1 / 41

Introduction to Diffusion MRI processing

Introduction to Diffusion MRI processing. The diffusion process. http://pubs.niaaa.nih.gov/publications/arh27-2/146-152.htm. dt_recon. Required Arguments: --i invol --s subjectid --o outputdir Example: dt_recon --i dt_recon --i 6-1025.dcm --s M111 --o dti. Main processing steps.

kellar
Télécharger la présentation

Introduction to Diffusion MRI processing

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Introduction to Diffusion MRI processing

  2. The diffusion process http://pubs.niaaa.nih.gov/publications/arh27-2/146-152.htm

  3. dt_recon • Required Arguments: • --i invol • --s subjectid • --o outputdir • Example: dt_recon --i dt_recon --i 6-1025.dcm --s M111 --o dti

  4. Main processing steps • # Eddy current and motion correction • (FSL eddy_correct) • # Tensor fitting • tensor.nii, eigvals.nii. eigvec?.nii • set of scalar maps: adc, fa, ra, vr, ivc • # Registration to anatomical space • (bbregister to lowb) • # Mappingmask, FA to Talairach space

  5. Other Arguments (Optional) --b bvals bvecs --info-dump infodump.dat use info dump created by unpacksdcmdir or dcmunpack --ecref TP use TP as 0-based reference time points for EC --no-ec turn off eddy/motion correction --no-reg do not register to subject or resample to talairach --no-tal do not resample FA to talairch space --sd subjectsdir specify subjects dir (default env SUBJECTS_DIR) --eres-save save resdidual error (dwires and eres) --pca run PCA/SVD analysis on eres (saves in pca-eres dir) --prune_thr thr set threshold for masking (default is FLT_MIN) --debug print out lots of info --version print version of this script and exit --help voluminous bits of wisdom

  6. Examples of scalar maps • FA: fractional anisotropy (fiber density, axonal diameter, myelination in WM) • RA: relative anisotropy • VR: volume ratio • IVC: inter-voxel correlation (diffusion orientation agreement in neighbors) • ADC: apparent diffusion coefficient (magnitude of diffusion; low value  organized tracts) • RD: radial diffusivity • AD: axial diffusivity • …

  7. FA

  8. ADC

  9. IVC

  10. Tractography examples • Trackvis and Diffusion Toolkit (http://www.trackvis.org/)

  11. CST on (color) FA map

  12. Under development:TRActs Constrained by UnderLying Anatomy (TRACULA) Anastasia Yendiki HMS/MGH/MIT Athinoula A. Martinos Center for Biomedical Imaging

  13. Tractography • Identify fiber bundles in cerebral white matter (WM) • Characterizing these WM pathways is important for: • Inferring connections b/w brain regions • Understanding effects of neurodegenerative diseases, stroke, aging, development … From Gray's Anatomy: IX. Neurology

  14. Diffusion in brain tissue • Differentiate tissues based on the diffusion (random motion) of water molecules within them • Gray matter: Diffusion is unrestricted  isotropic • White matter: Diffusion is restricted  anisotropic

  15. Diffusion MRI Diffusion encoding in direction g1 • Magnetic resonance imaging can provide “diffusion encoding” • Magnetic field strength is varied by gradients in different directions • Image intensity is attenuated depending on water diffusion in each direction • Compare with baseline images to infer on diffusion process g2 g3 g4 g5 g6 No diffusion encoding

  16. ? Deterministic vs. probabilistic • Determine “best” pathway between two brain regions • Challenges: • Noisy, distorted images • Pathway crossings • High-dimensional space • Deterministic methods: Model geometry of diffusion data, e.g., tensor/eigenvectors [Conturo ‘99, Jones ‘99, Mori ‘99, Basser ‘00, Catani ‘02, Parker ‘02, O’Donnell ‘02, Lazar ‘03, Jackowski ‘04, Pichon ‘05, Fletcher ‘07, Melonakos ‘07, …] • Probabilistic methods: Also model statistics of diffusion data [Behrens ‘03, Hagmann ‘03, Pajevic ‘03, Jones ‘05, Lazar ‘05, Parker ‘05, Friman‘06, Jbabdi ‘07, …]

