Download
slide1 n.
Skip this Video
Loading SlideShow in 5 Seconds..
E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer PowerPoint Presentation
Download Presentation
E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer

E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer

156 Views Download Presentation
Download Presentation

E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer

- - - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

  1. Valiant Communications Limited Telecom Transmission Solutions E2, 2Mbps x 4 Opti Multiplexer Integrated E2, OLTE and Multiplexer INDIA Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, India Phone: +91-11 4105 5601, 91-11 4105 5602 Fax: +91-11 4105 5604, 91-11 2543 4300 E-mail: getinfo@valiantcom.com Website: http://www.valiantcom.com U.K. Valiant Communications (UK) Ltd 1, Acton Hill Mews, 310-328 Uxbridge Road, London W3 9QN, United Kingdom E-mail: gb@valiantcom.com Website: http://www.valiantcom.com U.S.A. Valcomm Technologies Inc. 4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America E-mail: us@valiantcom.com Website: http://www.valiantcom.com Updated : March, 2007

  2. E2 , 2Mbps x 4 - Opti Multiplexer Product Overview • VCL-E2, Opti Multiplexer (4E1) is an Integrated OLTE and multiplexer/ demultiplexer unit, basedon PDH (Plesiochronous Digital Hierarchy) technology • It multiplexes four 2.048Mbps (hereafter referred to 2Mbps) E1 tributaries into a single 8Mbps, E2 stream and then transports it as an optical signal on a Single Mode, 1300nm optical fiber cable, without the use of ant signal repeaters up to a distance of over 50KM (optical loss budget 30dBm) • On the demultiplex side, it receives the optical signal and demultiplexes it into 4, electrical E1 signals • This device provides data and extracted jitter free clock meeting the G.703 standards • These include loss of signal at E1, loss of signal at E2, loss of frame sync at E2, detection of AIS at E2 and bit error exceeding 1 in 1000 • VCL-E2, Opti Multiplexer is available in • 1310nm • 1550nm.

  3. E2 , 2Mbps x 4 - Opti Multiplexer Features • A compact solution that performs E1 to E2 multiplexing • and de-multiplexing and provides an 8Mbps • Optical interface (8Mbps OLTE) in a single card • Conforms to ITU recommendations G.742 • Performs Second order Mux as per G.742 • Loss of signal and AIS detection as per G.775 • Tributary and higher order loop backs supported • Supports tributary loopbacks for commands received from far end based on • stuff bit polarity • Single-card implementation • Highly reliable and compact • Standard CCITT Interfaces • Class I Laser

  4. E2 , 2Mbps x 4 - Opti Multiplexer Highlights • Remote and local terminal monitoring and control through a PC Com port using • VCL-Opti Multiplexer, Network Management System • Extensive alarms and status indication facility • Operates on nominal -48V DC input • Distributed on-board power supply • Microprocessor controlled with powerful diagnostic facilities for both remote and local systems • Local and remote loopback facility for the 8Mbps stream for diagnostics • Programmable auto-laser shut down feature for greater safety • Capable of synchronizing on any of the clock sources - internal, or • extracted (loop-timed).

  5. E2 , 2Mbps x 4 - Opti Multiplexer Front Panel View of VCL-E2 Opti Multiplexer Tx Rx VCL-E2 OPTI MULTIPLEXER 1 2 3 4 5 7 6 19 inch Shelf LEDs Indications +5V DC present -48V DC present Loss of signal at 2Mbps - channel 4 Loss of signal at 2Mbps - channel 3 Loss of signal at 2Mbps - channel 2 Loss of signal at 2Mbps - channel 1 AIS at 8Mbps Optical signal - Sync Green = Sync., Optical signal present Red = Loss of Sync., Optical signal absent.

