1 / 19

SOLID STATE DRIVES UNIT-II CONVERTER / CHOPPER FED DC MOTOR

SOLID STATE DRIVES UNIT-II CONVERTER / CHOPPER FED DC MOTOR. Contents. Review of dc motor equivalent circuit DC motor speed control Converters used in dc motor drives. SCR “phase-angle controlled” DC drives. By changing the firing angle, variable DC output voltage can be obtained.

joycemeyer
Télécharger la présentation

SOLID STATE DRIVES UNIT-II CONVERTER / CHOPPER FED DC MOTOR

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SOLID STATE DRIVESUNIT-IICONVERTER / CHOPPER FED DC MOTOR

  2. Contents • Review of dc motor equivalent circuit • DC motor speed control • Converters used in dc motor drives

  3. SCR “phase-angle controlled” DC drives • By changing the firing angle, variable DC output voltage can be obtained. • Single phase (low power) and three phase (high and very high power) supply can be used • The line current is unidirectional, but the output voltage can reverse polarity. Hence 2- quadrant operation is inherently possible. • 4-quadrant is also possible using “two sets” of controlled rectifiers.

  4. Single phase Full converter fed Dc drive

  5. Three phase converter fed DC drive

  6. Chopper fed DC drives • Supply is DC (maybe from rectified-filtered AC, or some other DC sources). • DC-DC converters (coppers) are used. • suitable for applications requiring position control or fast response, for example in servo applications, robotics, etc. • Normally operate at high frequency – the average output voltage response is significantly faster – the armature current ripple is relatively less than the controlled rectifier • In terms of quadrant of operations, 3 possible configurations are possible: – single quadrant, – two–quadrant and four–quadrant

  7. References G.K. Dubey, ‘Power semi-conductor controlled drives’, prentice hall of india,1989.

More Related