  17.     Local vs. global • Local: Uses local information to determine next step, errors propagate from areas of high uncertainty • Global: Integrates information along the entire path

  18. Local tractography • Define a “seed” voxel or ROI to start the tract from • Trace the tract by small steps, determine “best” direction at each step • Deterministic: Only one possible direction at each step • Probabilistic: Many possible directions at each step (because of noise), some more likely than others

  19. Some issues • Not constrained to a connection of the seed to a target region • How do we isolate a specific connection? We can set a threshold, but how? • What if we want a non-dominant connection? We can define waypoints, but there’s no guarantee that we’ll reach them. • Not symmetric between tract “start” and “end” point

  20.     Global tractography • Define a “seed” voxel or ROI • Define a “target” voxel or ROI • Deterministic: Only one possible path • Probabilistic: Many possible paths, find their probability distribution • Constrained to a specific connection • Symmetric between seed and target regions

  21. Probabilistic tractography Have set of images Want most probable path • Determine the most probable path based on: • What the images tell us about the path Assume a multi-compartment model of diffusion [Jbabdi et al., NeuroImage ‘07] • What we already know about the path Incorporate prior knowledge on path anatomy from training subjects …

  22. Multi-compartment model Behrens et al., MRM ‘03 Jbabdi et al., NeuroImage ‘07 • Multiple diffusion compartments in each voxel: • Anisotropic compartments that model fibers (1, 2, …) • One isotropic compartment that models everything left over (0) 1 0 2 • We infer from the data: • Orientation angles of anisotropic compartments • Volumes of all compartments • Overall diffusivity in the voxel • Multiple fibers only if they are supported by data

  23. Anatomical priors for WM paths • WM pathways are well-constrained by surrounding anatomy • Sources of prior anatomical information: • Shape of the path in a set of training subjects • Anatomical regions around the path in the training subjects • Other types of anatomical constraints often used: • WM masks • Constraints on path angle • Constraints on path length

  24. TRACULA • TRActs Constrained by UnderLying Anatomy • Global probabilistic tractography • Prior info on tract anatomy from training subjects • No manual intervention in new subjects • Robustness w.r.t. initialization and ROI selection • Anatomically plausible solutions • Manual labeling of paths on a set of training subjects, performed by an expert • Anatomical segmentation maps of the training subjects, produced by FreeSurfer

  25. Preliminary results Data courtesy of Dr. R. Gollub, MGH • Manual labeling of: • Corticospinal tract (CST) • Superior longitudinal fasciculus (SLF) 1, 2, 3 • Cingulum • DTI reliability data set from Mental Illness and Neuroscience Discovery (MIND) Institute • 10 healthy volunteers scanned twice • DWI: 2x2x2 mm resolution, 60 gradient directions • T1: 1x1x1 mm resolution • Use manual labeling of 9 subjects to obtain path priors and path initialization for 10th subject

  26. SLF CST Reliability study Manual labeling by Allison Stevens and Cibu Thomas Visualization tool by Ruopeng Wang

  27. Test-retest reliability No info from training subjects With info from training subjects Visit 1 Visit 1 Visit 2 Visit 2

  28. Application: Huntington’s disease Data courtesy of Dr. D. Rosas, MGH Healthy Huntington’s stage 1 Huntington’s stage 3 Huntington’s stage 2

  29. MD changes in patients SLF1 SLF2 CST SLF3 0.1 Cingulum 0.001 P-values for T-test on mean MD of Huntington’s patients (N=33) and controls (N=22)

  30. Correlation with disease stage

  31. Application: Schizophrenia Data courtesy of Dr. R. Gollub, MGH SLF1 SLF2 CST SLF3 0.1 Cingulum 0.001 P-values for T-test on mean RD of schizophrenia patients (N=25) and controls (N=18)

  32. * * * * * ° ° * FA and RD changes * p<.05 ° p<.10 Left cingulum Right cingulum

  33. Current development • TRACULA: A method for diffusion tractography that combines a global probabilistic approach with prior knowledge on path anatomy • More detailed models of tracts • Improved inter-subject registration • Coming soon to a FreeSurfer near you!