  6. E2 , 2Mbps x 4 - Opti Multiplexer Rear View of VCL-E2 Opti Multiplexer(120 Ohms Ver.) (120 Ohms balanced E1 ports) 120 Ohms, RJ-45, E1 Interface Connectors - 4, E1 Channels Power Audio Alarm Video Alarm Network/System Management Port

  7. E2 , 2Mbps x 4 - Opti Multiplexer Rear View of VCL-E2 Opti Multiplexer(75/120 Ohms Ver.) (120 Ohms balanced, 75 unbalanced E1 ports) E2, Opti Multiplexer Back View 75 Ohms BNC, E1 Interface Connrctors - 4 E1 channels

  8. E2 , 2Mbps x 4 - Opti Multiplexer Technical Specifications 2Mbps, E1 Electrical Interface • Number 4 • Nominal bit rate 2048kbps • Bit rate tolerance ± 50ppm • Termination Impedance 120 Ohms • Line code HDB3 • Frame structure As per G.704 • Electrical Interface As per G.703 • Peak Voltage of a mark • For 120 W Balanced interface 3.0 V ± 0.3 V • 75 W Unbalanced interface 2.37 V ± 0.237 V • Peak Voltage of a space • for 120 W Balanced interface 0 V ± 0.3 V • 75 W Unbalanced interface 0V ± 0.237 V Continue..

  9. E2 , 2Mbps x 4 - Opti Multiplexer • Maximum Output Jitter 0.05UI • Maximum Input Jitter • 20Hz to 93Hz 1.5UI • 700Hz to 100Hz 0.2UI • Connectivity RJ-45 Connectors, (120 Ohms, balanced) and • BNC (75 Ohms, unbalanced) • Cable 120 Ohms balanced, 75 Ohms unbalanced • Permissible Attenuation 6dB (max) @1024KHz • Return Loss at input port • 51.2KHz to 102.4KHz >12dB • 102.4KHz to 2048KHz >18dB • 2048KHz to 3072KHz >14dB Continue..

  10. E2 , 2Mbps x 4 - Opti Multiplexer 8 Mbps, E2 Optical Interface • Transmitter • Type of Transmitter Class I Laser • Number 1 • Nominal bit rate 8.448Mbps, +/-30PPM Kbps • Transmit wavelength 1310nm • Transmit output 0dBm to -3dBm (average) • Extinction ratio >1:10 • Transmit Spectral Width <4nm • Receiver • Number 1 • Receiver sensitivity -37dBm (typical) • -36dBm (min) • Receive wavelength 1310nm • Operating wavelength range 1280-1335nm • Receiver dynamic range 20dBm • Optical Connectors FC-PC connector

  11. E2 , 2Mbps x 4 - Opti Multiplexer Valiant’s Products • Digital Access Cross Connects - E1 / T1 , E3, DS3, 10/100 BaseT Ethernet • Groomers (Hi-Z Non-intrusive Hi-Impedance Monitoring) • 1+1 APS (Automatic Protection Switching) • Echo Canceller & Voice Quality Enhancement Solutions - E1, T1, DS3 and STM-1 • E1 Drop-Insert (Add-Drop) Voice and Data Multiplexers • E1, T1, E3, DS3, Ethernet Converters • STM-1 Add Drop Multiplexer with Ethernet • GSM Gateways - E1/T1 • E1 PRI ISDN (Euro ISDN) Q.931 Multiplexers • Channel Banks • E2 (4 E1), 2/34 Mbps PDH Multiplexer, 34 Mbps OLTE • Remote Site Monitoring Equipment

  12. E2 , 2Mbps x 4 - Opti Multiplexer Thank you for your attention For more details visit us at our Website at http://www.valiantcom.com INDIA Valiant Communications Limited71/1, Shivaji Marg, New Delhi - 110015, India Phone: +91-11 4105 5601, 91-11 4105 5602 Fax: +91-11 4105 5604, 91-11 2543 4300 E-mail: getinfo@valiantcom.com Website: http://www.valiantcom.com U.K. Valiant Communications (UK) Ltd 1, Acton Hill Mews, 310-328 Uxbridge Road, London W3 9QN, United Kingdom E-mail: gb@valiantcom.com Website: http://www.valiantcom.com U.S.A. Valcomm Technologies Inc. 4000 Ponce de Leon, Suite 470Coral Gables, FL 33146United States of America E-mail: us@valiantcom.com Website: http://www.valiantcom.com