1 / 29

Chapter 2

Chapter 2. Diodes. Diode. Diode - A two-electrode (two-terminal) device that acts as a one-way conductor. pn-junction diode – A pn junction with a lead connected to each of its semiconductor materials. Forward Biased pn-Junction Diodes.

jenifern
Télécharger la présentation

Chapter 2

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 2 Diodes

  2. Diode • Diode - A two-electrode (two-terminal) device that acts as a one-way conductor. • pn-junction diode – A pn junction with a lead connected to each of its semiconductor materials.

  3. Forward Biased pn-Junction Diodes • The component is biased so that the cathode is more negative than the anode. • The voltage across the diode exceeds its barrier potential. • The diode conducts fully when VF is approximately 0.7 V (for silicon) or 0.3 V (for germanium). • The value of IF depends on the circuit voltage and resistance values.

  4. Reverse Biased pn-Junction Diodes • The component is biased so that the cathode is more positive than the anode. • The voltage across the diode is approximately equal to the applied voltage (V ). • The diode current is approximately 0 A (as indicated by the ammeter).

  5. Diode Models • Model – A representation of a component or circuit that demonstrates one (or more) of its characteristics. • There are three diode models: • The ideal model • The practical model • The complete model

  6. Ideal Diode Model • This model represents the diode as a simple switch that is either open (not conducting) or closed (conducting). • Used in the initial analysis and troubleshooting of a diode circuit.

  7. Practical Diode Model • This model includes the diode characteristics that are considered when: • Performing a mathematical analysis of a diode circuit. • Determining whether a given diode can be used in a given circuit or application.

  8. Complete Diode Model • This model is the most accurate of the diode models. • The complete diode model includes several diode characteristics that are generally considered as a part of: • Circuit development (engineering) • Special-case circuit analysis • Explaining the differences between predicted and measured circuit values.

  9. Ideal Diode Characteristics • When reverse biased (open switch), the diode: • Has infinite resistance. • Blocks current. • Drops the applied voltage across its terminals. • When forward biased (closed switch), the diode: • Has no resistance. • Does not limit current. • Has no voltage drop across its terminals.

  10. Forward Voltage (VF) • Knee Voltage (VK) – The voltage at which device current suddenly increases or decreases. • The practical diode model assumes that IF = 0 A until VF = VK. Once the diode begins to conduct, VF 0.7 V regardless of the value of IF.

  11. VF and Circuit Analysis

  12. Percentage of Error • Indicates the difference between a calculated value and its corresponding measured value.

  13. Peak Reverse Voltage (VRRM ) • VRRM is the maximum reverse voltage that won’t force a pn junction to conduct. • When VR > VRRM , diode reverse current (IR) increases rapidly as the depletion layer breaks down. • VRRM is a diode parameter that can be found on the component spec sheet.

  14. Forward Current and Power • Average Forward Current (I0 ) – Themaximum allowable value of dc forward current for a diode. • Forward Power Dissipation ( PD(max) ) – The maximum possible power dissipation of the forward-biased diode. • I0 and PD(max) are diode parameters that are listed on the component spec sheet.

  15. Component Substitution • A substitute diode can be used in a circuit if: • Its VRRM rating is at least 20% greater than the maximum reverse voltage produced by the circuit. • Its I0 rating is at least 20% greater than the average (dc) value of IF generated by the circuit. • Its PD(max) rating is at least 20% greater than the value of PF required by the circuit.

  16. Complete-Model Diode Curve

  17. Bulk Resistance ( RB ) • RB causes VF to increase when IF increases. • DVF in the complete diode curve is produced by IFRB.

  18. Diode Reverse Current (IR ) The low-level current through a reverse biased pn junction, made up of: • Reverse saturation current (IS) – A current caused by thermal activity in a reverse biased diode. • Surface leakage current (ISL) – A current along the surface of a reverse-biased diode.

  19. Temperature Effects on IF and VF • When temperature increases: • IF increases (at a specified value of VF) • VF decreases (at a specified value of IF)

  20. Temperature Effects on IR • IR increases with increases in temperature.

  21. Zener Diode • Zener diode – A diode designed to operate in the reverse breakdown region of its operating curve. • A large change in zener current (DIZ) produces a relatively small change in zener voltage (DVZ).

  22. Zener Current

  23. Zener Current Ratings

  24. Zener Impedance (ZZ ) • The zener diode’s opposition to any change in current.

  25. Zener Equivalent Circuits

  26. Light-Emitting Diode (LED) • LED – A diode that emits light when properly biased.

  27. Series Current-limiting Resistor (RS )

  28. Diode Resistance Test

  29. Meter Diode Test Function

More Related