  34. Acknowledgements Support provided in part by: • National Center for Research Resources • P41 RR14075 • R01 RR16594 • The NCRR BIRN Morphometric Project BIRN002, U24 RR021382 • National Institute for Biomedical Imaging and Bioengineering • K99 EB008129 • R01 EB001550 • R01 EB006758 • National Institute for Neurological Disorders and Stroke • R01 NS052585 • Mental Illness and Neuroscience Discovery (MIND) Institute • National Alliance for Medical Image Computing • Funded by the NIH Roadmap for Medical Research, grant U54 EB005149

  35. Acknowledgements MGH/Martinos Lilla Zöllei Allison Stevens David Salat Bruce Fischl & Jean Augustinack Oxford/FMRIB Saad Jbabdi Tim Behrens

  36. ONGOING: Registration of tractography • Goal: fiber bundle alignment • Study: compare CVS to methods directly aligning DWI-derived scalar volumes • Conclusion: high accuracy cross-subject registration based on structural MRI images can provide improved alignment • Zöllei, Stevens, Huber, Kakunoori, Fischl: “Improved Tractography Alignment Using Combined Volumetric and Surface Registration”, accepted to NeuroImage

  37. CST ILF UNCINATE Mean Hausdorff distance measures for three fiber bundles

  38. FLIRT FA-FNIRT CVS Average tracts after registration mapped to the template displayed with iso-surfaces

  39. Stages: • 1. Convert dicom to nifti (creates dwi.nii) • 2. Eddy current and motion correction using FSLs eddy_correct, • creates dwi-ec.nii. Can take 1-2 hours. • 3. DTI GLM Fit and tensor construction. Includes creation of: • tensor.nii -- maps of the tensor (9 frames) • eigvals.nii -- maps of the eigenvalues • eigvec?.nii -- maps of the eigenvectors • adc.nii -- apparent diffusion coefficient • fa.nii -- fractional anisotropy • ra.nii -- relative anisotropy • vr.nii -- volume ratio • ivc.nii -- intervoxel correlation • lowb.nii -- Low B • bvals.dat -- bvalues • bvecs.dat -- directions • Also creates glm-related images: • beta.nii - regression coefficients • eres.nii - residual error (log of dwi intensity) • rvar.nii - residual variance (log) • rstd.nii - residual stddev (log) • dwires.nii - residual error (dwi intensity) • dwirvar.nii - residual variance (dwi intensity) • 4. Registration of lowb to same-subject anatomical using • FSLs flirt (creates mask.nii and register.dat) • 5. Map FA to talairach space (creates fa-tal.nii) • Example usage: • dt_recon --i 6-1025.dcm --s M87102113 --o dti

  40. After dt_recon • # Check registration • tkregister2 --mov dti/lowb.nii --reg dti/register.dat \ • --surf orig --tag • # View FA on the subject's anat: • tkmedit M87102113 orig.mgz -overlay dti/fa.nii \ • -overlay-reg dti/register.dat • # View FA on fsaverage • tkmedit fsaverage orig.mgz -overlay dti/fa-tal.nii • # Group/Higher level GLM analysis: • # Concatenate fa from individuals into one file • # Make sure the order agrees with the fsgd below • mri_concat */fa-tal.nii --o group-fa-tal.nii • # Create a mask: • mri_concat */mask-tal.nii --o group-masksum-tal.nii --mean • mri_binarize --i group-masksum-tal.nii --min .999 --o group-mask-tal.nii • # GLM Fit • mri_glmfit --y group-fa-tal.nii --mask group-mask-tal.nii\ • --fsgd your.fsgd --C contrast --glm groupanadir

More Related