1 / 12

Update of detector hall in mountain region

Update of detector hall in mountain region. May 22, 2011 @LAL-Orsay Y.Sugimoto. Sample site. Exp-hall. Access tunnel. Shape of cavern. Study of 2 sample sites in Japan Both sites have very good geology of granite Depth of the cavern is less than 300m

Télécharger la présentation

Update of detector hall in mountain region

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Update of detector hall in mountain region May 22, 2011 @LAL-Orsay Y.Sugimoto

  2. Sample site Exp-hall Access tunnel

  3. Shape of cavern • Study of 2 sample sites in Japan • Both sites have very good geology of granite • Depth of the cavern is less than 300m  Shape of the cavern can be bullet shape rather than egg shape

  4. Access tunnel • Location of solenoid construction • In the cavern  larger cavern (DL~40m?), smaller access tunnel • On surface  smaller cavern, larger access tunnel • Cost is similar for both cases, but on-surface assembly is more convenient and less risk  On-surface assembly with large (h=11m) access tunnel • Access tunnel to 2nd detector • It has to go underneath the BDS tunnel, and should not be so large • Smaller access tunnel for the 2nd detector (SiD?) • Solenoid of the 2nd detector should be carried through the larger access tunnel, and go through the area of the 1st detector • What is the minimum size of the smaller access tunnel(input from SiD)? • Helium compressor for solenoids • He compressors can be placed in the large access tunnel • Distance between the detector solenoid and the compressor < 200m (?) • KEK cryogenic group (Y.Makida et al.) has joined this study

  5. Solenoid transport - 225t/5axles  450t with 2-trailers - Capable of ~7% slope

  6. Solenoid transport Enough space for detector solenoids

  7. Other issues • Detector service caverns • What is the required size to enclose detector power supplies, cooling plants for the detectors, power supplies and refrigerators for solenoids, etc? • Beam line height? • To be decided in this workshop • Do we need service tunnel and survey tunnel for accelerator? • Can we share the access tunnel for detectors with accelerator (DR, BDS)?

  8. Earthquake • Belle detector after 3.11 • Bell detector was rolled out from the beam line and fixed to the ground • 32 fixing bolts (M22) have been broken by the earthquake, and Belle detector moved 6 cm on the rail • How should platforms be supported on the occasion of big earthquake? • Move with the ground? • Isolated from the ground? Seismic isolation support for buildings

  9. Earthquake • Isolation from the ground can be achieved using air-pads, but • Enough gap between side wall is necessary • Positioning actuators should be retractable • Very flexible bellows should be placed between QD0 and QF1 to avoid damages to the inner detectors

  10. Towards DBD • Impact of 3.11 • Some collaborators of KEK who belong to facility group, cryogenic group, Acc. group are occupied with repairing works at KEK and JPARC • Hopefully, they will come back to ILC work by autumn • In cooperation with the experts mentioned above, we will make designs necessary for the mountain site: • Underground cavern and the access tunnel • Detector solenoid/cryogenic system • Other utilities

  11. backup

  12. RDR

More Related