1 / 15

Personnel Lift Safety

Personnel Lift Safety. PERSONNEL LIFTS. Purpose : Lifts are a better way to reach overhead areas and are safer than ladders. However, there are safety precautions that must be followed. FALL PROTECTION. Scissors Lifts (Mobile Elevating Work Platform)

johnjjackson
Télécharger la présentation

Personnel Lift Safety

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Personnel Lift Safety

  2. PERSONNEL LIFTS Purpose: Lifts are a better way to reach overhead areas and are safer than ladders. However, there are safety precautions that must be followed.

  3. FALL PROTECTION • Scissors Lifts (Mobile Elevating Work Platform) • Fall protection is not necessary or required unless: • the railing has been removed • if both feet are unable to remain on deck

  4. FALL PROTECTION • Aerial Lifts (articulating & telescoping boom lifts) • Fall protection is required due to potential for being bounced out of lift or from climbing out of the basket.

  5. HAZARDS / PRECAUTIONS • TIP-OVER HAZARDS • Do not drive near drop-offs, holes, or loading docks • Do not raise platform on uneven or soft surfaces • Do not drive onto uneven or soft surfaces when elevated • Do not raise platform on slope or drive onto slope when elevated • Do not raise platform in windy or gusty conditions

  6. HAZARDS / PRECAUTIONS • TIP-OVER HAZARDS (continued) • Standing on railing to reach work area rather than repositioning the lift • Traveling to job location with lift in elevated position • Using lift with railing removed • Using lift on uneven or sloped surface • Using near power lines, junction boxes, etc. • Battery charging

  7. HAZARDS / PRECAUTIONS • ELECTROCUTION HAZARD • This machine is not insulated • Maintain safe clearances from electrical power lines and other apparatus • You must allow for platform sway, rock, or sag • This work platform does not provide protection from contact with or proximity to an electrically charged conductor

  8. HAZARDS / PRECAUTIONS • OTHER HAZARDS • Do not exceed rated load capacity • Do not use without railings and entry gate in place • Do not use work platform if parts are damaged • Do not use near moving vehicles • Do not stand or sit on guardrails • Do not use under the influence of alcohol or drugs

  9. HAZARDS / PRECAUTIONS • OTHER HAZARDS • Do not override safety devices • Do not leave unattended with key in switch • Do not use ladder or other device to increase size • or working height • Do not use with improperly inflated tires • Do not use with damaged wheels or tires

  10. HAZARDS / PRECAUTIONS • OTHER HAZARDS • An Aerial / Scissor shall not be modified for use as nor used as a forklift, hoist or material lift • It should not be used to raise heavy or bulky material from one elevation to another

  11. HAZARDS / PRECAUTIONS • Work platform is to be used by trained and authorized operators only. It is the operators responsibility to: • Read and understand all caution and danger warnings and operating manuals • Perform daily maintenance inspection • Have all worn or damaged parts replaced • Fasten entry gate/chain/bar • Use work platform only on hard level surfaces

  12. OPERATORS CHECK LIST • INSPECT AND/OR TEST THE FOLLOWING DAILY AND PRIOR TO INITIAL USE • Operating and emergency controls • Safety devices • Personal protective devices • Tires and wheels • Air, hydraulic and fuel system for leaks • Loose or missing parts • Cable and wiring harness • Placards, warnings, control markings and operating manual • Guardrail system • Battery fluid level • Hydraulic reservoir level • Coolant level

  13. BATTERY CHARGING • Battery changing and charging • Keep flames and sparks away. DO NOT smoke near batteries • Wear protective apron, gloves, and goggles when working with batteries • Immediately flush eyes with cold water if electrolytic acid is splattered into them • Turn Emergency Power Disconnect Switch to “OFF”

  14. BATTERY CHARGING- continued • Battery changing and charging • Connect charger AC plug to proper voltage source • Charge batteries. DO NOT leave charger unattended for more than two consecutive days. Severe overcharging and battery damage will result if charger fails to turn off • Disconnect charger from power source • Normal charging will take 10-14 hours

  15. GENERAL MAINTENANCE HINTS • Before attempting any repair work, disconnect battery ground negative (-) lead. • Properly position safety bar if the scissors assembly is raised. • DANGER • Do not reach through scissors assembly without safety bar properly positioned. • Preventative maintenance is the easiest and least expensive type of maintenance.

More Related