce lien. Lors du téléchargement, si vous ne parvenez pas à télécharger une présentation, l’éditeur a peut-être supprimé le fichier de son serveur.Pendant le téléchargement, si vous ne parvenez pas à obtenir une présentation, le fichier a peut-être été supprimé par l’éditeur.

F I N

Plus de contenu associé

Transcription de la présentation
  1. Computer Performance& Storage Devices

  2. Computer Performance

  3. Boot Process • Sequence of events that occurs between the time you turn on a computer and the time that it becomes ready to accept commands. • Purposes • Runs a diagnostic test to make sure everything is working. • Loading the operating system, so the computer can carry out basic operations.

  4. 6 events of the boot process: • Power up • Start boot program • Power-on self-test • Identify peripheral devices • Load operating system • Check configuration and customization

  5. Circuits • The path from one component of a computer to another that data uses to travel. • Circuits run between • RAM and the microprocessor • RAM and various storage devices

  6. Silicon Chip • Silicon is melted sand. • What the circuits are embedded into to keep them together.

  7. Megahertz (mHz) • A measurement used to describe the speed of the system clock. • A megahertz is equal to one million cycles (or pulses) per second. • 1.3 GHz means that the microprocessor’s clock operates at a speed of 1.3 BILLION cycles per second.

  8. RAM “Random Access Memory” The ability of a storage device to go directly to a specific storage location without having to search sequentially from a beginning location. Very volatile Cannot hold data when the power is off. Looses all data when power is lost. ROM “Read only memory” Drives can read data from disks, but cannot store new data on them. One or more integrated circuits that contain permanent instructions that the computer uses during the boot process. RAM vs. ROM

  9. Binary Number System • A method for representing letters or numbers using only two digits, 0 and 1. • Bit • Each 0 or 1 • Byte • 8 bits • Also referred to as Base 2 Binary Code.

  10. Memory Measurements • Bit • Each 0 or 1 • Byte • 8 bits • Kilobyte • Approximately 1,000 bytes • Exactly 1,024 bytes • Megabyte • Approximately 1 million bytes • Exactly 1,048,576 bytes • Gigabyte • Approximately 1 billion bytes • Terabyte • Approximately 1 trillion bytes or 1024 gigabytes • Petabyte • 1024 Terabytes

  11. Storage Devices • Used to keep data when the power to the computer is turned off. • Medium/media • Location where data is stored.

  12. Hard Disk • Usually mounted inside the computer’s system unit. • Can store billions of characters of data. • Stated in forms of bytes: • Gigabytes, Terabytes or Petabytes

  13. USB or Flash Drive • A flash memory card that plugs into the computer's USB port. Small enough to hook onto a keychain, it emulates a small disk drive and allows data to be easily transferred from one machine to another.  • Also known as a "flash drive," "pen drive," "keychain drive," "key drive," "USB key," "USB stick" and "memory key," numerous brand names have also been coined such as Lexar's JumpDrive and Trek 2000 International's ThumbDrive. 

  14. Portable Hard drive • A disk drive that is plugged into an external port on a computer such as USB. • Typically used for backup, but also as secondary storage, such units rival internal drives in capacity. For laptops, the PC Card slot may be used to connect a cable to a full-size drive, or the hard disk may be contained entirely inside the PC Card.

  15. CD-ROM • “CD – Read Only Memory” • Also called CD-R • CD-Read • Storage device that uses laser technology to read data that is permanently stored on compact disks, cannot be used to write data to a disk.

  16. CD-RW • “CD-Read Write” • A storage device that reads data from CD’s and also can write data to CD’s. • Similar to a CD-ROM, but has the ability to write to CD.

  17. DVD-ROM • “Digital Video Disks – Read Only Memory” • Reads data from CD’s (audio and data) and DVD’s (data or movie) • Cannot be used to write data to a disk.

  18. Resources Parsons, June Jamrich, and Dan Oja. Computer Concepts. Boston: Course Technology - Thompson Learning, 2002.